Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD critcal object termination and others

24 Apr 2015   #11
Neyoh

Windows 7 Home 64Bits
 
 

I check physical connection and i run sfc /scannow command, no problem.

But for 2 days i haven't had bsod. Seatools would have solved the problem ?


My System SpecsSystem Spec
.
24 Apr 2015   #12
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I don't know whether Seatools fixes drive issues, I only recommend it for diagnostic purposes. It's sounds good that you're not getting any more BSODs, monitor the system for a few days and let us know how you get on.
My System SpecsSystem Spec
24 Apr 2015   #13
Neyoh

Windows 7 Home 64Bits
 
 

I said nothing, i just crashed but during this one, i wasn't at PC.
Totally random
My System SpecsSystem Spec
.

24 Apr 2015   #14
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I'll take a look later tonight, I'm at work at the moment.
My System SpecsSystem Spec
24 Apr 2015   #15
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

The dump is still blaming a problem with the SSD/HDD. Can you plug your SSD into another SATA port on your motherboard and test the system.
Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc400087c8, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc00000c0, error status (normally i/o status code)
Arg3: 0000000039be7860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff880010f9880, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc00000c0 - This device does not exist.
My System SpecsSystem Spec
24 Apr 2015   #16
Neyoh

Windows 7 Home 64Bits
 
 

Yes, i did it(switch sata port and switch cable) but 10min after i also crashed, no bsod but screen freeze.
Maybe SSD's power is unstable ?

ps: i join again dump rar.
My System SpecsSystem Spec
03 May 2015   #17
Neyoh

Windows 7 Home 64Bits
 
 

I crashed 3 times today again ....
I give you new dump rar.
My System SpecsSystem Spec
Reply

 Random BSOD critcal object termination and others




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Critical Object Termination
For the past few days I've been getting BSODs around 3-4 times a day periodically. At times it would happen back to back or after a few hours at a time. I've included the attachments as instructed. I'm stumped at what I can do and have little to no experience with this kind of thing.
BSOD Help and Support
Random BSOD critcal object termination and kernel data inpage error
Hello, Every times randomly, i have a BSOD critical_object_termination same with new installation of windows. I solved problem with a downgrade and new update Nvidia drivers but today my problem of BSOD restart. :cry: I uploaded the SF diagnostic tool file but Whocrashed said : On Tue...
BSOD Help and Support
Random BSOD,CRITICAL OBJECT TERMINATION ERROR0f4, hal.dll ntoskrnl.exe
I've been getting random BSODs for awhile now, it happens randomly once every couple of days, either when I start my computer or when i'm just using it for daily uses. All my drivers should be all up to date as windows didn't detect anything when I tried to check for updates
BSOD Help and Support
BSOD Critical Object Termination F4
I tried using the SF diag tool and it kept giving me errors. I ran as administrator, changed the compatability mode and disabled symantec. Any advice on the dumps that i attached in the zip would be helpful. Its a Dell E6400, with a new M4 SSD (256 gb). Win 7 Pro SP1, 2.4ghz Core2 Duo, 2X2gb...
BSOD Help and Support
BSOD critical object termination
I don't know what had happened to my computer but it just had BSOD suddenly 021312-15085-01.dmp here is the dmp file and i wish someone can help me with this, im about to explode ps: i just installed drop box 30min ago before the bsod happened during restart
BSOD Help and Support
BSOD F4 Critical Object Termination
Need help solving this problem. Machine occasionally crashes w BSOD at start of day. After reboot (sometimes needing to boot in "safe" mode) machine works fine the rest of day. Can't seem to find a pattern. I have uploaded the perfmon and BSOD Files Gateway SX 2850 Windows 7 Home Premium...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App