Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screens freeze without BSOD, event id 10110 and 6008

01 May 2015   #21
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Do you have a pagefile on the [C] drive, and what size is it ?
A crashdump requires a pagefile on [C].


My System SpecsSystem Spec
.
01 May 2015   #22
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

What is the exact site you are getting your games from?

Do you use any cleaners, tuneup or registry programs?

I noticed you have IOBit Advanced System Care. It can cause more problems that one can count.
My System SpecsSystem Spec
01 May 2015   #23
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please try this:

1. Configure Windows to create (Small Memory Dumps) minidumps:
Dump Files - Configure Windows to Create on BSOD

2. Set the paging file on C: to be the same size as the physically installed RAM:
Virtual Memory Paging File - Change

3. Set the Windows Error Reporting service to MANUAL:
Services - Start or Disable

This image has been resized. Click this bar to view the full image. The original image is sized 715x414 and weights 83KB.

4. Test to see that dump files are created:
- Open Windows Task Manager
- Navigate to the Processes tab
- Right-click on explorer.exe, and click Create Dump File

This image has been resized. Click this bar to view the full image. The original image is sized 800x501 and weights 244KB.

- Note the location of the saved file



- Check that location and confirm that explorer.dmp exists

This image has been resized. Click this bar to view the full image. The original image is sized 767x406 and weights 56KB.
My System SpecsSystem Spec
.

01 May 2015   #24
gregrocker

 

That's a lot of RAM. Did I miss where you tested it with Memtest 6-8 passes or overnight?

Then the other remaining steps in Troubleshooting Steps for Windows 7
My System SpecsSystem Spec
02 May 2015   #25
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Tuckny lets go to a bit of basics and read my ditty and post back what you find

Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT or Vbatt is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
See this for the rail voltage info
http://www.tomshardware.com/reviews/power-supply-specifications-atx-reference,3061.html (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.
My System SpecsSystem Spec
02 May 2015   #26
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

Ok hmmm, I am currently doing ram tests, so far so good, I uninstalled iobit and so far the computer didn't crash. Although I have to say I didn't use it as much as normally.

Here's a screenshot of the program but i'm not too sure what you want me to do.

My System SpecsSystem Spec
02 May 2015   #27
gregrocker

 

Often times when tweaking suites are used on such a featherlight OS that doesn't much tolerate them, the damage is already done even if uninstalled. We see this time and again. So if you don't have a system restore point or image to get before IoBit then I'd strongly consider doing a Clean Reinstall Windows 7 and this time stick with the tools and methods which have proven to work best with Win7.
My System SpecsSystem Spec
03 May 2015   #28
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Often times when tweaking suites are used on such a featherlight OS that doesn't much tolerate them, the damage is already done even if uninstalled. We see this time and again. So if you don't have a system restore point or image to get before IoBit then I'd strongly consider doing a Clean Reinstall Windows 7 and this time stick with the tools and methods which have proven for six years and thousands of installs to work perfectly with Win7.

If you're in doubt of the necessity of this then read over the tutorial to see how much it differs from what you have to know if there's much room for improvement. In cases like this if the hardware checks out, then the install is everything.
Let's say my machine stops crashing, should I still reinstall win7?
My System SpecsSystem Spec
03 May 2015   #29
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

PSU checks out at least that is one less possible issue.

PS Meant o mention as Greg said about Iobits a lot of crap in my own view are there any remnants in the registry?? - HKEYS / LOCAL MACHINE -CURRENT USER > software listings
I see there is a dedicated uninstaller but I don't rely on them myself and always check the HKEYS

IObit Uninstaller, Uninstall Tool, Advanced Uninstaller - IObit
My System SpecsSystem Spec
03 May 2015   #30
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Maybe i missed your answers, but do you have a pagefile on [C] configured as previously suggested ?
My System SpecsSystem Spec
Reply

 Screens freeze without BSOD, event id 10110 and 6008




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Event ID 6008
Every time I shutdown or restart on boot Event Viewer writes an administrative error in the log "Source: EventLog Event ID: 6008 The previous system shutdown at <time> on <date> was unexpected." I do of course shut down properly, i.e... Start> Shutdown or Restart. I've done a good deal of...
BSOD Help and Support
Crash During Games - Event ID 10,41,10110
After a week of trying to figure this out I still am having no luck. I'll get straight to the point. This has been happening 3 months or so after I buildt my computer. -Comp crashed During games and occasionally during general use. -Both my monitors go random solid colors -Custom PC specs ...
BSOD Help and Support
Need help with Net Framework and Event Errors 10110,10111
Hello to all, :D After reading various post related to MS Net Frameworks (NFW) I'm really confused about the numbers that are shown with them. When I did my Win 7 install in Feb. 2012. I remember reading something about NFW 1.1, and know I'm wondering if I should have installed it rather than...
General Discussion
Event Viewer - Event ID 6008 [Troubleshooting]
Hello, First time ever I am posting a thread like this, never thought I would have to. Anyway, the issue is described below. Randomly my computer decides to shutdown and restart unexpectedly.
BSOD Help and Support
Event Error 6008
I get an Event Error 6008 on my desktop that I personally built. When the weather was cooler the computer ran fine. Now that it is summer time (I live in CA and its about 100 outside and 80ish in the house) it shuts down when I'm running high resource stuff such as games and multi-tasking if I...
Hardware & Devices
Event ID 6008 Help.
About a month ago I built a new pc. Everything was running at great temps(no overclock). I use HW Monitor to look at the temps. I ran Memtest86 for about 3-4hrs with no errors and ran Prime95 for about 6-7hrs and never went above 55C on stock cooling(no failures). In the span of two weeks, I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App