Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screens freeze without BSOD, event id 10110 and 6008

03 May 2015   #31
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by DavidE View Post
Maybe i missed your answers, but do you have a pagefile on [C] configured as previously suggested ?
Yes, I went trough what "essenbe" posted, still waiting for the next crash to see if it works.


My System SpecsSystem Spec
.
03 May 2015   #32
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

ok so it crashed again and when I hard reset it gave me a bluescreen and dumped a file in minidump.
My System SpecsSystem Spec
03 May 2015   #33
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

You never did say if you moved the pagefile to [C], but i guess you now have a minidump file.
Back to my popcorn
My System SpecsSystem Spec
.

03 May 2015   #34
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Here's what the dump file says

Code:
BugCheck A, {0, 2, 0, fffff80002e7aea5}
*** WARNING: Unable to verify timestamp for MBfilt64.sys
*** ERROR: Module load completed but symbols could not be loaded for MBfilt64.sys
Probably caused by : MBfilt64.sys ( MBfilt64+1817 )
Followup: MachineOwner
That is your Realtek HiDefinition Audio driver (file labelled as Creative Audio Driver) - Was found in the latest Win8 version available from Realtek on 07Sep2013. Try updating it from your Motherboard's web site ASRock > Z77 Extreme3

Your current driver is

Code:
MBfilt64
start             end                 module name
fffff880`06f80000 fffff880`06f8e000   MBfilt64 T (no symbols)           
    Loaded symbol image file: MBfilt64.sys
    Image path: MBfilt64.sys
    Image name: MBfilt64.sys
    Timestamp:        Thu Jul 30 22:40:32 2009 (4A7267B0)
    CheckSum:         0000FF02
    ImageSize:        0000E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.0
My System SpecsSystem Spec
03 May 2015   #35
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Thanks Obi-Wan for your magic
Can't rep you right now
My System SpecsSystem Spec
03 May 2015   #36
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Don't worry about the Rep. We'll just have to wait and see if that is the whole problem. It's always better, in my opinion, when you have several dumps. It gives you a better grasp of what is happening. Maybe that will work.
My System SpecsSystem Spec
03 May 2015   #37
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

It crashed again but didn't create a minidump file
My System SpecsSystem Spec
03 May 2015   #38
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please check and make sure you are configured for Small Memory Dumps Dump Files - Configure Windows to Create on BSOD

Sometimes a BSOD can cause settings to get changed. Also, make sure you have a Folder named Minidump in C:/Windows

Also Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Also please download and install CPUz CPU-Z | Softwares | CPUID and post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of thwe CPU, Mainboard, Memory and SPD tabs. On the SPD tab, you can select each Dimm Slot. Just post the screenshots of the Dimm slots that have Ram installed in them.
My System SpecsSystem Spec
03 May 2015   #39
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 




My System SpecsSystem Spec
03 May 2015   #40
TuCkNy

Windows 7 Home Premium 64-bit SP1
 
 

Ok so It crashed while I alt-tabbed, still didn't create a dump file, I checked if it was setup to create a dump file and yes it is.
My System SpecsSystem Spec
Reply

 Screens freeze without BSOD, event id 10110 and 6008




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Event ID 6008
Every time I shutdown or restart on boot Event Viewer writes an administrative error in the log "Source: EventLog Event ID: 6008 The previous system shutdown at <time> on <date> was unexpected." I do of course shut down properly, i.e... Start> Shutdown or Restart. I've done a good deal of...
BSOD Help and Support
Crash During Games - Event ID 10,41,10110
After a week of trying to figure this out I still am having no luck. I'll get straight to the point. This has been happening 3 months or so after I buildt my computer. -Comp crashed During games and occasionally during general use. -Both my monitors go random solid colors -Custom PC specs ...
BSOD Help and Support
Need help with Net Framework and Event Errors 10110,10111
Hello to all, :D After reading various post related to MS Net Frameworks (NFW) I'm really confused about the numbers that are shown with them. When I did my Win 7 install in Feb. 2012. I remember reading something about NFW 1.1, and know I'm wondering if I should have installed it rather than...
General Discussion
Event Viewer - Event ID 6008 [Troubleshooting]
Hello, First time ever I am posting a thread like this, never thought I would have to. Anyway, the issue is described below. Randomly my computer decides to shutdown and restart unexpectedly.
BSOD Help and Support
Event Error 6008
I get an Event Error 6008 on my desktop that I personally built. When the weather was cooler the computer ran fine. Now that it is summer time (I live in CA and its about 100 outside and 80ish in the house) it shuts down when I'm running high resource stuff such as games and multi-tasking if I...
Hardware & Devices
Event ID 6008 Help.
About a month ago I built a new pc. Everything was running at great temps(no overclock). I use HW Monitor to look at the temps. I ran Memtest86 for about 3-4hrs with no errors and ran Prime95 for about 6-7hrs and never went above 55C on stock cooling(no failures). In the span of two weeks, I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App