Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while Patching ArcheAge, caused by driver ntoskrl.exe

07 Apr 2015   #31
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Just when I thought it was safe to go on the rift (League Of Legends)

I go to repatch League and watch Twitch at the same time, got bsoded, here ya go.


My System SpecsSystem Spec
.
08 Apr 2015   #32
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Persistent little bugger this isn't it?

Your nVidia driver has been flagged again this time.
Code:
fffff880`0bcbf8c0  fffff880`04cfa771*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0xcd771

1: kd> lmvm nvlddmkm
start             end                 module name
fffff880`04c2d000 fffff880`05638000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri Mar 13 15:39:56 2015 (550304CC)
    CheckSum:         009CE879
    ImageSize:        00A0B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download this earlier version from here and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install. Test for stability, if it still causes issues we'll look at stress testing the card.
My System SpecsSystem Spec
08 Apr 2015   #33
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

When I try to install the driver you gave me, I recieved the following message: "this graphics driver could not find compatible graphics hardware"

Also, encountered 2 more for ya.
My System SpecsSystem Spec
.

08 Apr 2015   #34
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I'm going to have to ask you to enable DV again, a driver is bugging out the system but it's not showing it's head again. This really is a tricky one.
My System SpecsSystem Spec
08 Apr 2015   #35
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Here ya go. Ran it for a few and then switched to safe mode to turn it off.
My System SpecsSystem Spec
08 Apr 2015   #36
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

OK, most of those dumps are 0x1A 0x41287 which means the internal memory management structures are corrupted. This is going to require a kernel memory dump. The other bugchecks are 0x50 which are pointing to hardware, but from the little I can glean out of those all I can see is the PTE being referenced is invalid.

I'm going to to ask some of the BSOD team to take a look in here, but I'll need you to set your system to record kernel dumps.
  1. Open Advanced System Settings
  2. Click on Settings in Startup and Recovery
  3. Select the Small memory dump dropdown box and select Kernel memory dump
Attachment 355534
Note   Note
Kernel memory dumps are usually very large files and cannot be uploaded to the forum. You'll need to upload kernel memory dumps to a file hosting site such as OneDrive.
My System SpecsSystem Spec
08 Apr 2015   #37
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

So it looks like this, correct?
My System SpecsSystem Spec
08 Apr 2015   #38
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, HikariChino. Boozad asked that I look into this problem. He and I often do this with each other. I would like to ask a question or two and make a couple of suggestions if you don't mind. If I ask something that has already been answered, please excuse me. Why do/did you have MSI Live Update? According to your System Specs you have an Asus Motherboard.

Also, would you check and make sure you have the latest Firmware for your Intel SSD.

Please make sure you have a GPU Temp monitoring program and watch your GPU temps very closely. This test will make your GPU temps increase rapidly and very high. If the temps go too high, stop the test. I would like you to run the Furmark Video Stress test. (Video Card - Stress Test with Furmark) Please run it until your temps level out. Also watch for any Artifacts during the test. Once the test keeps running and you see your temps stable, you can stop the test. This normally happens within a few minutes.

On your Mechanical Hard drives, Please run Seatools for DOS. SeaTools for DOS and Windows - How to Use. Please run the long and the short test.

Please also run Check Disk on your Mechanical hard drives. http://www.sevenforums.com/tutsearch.php?q=check%20disk

If you have any questions or do not understand anything, please feel free to ask. Neither I nor Boozad mind at all answering any questions.
My System SpecsSystem Spec
08 Apr 2015   #39
HikariChino

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The three times I ran Furmark, I get the following error (image sent). I did chkdisk on C:, dunno what I'm supposed to report on that.

I'm about to run the SeaTools tests since I'm about to go to bed.

As for the MSI files or whatever, I don't know where they came from. Boyfriend built the computer, so methinks it came from the new card he bought 4/1
My System SpecsSystem Spec
09 Apr 2015   #40
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Is your computer overclocked? If it is, set everything back to defaults. Also, if you don't already have them, please download CPUz. Open it and post screenshots (http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tab, you can select each Dimm Slot with a dropdown in the upper left. Just post screenshots of the Dimm Slots that have ram in them. CPU-Z | Softwares | CPUID
My System SpecsSystem Spec
Reply

 BSOD while Patching ArcheAge, caused by driver ntoskrl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod caused by USB3 driver
I have a weird problem with USB 3 drivers I think. This is my configuration: Motherboard: Gigabyte GA-B75M-D3V Cpu : Intel Core i5 3470 Ram : 8 Gb Corsair 1333 Mhz Video: Gigabyte GeForce GTX 660 2048MB DDR5 OC version Hdd : Western Digital 640 GB 7200 Rpm Case: Segotep SG-Z2
BSOD Help and Support
BSOD - ntoskrl.exe problem, error 0x0000009f
Hi Firstly, many thanks for running this amazing forum! Judging by the number of posts and responses you give, this is a vital service! So... I assembled PC a few weeks ago using a second hand intel motherboard and i3 but all all else new bits and all seemed ok for several weels but a couple...
BSOD Help and Support
BSOD caused by driver ndis.sys
I have rebooted into safe mode without networking, deleted all drivers for my RealTek network card (currently running Realtek PCIe GBE Driver Win7 7067 01/22/2013) and restarted the computer several times. This does not seem to alleviate the problem. I have spent hours researching this and can't...
BSOD Help and Support
BSOD caused by unknown driver?
I've been dealing with BSOD issues with my laptop for almost a year now, supposedly it was a hard drive issue and I had that replaced through my warranty in December. BSOD stopped... for about 36 days, just long enough for my warranty to have expired 15 days earlier. It's only gotten worse since...
BSOD Help and Support
BSOD 0D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL in ntoskrl.exe and ntkrnlmp.exe
Over the last month, whilst the PC is idle (mostly overnight) I have had a few system hangs/crashes. The specific crashes that have resulted in a system Dump all point to the above modules as the offending elements I have, I believe followed the sticky detailing the process and attach the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App