Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while Patching ArcheAge, caused by driver ntoskrl.exe

04 May 2015   #191
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

EDIT: Sorry Steve, didn't see you reply while I was typing.

The nVidia driver again.
Code:
BugCheck D1, {200139, 9, 0, fffff88005bcbf71}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+19cf71 )

Followup: MachineOwner
---------

0: kd> lmvm nvlddmkm
start             end                 module name
fffff880`05a2f000 fffff880`0643a000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Mar 13 15:39:56 2015 (550304CC)
    CheckSum:         009CE879
    ImageSize:        00A0B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My last suggestion on that would be to try the 350.12 driver linked below and follow NVIDIA Drivers - Avoid Problems
download
Having said that, the other dump is a 0x7F which happens to be a double fault, that's either a stack overflow or a hardware problem. I'm leaning towards the GPU being faulty.
Code:
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050033
Arg3: 00000000000406f8
Arg4: fffff8a00315c130
Could you borrow a GPU from someone to test in your system?


My System SpecsSystem Spec
.
04 May 2015   #192
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please run Furmark again after doing the above, after it has been running for a few minutes, post a screen capture of the test in progress. Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
04 May 2015   #193
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok, so here's what I did.

Went into BIOS and set Optimized Defaults (my SATA is set to AHCI)
Clean installed the driver.
Ran sfc with no violations
Ran Furmark.

Posted is an sfc screenie, as well as a screenie 5 minutes into the Furmark test. Around 10 minutes it just sat at 55C and I ended the test at 20 minutes.
My System SpecsSystem Spec
.

04 May 2015   #194
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

That looks good. Can you test the system under your normal usage now and see if the BSODs return.
My System SpecsSystem Spec
04 May 2015   #195
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Strange thing about the bsods. They happen at random times. I could be doing something as simple as playing Flash games or watching Youtube, or I could be playing a full fledged game. But I'll operate as normal and post any bsods I find.
My System SpecsSystem Spec
04 May 2015   #196
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Look at the background on your Furmark Screen Shot and look at this one.

Attachment 358196
My System SpecsSystem Spec
04 May 2015   #197
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I couldn't see the forest for the trees there. Good spot Steve.
My System SpecsSystem Spec
04 May 2015   #198
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

These were the settings I used.
My System SpecsSystem Spec
04 May 2015   #199
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

There's an exact same screenshot here oddly enough.
My System SpecsSystem Spec
17 May 2015   #200
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

It's been a week and I've encountered no problems. No bsods, no nothing. The ONLY conflict (if you wanna do that) is that the color scheme switches to windows 7 basic I think when I play certain games.

With all the crap we've been playing with since April, until I encounter another problem, I will say thank you to all who have put up with me since then! You guys were more of a help than I could possibly imagine.
My System SpecsSystem Spec
Reply

 BSOD while Patching ArcheAge, caused by driver ntoskrl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod caused by USB3 driver
I have a weird problem with USB 3 drivers I think. This is my configuration: Motherboard: Gigabyte GA-B75M-D3V Cpu : Intel Core i5 3470 Ram : 8 Gb Corsair 1333 Mhz Video: Gigabyte GeForce GTX 660 2048MB DDR5 OC version Hdd : Western Digital 640 GB 7200 Rpm Case: Segotep SG-Z2
BSOD Help and Support
BSOD - ntoskrl.exe problem, error 0x0000009f
Hi Firstly, many thanks for running this amazing forum! Judging by the number of posts and responses you give, this is a vital service! So... I assembled PC a few weeks ago using a second hand intel motherboard and i3 but all all else new bits and all seemed ok for several weels but a couple...
BSOD Help and Support
BSOD caused by driver ndis.sys
I have rebooted into safe mode without networking, deleted all drivers for my RealTek network card (currently running Realtek PCIe GBE Driver Win7 7067 01/22/2013) and restarted the computer several times. This does not seem to alleviate the problem. I have spent hours researching this and can't...
BSOD Help and Support
BSOD caused by unknown driver?
I've been dealing with BSOD issues with my laptop for almost a year now, supposedly it was a hard drive issue and I had that replaced through my warranty in December. BSOD stopped... for about 36 days, just long enough for my warranty to have expired 15 days earlier. It's only gotten worse since...
BSOD Help and Support
BSOD 0D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in ntoskrl.exe and ntkrnlmp.exe
Over the last month, whilst the PC is idle (mostly overnight) I have had a few system hangs/crashes. The specific crashes that have resulted in a system Dump all point to the above modules as the offending elements I have, I believe followed the sticky detailing the process and attach the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App