Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD errors with ntoskrnl.exe and one instance of tcpip.sys

07 Apr 2015   #11
jamesldavis

Windows 7 Home 64 bit
 
 

OK, I followed the instructions to boot into the Windows repair mode, pulled up the DOS prompt and x-copied the files using all the command line switches as specified.

After that I clicked to reboot. Near the point of completing the boot and loading up stuff, the system crashed with a blue screen. I've uploaded the cbs.log for that crash as CBS crash at boot.log A crash at boot had not happened before, so I booted to safe mode, shut down and booted again to normal mode without a problem.

I then ran the sfc /scannow again which reported corrupt files as before. The CBS.log for this last scan is also attached as CBS crash log after sfc scannow.log

Thanks again for you help.

James


My System SpecsSystem Spec
.
07 Apr 2015   #12
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Have uninstalled all Wise and IoBit software?
What AV is installed?

This is the first time that this fix has failed - let alone produced a BSOD/crash on boot.

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)
My System SpecsSystem Spec
07 Apr 2015   #13
jamesldavis

Windows 7 Home 64 bit
 
 

After the XCOPY procedure, my web browsers display all pages in a paper white background, and I think some graphics are also not displayed. How to revert to the usual appearance of web pages?
My System SpecsSystem Spec
.

07 Apr 2015   #14
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

From the results of the SFC scan, the XCOPY procedure failed completely - I doubt ithad anything to do with the other problems you're experiencing.

It would probably be worthwhile to do a CHKDSK and post the logs - I see you have actually already done one, so I just need the log...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.
My System SpecsSystem Spec
07 Apr 2015   #15
jamesldavis

Windows 7 Home 64 bit
 
 

Yes, I have uninstalled all Iobit software.

Avast anti-virus is installed.

I ran the Windows 7/64bit/SP2 hotfix update you pointed to, then ran the sfc /scannow.

The resulting cbs.log is attached.

thanks,

James
My System SpecsSystem Spec
07 Apr 2015   #16
jamesldavis

Windows 7 Home 64 bit
 
 

I've been running chkdsk at restart with fix after every crash.

Attached are a zip of what I take to be the last chksisk shown in event viewer and also a zip of all of them.
My System SpecsSystem Spec
08 Apr 2015   #17
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

Quote   Quote: Originally Posted by jamesldavis View Post
After the XCOPY procedure, my web browsers display all pages in a paper white background, and I think some graphics are also not displayed. How to revert to the usual appearance of web pages?
That's the first time I've heard of this happening also Noel.

James,
Check to see if any settings changed in Control Panel\All Control Panel Items\Personalization, specifically look for any confirmations to use the High Contrast White Theme. http://White background's problem in web pages | kioskea.net

2.) How many times did you run the SFC scan? Sometimes it may take three or more runs with re-boots in between for it to correct any violations it may find.
My System SpecsSystem Spec
08 Apr 2015   #18
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

SFC VERY rarely requires more than one pass to fix everything it's capable of fixing - I can only recall three incidents of it happening in these forums without any apparent external action.

The more common reason for the copy to fail is that there's an extra level in the folder, or there was a typo in the command used.
The power of xcopy is such that it will create the target folders as necessary without regard to whether they make sense.


Let's check for the extra level...

Open an Elevated Commmand Prompt, and run the following commands

DIR C:\media64
DIR C:\Windows\winsxs\media64
DIR C:\Windows\winsxs\me*.*

post the results.


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
08 Apr 2015   #19
jamesldavis

Windows 7 Home 64 bit
 
 

I had run sfc /scannow just once yesterday, so I ran it three more times just now with a reboots in between scans. In one instance Windows complained about not shutting down correctly.
All scan feedback in the DOS box was the same each time with report of error or errors that could not be fixed. Attached is the Log file.
My System SpecsSystem Spec
08 Apr 2015   #20
jamesldavis

Windows 7 Home 64 bit
 
 

I started over just now and booted to windows repair, then ran the xcopy media64 procedure again. On restart I ran the sfc /scannow and for the first time it reported that no corrupt files were found.

Is there more to be done?
My System SpecsSystem Spec
Reply

 Random BSOD errors with ntoskrnl.exe and one instance of tcpip.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODS, cause: ntoskrnl.exe, tcpip.sys, Ntfs.sys, dxgmms1.sys
Hello, I'm getting random BSODS mostly on startup and during casual browsing eg. tasks which isn't that demanding but also occasionally during gaming. I've searched around but I'm still clueless and I hope somebody is more familiar with these error codes than I am. Trying to debugg these...
BSOD Help and Support
Random BSOD's, mainly ntoskrnl.exe but also other errors.
Hello. I've had BSOD's going on for a while and I've had no idea why until recently when i found out it was because of a .sys file called atikmpag.sys was failing. I solved that by installing new drivers for my graphics card. Then i was "BSOD-free" for about twelve hours until this new...
BSOD Help and Support
Random BSOD, ntoskrnl.exe tcpip.sys
Hey I'v been trying to replicate my BSOD problem for that last day or so trying to nail down what it is but I just cant figure it out. It seems to happen at random times. I can have just a few programs turned on and it can go. At first I thought it was steam cause it always seemed to be open in the...
BSOD Help and Support
Random BSODs about once a day or so with ntoskrnl.exe and tcpip.sys.
I've had my computer for about 3-4 years and just recently I have been getting random BSODs sometimes when playing games, but also on other times just when browsing the web or opening/closing programs. I've already replaced my HD and did a Clean install of Windows 7. I also replaced video card...
BSOD Help and Support
Random BSOD: ntoskrnl.exe, afd.sys, tcpip.sys, atikmdag.sys & win32k.s
Hi all, Been getting a few BSODs over the past couple of days. No particular time it happens, could be playing a game or browsing the net. I haven't changed any hardware and no software has been installed in this time. Upgraded my graphics last month but thats about it. I've uploaded a...
BSOD Help and Support
BSOD in random moments, ntoskrnl.exe, different errors
Hey guys I'm new in forum. My hardware is Notebook Dell Inspiron N5010 15R Alu Intel core i5-460M Ati Radeon HD5650 1GB 4GB DDR3 1333MHz I have my notebook for almost 2 years and I always had problems with bluescreens. Errors are always different, from KMODE_EXCEPTION_NOT_HANDLED,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App