BSOD 0x00000124 Over and Over


  1. Posts : 3
    Windows 7 Home Premium x64
       #1

    BSOD 0x00000124 Over and Over


    Not sure what this could be, Hard drive, Power supply, GPU? I have uploaded the debug file, Please help me if possible.


    CPU: i7-4770k

    MoBo: z97-A

    GPU(s): SLI Asus Strix 970s

    RAM: 32GB trident X 1866Mhz

    Hard drives: PCI-e RADIR express 240GB / 2TB Seagate Hybrid

    Cooler: Nepton 240m

    Power Supply: Cooler Master 1200w Silent Pro Gold
      My Computer


  2. Posts : 3
    Windows 7 Home Premium x64
    Thread Starter
       #2

    If you need anything else from me , please let me know
      My Computer


  3. Posts : 4,161
    Windows 7 Pro-x64
       #3

    All the dumps are indicating a L0 Cache error (CPU). I was looking for high temperature indications in the event logs and ran across a BIOS-EC sync error. I'll keep looking but check to see if there is a BIOS update for your motherboard.

    Code:
     
    Event[34984]:
      Log Name: System
      Source: ACPI
      Date: 2015-03-28T17:03:54.504
      Event ID: 15
      Task: N/A
      Level: Warning
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Harrison-PC
      Description: 
    : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
      My Computer


  4. Posts : 3
    Windows 7 Home Premium x64
    Thread Starter
       #4

    The Bios has now been updated to the latest Firmware 2205, I can assure you my CPU temps never get above 55C. Thank you for the help, please let me know if you find anything else
      My Computer


  5. Posts : 4,161
    Windows 7 Pro-x64
       #5

    The core temp is just something to look for when CPU Cache errors occur. When the CPU overheats, it affects the cache memory since it is next to the cores. I didn't see any throttling (heat indicator) but there were a lot of the EC errors which could lead to memory faults in drivers/software and there are a boat load of those.

    Run Memtest86+ for at least eight passes to make sure memory is good.

    If memory checks out, perform the Clean Start to make sure nothing there is trying to communicate with the BIOS or EC or has a faulty API. Especially the APC Power Chute software.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:48.
Find Us