Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD STOP:000000xF4; SFC Scan results (iassdo.dll.mui corrupt)

17 Mar 2015   #1
Scyrge

Windows 7 Ultimate x64 SP1
 
 
BSOD STOP:000000xF4; SFC Scan results (iassdo.dll.mui corrupt)

Hey all, I've been randomly getting computer freezes and BSODs for the past couple weeks now, and I think I've narrowed it down to something dealing with either my hard drive or my windows install. I have a Kingston SV300 SSD with the latest firmware. For some reason my computer isn't saving minidump files so I can't look into the cause of the BSOD, so I figured I'd check hard drive diagnostics and windows diagnostics. My HD tests came back clean, but my SFC scan tells me that iassdo.dll.mui is corrupt and cannot be repaired.

Since I can't post the dump, I'll upload a picture I took of the BSOD along with the SFC results.


My System SpecsSystem Spec
.
18 Mar 2015   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Follow this to configure minidumps:

Dump Files - Configure Windows to Create on BSOD

Then when you next get a BSOD, follow this:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

My System SpecsSystem Spec
18 Mar 2015   #3
Scyrge

Windows 7 Ultimate x64 SP1
 
 

I already have my computer set to create the small memory dump (256kb) and it never does. I'm pretty sure the problem is that the computer hangs again while on the 'initializing disk' step of the BSOD. I think I've read online that it's due to the computer not recognizing the hard drive at that point. I'll go ahead and try switching it over to kernel dump mode.

I'll post again when (if) I get another BSOD - in the meantime, any idea what I can do about that corrupt dll.miu file?
My System SpecsSystem Spec
.

19 Mar 2015   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Test the disk....use DOS version to run LONG test:
SeaTools for DOS and Windows - How to Use
My System SpecsSystem Spec
23 Mar 2015   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I'd need to see the full CBS logs to be certain but this...
Code:
2015-03-17 04:49:59, Info                  CSI    00000319 [SR] Repairing 1 components
2015-03-17 04:49:59, Info                  CSI    0000031a [SR] Beginning Verify and Repair transaction
2015-03-17 04:49:59, Info                  CSI    0000031c [SR] Cannot repair member file [l:28{14}]"iassdo.dll.mui" of Microsoft-Windows-Networking-Internet_Authentication_Service_Iassdo.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-03-17 04:49:59, Info                  CSI    0000031e [SR] Cannot repair member file [l:28{14}]"iassdo.dll.mui" of Microsoft-Windows-Networking-Internet_Authentication_Service_Iassdo.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-03-17 04:49:59, Info                  CSI    0000031f [SR] This component was referenced by [l:266{133}]"Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.Windows Foundation Language Pack"
2015-03-17 04:49:59, Info                  CSI    00000322 [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
2015-03-17 04:49:59, Info                  CSI    00000324 [SR] Repair complete
...looks to me like the classic iasssdo/Pretty_Peacock mixup.
Unfortunately, so far as I know, no-one has managed to fix this without a repair install of the OS yet
My System SpecsSystem Spec
24 Mar 2015   #6
Scyrge

Windows 7 Ultimate x64 SP1
 
 

Unfortunately I no longer have my Windows disk. If it's nothing serious (and I haven't really notice anything), then I guess I just wont worry about it.

And pertaining to my HD, I've used Kingston's SSD Toolbox to run both a Smart Short test and a Smart Extended test. If you think it's not good enough and SeaTools would be better, I've got a copy of Hiren's Boot CD I could go dig up.

I haven't had a BSOD in a while, so no update on the dump file.
My System SpecsSystem Spec
07 Apr 2015   #7
Scyrge

Windows 7 Ultimate x64 SP1
 
 

Hey all, I had another string of bluescreens last night. For some reason my computer is still refusing to create dump files. I ran another long test on my SSD with seatools and all came back clean. Is it possible this could be caused by overheating?
My System SpecsSystem Spec
Reply

 BSOD STOP:000000xF4; SFC Scan results (iassdo.dll.mui corrupt)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Zoek scan results assistance
Zoek.exe v5.0.0.0 Updated 23-11-2014 Tool run by user01 on Sat 12/13/2014 at 9:41:16.94. Microsoft Windows 8.1 6.3.9600 x64 Running in: Normal Mode Internet Access Detected Launched: C:\Users\user01\Downloads\zoek.exe ==== Older Logs ====================== ...
System Security
CHKDSK and SFC Scan Results: What do they mean?
Greetings, First off, I was noticing slowness in the boot time of my computer and wanted to get to the bottom of the issue so I found online that it was suggested to run a SFC scan. Initially this failed with the message "Windows resource protection cannot perform the requested operation"....
Performance & Maintenance
How do I fix corrupt file reported in SFC scan results?
I performed an SFC /Scannow and have what appears to be one corrupt file left that needs fixing. However, I'm not sure what the report is telling me. Could a member here who knows about this take a look if I upload the file? Thanks.
Performance & Maintenance
McAfee GetSusp Scan Results
Hello, I have recently suspected that I have a malicious program on my computer. Before running, some .EXE files will give an error message about "cbFsMntNtf3.dll", which is a file of 0 bytes. I have since deleted it, and there have been NO further problems related to that error message. ...
System Security
PSI Scan Results
I just installed PSI 2.0 and started updating according to it's scan results, but I ran into two snags. Firstly, there were several .NET updates called for, but when I updated Imgburn, all of those .NET listing disappeared, and now show as being patched. I'm guessing that Imgburn must have done...
Software
BSOD 000000xF4
Hi all. Got this error today. very frustrating as i have no idea what it was. Ended up loading up bios reverting to factory settings and switching it off at the back and it's behaving again. but i've had weird things happening on the odd occasion. normally a restart resolves this but still...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App