Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Lots of BSOD problems 1A 3B 0A 50 1E C4 BE 4E

01 May 2015   #21
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

 nVidia Driver

Your nVidia driver has been flagged. Download the previous version from here and save it to your desktop. Then follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.
Code:
fffff880`0b88b268  fffff880`04990d81Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0x109d81

2: kd> lmvm nvlddmkm
start             end                 module name
fffff880`04887000 fffff880`052bf000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Wed Apr 08 21:32:37 2015 (55259065)
    CheckSum:         009F7AE7
    ImageSize:        00A38000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
 SFC /SCANNOW

Open an elevated command prompt and type in or copy and paste sfc /scannow and hit enter. Post back with the results.


My System SpecsSystem Spec
.
01 May 2015   #22
Laith

Windows 10 Professional x64
 
 

Hm, it's still blaming memory corruption. Have you tried 8 passes on each stick(take all the other sticks expect one and take the test for 8 passes and switch and do the samething?)
My System SpecsSystem Spec
01 May 2015   #23
beardo

Windows 7 Ultimate x64
 
 

Thanks for the replies again guys.

Boozad, I'd already used DDU to get rid of all traces of NVIDIA drivers, and reinstalled the latest. Just gone through what you suggested and installed the version previous to this one but it's still crashing.

Laith, I ran MemTest for about 48 hours straight with no errors, so far I must have done about 40 passes and haven't seen a single error yet.
My System SpecsSystem Spec
.

01 May 2015   #24
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

If you've run MemTest86+ for that many passes with no errors there's nothing wrong with your RAM. Memory Management doesn't necessarily mean there's a problem with your physical memory, it could be a bad driver passing through virtual memory or trying to alter the kernel by passing bad info into kernel mode. It could be accessing an address that's just simply bad or doesn't exist.

Having said all of that, follow the procedure outlined below. Make sure you've read and understood it all before proceeding.




Lots of BSOD problems 1A 3B 0A 50 1E C4 BE 4E Diagnostic Test Lots of BSOD problems 1A 3B 0A 50 1E C4 BE 4E
 DRIVER VERIFIER

Driver Verifier will stress your drivers and cause BSODs if any fail. Follow this tutorial to enable/disable it. Driver Verifier - Enable and Disable

Enable Driver Verifier but only enable these options:
  • Standard settings and IRP logging step 3.
  • Don't enable Force Pending I/O Requests
warning   Warning
Make a System Restore point before enabling Driver Verifier.

Note   Note
Your system will act very sluggishly while DV is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.


Post any resulting dump files.

We'll look at other possibilities after ruling out drivers.
My System SpecsSystem Spec
01 May 2015   #25
beardo

Windows 7 Ultimate x64
 
 

I've already run driver verifier for a while, some of the dump files are from when I was running that, but I can stick it on again if you think that would help and then post another set of logs once it's BSOD'd a few more times?
My System SpecsSystem Spec
01 May 2015   #26
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

It's hard to pick the DV ones out from your logs unfortunately as there are so many dumps, the chances are they're the ones blaming the nVidia driver. I'll have another browse through and see if I can pick then out, hold fire on that for now. What you can do in the meantime is stress test your GPU. Perform the test below and make a not of your GPU temperatures at idle and under load. I know you've already done it but the temperatures would be handy.

Run Furmark to stress test your GPU. Video Card - Stress Test with Furmark

Note   Note
Run Furmark for around 30 minutes.

warning   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them, if the temperature continues to rise steadily once it has reached 80C be prepared to stop the test so as to not damage your GPU.
My System SpecsSystem Spec
01 May 2015   #27
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Have you run any of the diagnostics provided by Samsung on your SSD?
Code:
7: kd> !pool fffffa80098f0130
GetPointerFromAddress: unable to read from fffff80003316100
Pool page fffffa80098f0130 region is GetUlongFromAddress: unable to read from fffff800033161c0
Nonpaged pool
GetUlongFromAddress: unable to read from fffff80003284a38
Unable to get pool big page table. Check for valid symbols.
fffffa80098f0000 is not valid pool. Checking for freed (or corrupt) pool
Bad allocation size @fffffa80098f0000, zero is invalid

***
*** An error (or corruption) in the pool was detected;
*** Attempting to diagnose the problem.
***
*** Use !poolval fffffa80098f0000 for more details.


Pool page [ fffffa80098f0000 ] is __inVALID.

Analyzing linked list...
[ fffffa80098f0000 ]: invalid previous size [ 0x80 ] should be [ 0x0 ]
[ fffffa80098f0000 --> fffffa80098f0060 (size = 0x60 bytes)]: Corrupt region


Scanning for single bit errors...
[ fffffa80098f0000 ]: previous size [ 0x80 ] should be [ 0x0 ]

7: kd> !poolval fffffa80098f0000
Pool page fffffa80098f0000 region is Nonpaged pool

Validating Pool headers for pool page: fffffa80098f0000

Pool page [ fffffa80098f0000 ] is __inVALID.

Analyzing linked list...
[ fffffa80098f0000 ]: invalid previous size [ 0x80 ] should be [ 0x0 ]
[ fffffa80098f0000 --> fffffa80098f0060 (size = 0x60 bytes)]: Corrupt region


Scanning for single bit errors...
[ fffffa80098f0000 ]: previous size [ 0x80 ] should be [ 0x0 ]
My System SpecsSystem Spec
01 May 2015   #28
beardo

Windows 7 Ultimate x64
 
 

Thanks for the replies again.

First I'm attaching some more logs just in case, the first 4-5 will be with DV.

Second I did actually run FurMark a short while ago but just ran it again for about 35 minutes. Resting temp is about 32, stress temp is 67, didn't go any higher than that.

Third I've run Samsung Magician (not sure if there's anything else?), firmware is updated, drive shows as good, also used Seagate SeaTools which came up with no errors on any of my drives.
My System SpecsSystem Spec
02 May 2015   #29
Laith

Windows 10 Professional x64
 
 

Boozad, i certainly know that. But WinDBG blames memory corruption.
As it turnes out the 2 latest BSODs are caused by my enemy, BAD_POOL_HEADER.
Almost all the latest blames the kernel, one still thinks its memory corruption and 1 blames the hardware.
Run IntelBurnTest.
CPU - Stress Test Using IntelBurnTest
My System SpecsSystem Spec
03 May 2015   #30
beardo

Windows 7 Ultimate x64
 
 

Thanks for the reply again!

I ran the Intel burn test, but it stopped after 2 passes with an error message. I've attached screenshots of the message and the window, as well as the HWiNFO window...
My System SpecsSystem Spec
Reply

 Lots of BSOD problems 1A 3B 0A 50 1E C4 BE 4E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Lots of BSOD problems lately
Hi there everybody! Lately I had many BSODs and I do not know why is that. So I included my dump memories. BSODs happened while playing games, watching films even while doing nothing. I have everything installed the same way as my last PC and there were none BSODs so I am really helpless at this...
BSOD Help and Support
Lots of problems and can't re-install
Hi everyone, I won't go into details but I have 2 problems left on my PC whereby the only fix is a repair of windows. I put the DVD in, followed the tutorial on here but it keeps telling me the disk is an older version of windows than the one on my PC. The thing is this DVD I'm using to try to...
General Discussion
Lots of display problems
Yesterday my PC was working fine. I am having Windows 7 Ultimate x32 bit. Today I logged in and here is what happened 1) Only black screen instead of wallpaper. 2) No icon being loaded for everything. 3) This is a background which I applied again still no background.
Customization
Lots of problems
Two nights ago I had realized that I lost all sound and noises that Win7 usually makes. This didn't bother me too much, as I thought I could fix it by adjusting the mixer levels. I was completely wrong, I started to get worried and google'd answers. One of the responses was to hit the "Windows...
Windows Updates & Activation
Lots of BSOD & Hungup - Lots of Event17 WHEA-Logger
Hello everyone I've been getting this error again and again, and my computer is hungup or BSOD after awail...:mad: Do you know what can I do to fix it? Or what the problem is?? Thank you!! Asrock X58 Supercomputer bios 3.10 i7 920 (bloomfield) @2.67ghz -1.128vol.
BSOD Help and Support
Lots of Windows7 Problems
Hi, I don't really know how to group this, but recently I've been having alot of Windows7 problems. These are some of the ones I've noticed: Can't see changes made to folders until I manually refresh (Ctrl R) Windows Media Player crashes and doesn't load at all 90% of the time Doesn't...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App