Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while Patching ArcheAge, caused by driver ntoskrl.exe

12 Apr 2015   #111
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes, it's 179 updates.


My System SpecsSystem Spec
.
12 Apr 2015   #112
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I meant it's taking 25 minutes for this ONE update.
My System SpecsSystem Spec
12 Apr 2015   #113
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If it's SP1, that sounds about right. But it's usually worth the wait.
My System SpecsSystem Spec
.

12 Apr 2015   #114
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I unchecked that I think. It says "Security Update for Windows 7 for 64-bit systems (KB2653956)"

Edit: I still haven't touched it and it's still at that update.
My System SpecsSystem Spec
12 Apr 2015   #115
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you cancel it out, it will run again later. You will also be much better off running SP1 by itself. If you unchecked SP1, that is most likely why it won't install. SP1 is a prerequisite.
My System SpecsSystem Spec
12 Apr 2015   #116
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

While trying to run Windows Update, I keep getting bsoded at random times and not automatically restarting.
My System SpecsSystem Spec
12 Apr 2015   #117
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hi, this is what I am getting mostly

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 101, {31, 0, fffff880009ec180, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner
Which basically says to me, I have no idea.

However on one I found this

Code:
fffff880`0379a398  fffff880`01237be0Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
 iaStor+0x6be0
Which is one that I found several previous times, as I recall. So, please uninstall Intel Rapid Storage Technology.

I also got this which would explain most things.

Code:
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041287, An illegal page fault occurred while holding working set synchronization.
 Parameter 2 contains the referenced virtual address.
Arg2: 00000000022b1000
Arg3: 0000000000000000
Arg4: 0000000000000000
I am going to need you to run Memtest86+ It needs to run for 8 passes all at the same time. With 16 GB of Memory it will take usually around 18-20 Hours. I realize it is a pain, I've had to do it more times than I care to count, but it is critical. Make sure all fans are working and the case is free of dust, in other words good airflow and cool. Due to the length of time it is bes run overnight. here are the instructions. Please download it from the link given below.
Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
12 Apr 2015   #118
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Before you start that please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say 'windows found no integrity violations'. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

If it can't repair the files in 3 attempts, Please go to C:\Windows\Logs\CBS\CBS.log copy the whole folder and paste on your desktop. Right click it, select 'send to' > compressed zip folder. Upload the folder here with your next post.
My System SpecsSystem Spec
12 Apr 2015   #119
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Good spot Steve. I'll check back after work, I have to head out in a minute, and see how things go with your advice. I have a theory after taking a quick look at the dumps but will wait to see if your suggestions fix the issue first.
My System SpecsSystem Spec
12 Apr 2015   #120
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If testing your theory will take less than 20 Hours, I am sure she would like to hear it now. So would I. But, I could guess.
My System SpecsSystem Spec
Reply

 BSOD while Patching ArcheAge, caused by driver ntoskrl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod caused by USB3 driver
I have a weird problem with USB 3 drivers I think. This is my configuration: Motherboard: Gigabyte GA-B75M-D3V Cpu : Intel Core i5 3470 Ram : 8 Gb Corsair 1333 Mhz Video: Gigabyte GeForce GTX 660 2048MB DDR5 OC version Hdd : Western Digital 640 GB 7200 Rpm Case: Segotep SG-Z2
BSOD Help and Support
BSOD - ntoskrl.exe problem, error 0x0000009f
Hi Firstly, many thanks for running this amazing forum! Judging by the number of posts and responses you give, this is a vital service! So... I assembled PC a few weeks ago using a second hand intel motherboard and i3 but all all else new bits and all seemed ok for several weels but a couple...
BSOD Help and Support
BSOD caused by driver ndis.sys
I have rebooted into safe mode without networking, deleted all drivers for my RealTek network card (currently running Realtek PCIe GBE Driver Win7 7067 01/22/2013) and restarted the computer several times. This does not seem to alleviate the problem. I have spent hours researching this and can't...
BSOD Help and Support
BSOD caused by unknown driver?
I've been dealing with BSOD issues with my laptop for almost a year now, supposedly it was a hard drive issue and I had that replaced through my warranty in December. BSOD stopped... for about 36 days, just long enough for my warranty to have expired 15 days earlier. It's only gotten worse since...
BSOD Help and Support
BSOD 0D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in ntoskrl.exe and ntkrnlmp.exe
Over the last month, whilst the PC is idle (mostly overnight) I have had a few system hangs/crashes. The specific crashes that have resulted in a system Dump all point to the above modules as the offending elements I have, I believe followed the sticky detailing the process and attach the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App