Hello McFly (lol)
Here is a summary of one dump
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffa801395e5f0, 1, fffff80002e0d783, 2}
Could not read faulting driver name
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::OpenLocalAllocation+18a )
Followup: MachineOwner
---------
Processing initial command '!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck'
2: kd> !analyze -v;r;kv;lmtn;lmtsmn;.bugcheck
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa801395e5f0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002e0d783, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000002, (reserved)
Your BIOS and Video card need to be updated
Code:
[BIOS Information (Type 0) - Length 24 - Handle 0000h]
Vendor Award Software International, Inc.
BIOS Version F2
BIOS Starting Address Segment e000
BIOS Release Date 02/26/2009
BIOS ROM Size 100000
BIOS Characteristics
Download update here (this is for revision 1.0, make sure your motherboard is rev 1.0):
GIGABYTE - Motherboard - Socket 1366 - GA-EX58-UD3R-SLI (rev. 1.0)
Your Video card driver is also out of date
Code:
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0x5e54
Code:
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Tue Apr 19 21:22:32 2011 (4DAE3558)
CheckSum: 00050398
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
---------------
Display Devices
---------------
Card name: ATI Radeon HD 4800 Series
Driver Version: 8.850.0.0
DDI Version: 10.1
Download updated drivers here (13.9 is latest)
https://us.driverscollection.com/?H=...%204800&By=ATI
Also, since DirectX is referenced (even though I think this most likely isn't the culprit) so lets just make sure everything is ok with it
Run DirectX Diagnostic Tool
If for some reason, updating everything doesn't help, run Memtest86+ for at least 8 passes or if you receive ANY errors. If you receive any error, stop the test because either your Memory or memory controller is bad
RAM - Test with Memtest86+
Report back with the results.