Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After heavy use

21 Apr 2015   #1
Liquid8

windows 7 ultimate x64
 
 
BSOD After heavy use 0x0000001D Bugcode

Hello everyone, since a week i get random bsod.
First my pc was Windows 8, but i prefer 7, so a month ago i installed win7 on it.
Since i got yesterday alot of times bsod, i did a clean setup of windows ( had alot of software crashes to)

Till about a half our ago everything went fine, but then again i've got a bsod.

I was using the following programs on my pc,
* Setup GTAV
*Fifa 15
*Google chrome,
*DS3 Tools for ps3 controller to pc,
*Skype



Here's my uploaded zip.

Also to mention, suddenly in device manager one of my usb controllers can't install any updates

Hope you guys can help me any help is appreciated ;-)


Since i saw in some other posts that msinfo32 could be useful for you to check the problem, i uploaded that to ;-)


My System SpecsSystem Spec
.
21 Apr 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello Liquid8, and welcome to the forums. I will try to help you. I need you to do a couple of things first. Please fill out your system specs with as much detail as possible. Please include the Manufacturer and Model of the components an your PSU and CP{U cooler as well. Hopefully this will help you do that and put them in the correct place.

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

You have only one dump file. My debugger could not read all of the symbols, usually indicating you have a bad third party driver.

Code:
BugCheck 10D, {5, 0, 1202, fffffa800af36610}
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
This is your current driver

Code:
MijXfilt
start             end                 module name
fffff880`06443000 fffff880`06465000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Fri May 11 23:27:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your MotioninJoy simulate Xbox 360 controller (virtual Xinput device) Please try to find an updated driver for it.

Also, please make sure all of your Windows updates are installed and, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Let me know how these things work.
My System SpecsSystem Spec
21 Apr 2015   #3
Liquid8

windows 7 ultimate x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
Hello Liquid8, and welcome to the forums. I will try to help you. I need you to do a couple of things first. Please fill out your system specs with as much detail as possible. Please include the Manufacturer and Model of the components an your PSU and CP{U cooler as well. Hopefully this will help you do that and put them in the correct place.

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

You have only one dump file. My debugger could not read all of the symbols, usually indicating you have a bad third party driver.

Code:
BugCheck 10D, {5, 0, 1202, fffffa800af36610}
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
This is your current driver

Code:
MijXfilt
start             end                 module name
fffff880`06443000 fffff880`06465000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Fri May 11 23:27:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your MotioninJoy simulate Xbox 360 controller (virtual Xinput device) Please try to find an updated driver for it.

Also, please make sure all of your Windows updates are installed and, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Let me know how these things work.
Hi thanks for your answer, I uninstalled the driver and sfc / scannow thing, no integrity violations found.
What kind of dump you need then?
My System SpecsSystem Spec
.

21 Apr 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I don't believe it is a problem with the type of dumps, it is just the drivers used, or perhaps some corrupted drivers. But, just make sure your system is configured for Small Memory Dumps, Dump Files - Configure Windows to Create on BSOD
My System SpecsSystem Spec
21 Apr 2015   #5
Liquid8

windows 7 ultimate x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
I don't believe it is a problem with the type of dumps, it is just the drivers used, or perhaps some corrupted drivers. But, just make sure your system is configured for Small Memory Dumps, Dump Files - Configure Windows to Create on BSOD
Hi, thanks again!
I did what you told me to do, is it possible that my computer is now way faster? Because it seems like it is..

Till now no more BSOD happend
I think the best is to keep this topic up for 1/2 days then no BSOD it's solved.


Thanks anyway
My System SpecsSystem Spec
21 Apr 2015   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

No problem. I wouldn't think it would make your computer faster, but it's possible. Just keep us posted on your progress.
My System SpecsSystem Spec
Reply

 BSOD After heavy use




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD during heavy gaming
I get Random BSOD when i play games like Far Cry 4, H1Z1(Alpha so might be game bugs), Arma 3. They can occour from anything between 5 min into playing and 8 hours into playing. It doesn't happend when on standby or low use activities like web-browsing or watching youtube/netflix. I suspect it...
BSOD Help and Support
BSOD during heavy use
I recently built a computer, and it was doing okay for a few days. It just started crashing a lot while playing video games (screen freezes and it makes a loud noise - particularly GW2, which I'm told is more CPU heavy). It also blue screens sometimes. After exiting out of a GPU benchmark program...
BSOD Help and Support
BSOD doing anything heavy, error 0x7e
Hello, since recently my computer started giving me BSODs, it usually occurs when im doing anything cpu heavy things (games, repairing rar files ect.) i really hope any of the experts here can fix it. 64 bits clean harddrive, w7 first os that's o nthere retail hardware is about 1 year 6...
BSOD Help and Support
BSOD under heavy load
Hello, This is my first post here, so I hope I'm doing it right. I read the instructions, so here we go. I have a Lenovo B570 laptop and I am experiencing BSODs it seems when the laptop is under heavy load, a lot of windows open due to my work, graphic editing software, skype etc. I tried...
BSOD Help and Support
Help, I'm taking heavy fire from BSOD's
As thread name says, I'm under heavy fire from BSOD's. The error messages appear to be random, as they change around a lot. I installed the OS about 1 month ago, and things have been bad ever since. I am running Windows 7 professional, x64, retailed version. These are my system specs: ...
BSOD Help and Support
BSoD during heavy system load
Is Windows 7 . . . - x86 (32-bit) or x64 ? x64 - the original installed OS on the system? Win 7 - an OEM or full retail version? OEM - What is the age of system (hardware)? 2 months old (parts bought separately) - What is the age of OS installation (have you re-installed the OS?)
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App