Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD critcal object termination and others

21 Apr 2015   #1
Neyoh

Windows 7 Home 64Bits
 
 
Random BSOD critcal object termination and others

Hi,

Since 1 years i have lot of BSOD and i don't find the cause of his problems.
I tested :
- check RAM memory86+ 8 pass 0 error.
- check disk with chckdsk /f : no problem
- check all drivers.
- temperature of CPU and GPU are OK.


My bsod are very random every 10min or 5days, on average 4 per day. In-game or not.
But sometimes, this occurs when i connect a USB Key it's strange ... or my computer just freezing with no bsod.
Yesterday, i played 2hours on GTA V and i haven't no bsod.

Finally, I hope you can help me. Thanks
Neyoh


My System SpecsSystem Spec
.
21 Apr 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Both of your dumps are giving this.
Code:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa80074e9060, Terminating object
Arg3: fffffa80074e9340, Process image file name
Arg4: fffff80003385940, Explanatory message (ascii)

Debugging Details:
------------------

----- ETW minidump data unavailable-----

PROCESS_OBJECT: fffffa80074e9060

IMAGE_NAME:  csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

BUGCHECK_STR:  0xF4_IOERR
I know you say you've run CHKDSK but can you run it again, and also run Seatools (you do have an HDD not an SSD yes?)

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Run chkdsk. Disk Check

Post back with the results and we'll go from there.
My System SpecsSystem Spec
21 Apr 2015   #3
Neyoh

Windows 7 Home 64Bits
 
 

Tomorrow, i will test with this tool.
But i have SSD (SanDisk ultra plus 128go) for this system and HDD (seagate barracuda 1to) for data/game ...ect
I can launch test "long repair" on my HDD seagate it's good ? Maybe it's my HDD witch do crash windows ? And this test can delete data on my HDD ?

edit : I have an others blue screen KERNEL_DATA_INPAGE_ERROR, i join new zip file into this post
My System SpecsSystem Spec
.

22 Apr 2015   #4
Neyoh

Windows 7 Home 64Bits
 
 

I tested SeaTools on my HDD and SSD, no problem.

I just checked SSD with chckdsk, it's all good.
My System SpecsSystem Spec
22 Apr 2015   #5
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Download the SanDisk Toolbox for your SSD from here to check your SSD.
My System SpecsSystem Spec
22 Apr 2015   #6
Neyoh

Windows 7 Home 64Bits
 
 

I checked my SDD with this tool, it's OK.
My System SpecsSystem Spec
22 Apr 2015   #7
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Can you check all the physical SATA connections between your drives and the motherboard please.
My System SpecsSystem Spec
22 Apr 2015   #8
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Of your last three dumps two were the same as quoted previously but there is also a 0x7A which states:
Code:
ERROR_CODE: (NTSTATUS) 0xc00000c0 - This device does not exist.

BUGCHECK_STR:  0x7a_c00000c0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  firefox.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
Open an elevated command prompt and type in or copy and paste sfc /scannow and hit enter.
My System SpecsSystem Spec
23 Apr 2015   #9
Neyoh

Windows 7 Home 64Bits
 
 

Quote   Quote: Originally Posted by Boozad View Post
Can you check all the physical SATA connections between your drives and the motherboard please.
I'm not at home.
But reflecting, on my motherboard i believe that my 2 drive SSD & HDD are connected on SATA II port instead of SATA 3.0.
Do you think this can be the cause of my problem ?

Quote   Quote: Originally Posted by Boozad View Post
Of your last three dumps two were the same as quoted previously but there is also a 0x7A which states:
Code:
ERROR_CODE: (NTSTATUS) 0xc00000c0 - This device does not exist.

BUGCHECK_STR:  0x7a_c00000c0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  firefox.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
Open an elevated command prompt and type in or copy and paste sfc /scannow and hit enter.
Tonight, i will test this and check physical SATA connections.

Thank you very much for your help, i'll keep you in the loop.
My System SpecsSystem Spec
23 Apr 2015   #10
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Quote   Quote: Originally Posted by Neyoh View Post
I'm not at home.
But reflecting, on my motherboard i believe that my 2 drive SSD & HDD are connected on SATA II port instead of SATA 3.0.
Do you think this can be the cause of my problem ?
I doubt it, the drives will be backwards compatible, they'll just have slower transfer rates than they're capable of as it's governed by the controller. The only way the SATA II ports can cause problems is if they're going bad (which is still a possibility).

Quote   Quote: Originally Posted by Boozad View Post
Tonight, i will test this and check physical SATA connections.

Thank you very much for your help, i'll keep you in the loop.
You're welcome, keep us informed of how things go.
My System SpecsSystem Spec
Reply

 Random BSOD critcal object termination and others




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Critical Object Termination
For the past few days I've been getting BSODs around 3-4 times a day periodically. At times it would happen back to back or after a few hours at a time. I've included the attachments as instructed. I'm stumped at what I can do and have little to no experience with this kind of thing.
BSOD Help and Support
Random BSOD critcal object termination and kernel data inpage error
Hello, Every times randomly, i have a BSOD critical_object_termination same with new installation of windows. I solved problem with a downgrade and new update Nvidia drivers but today my problem of BSOD restart. :cry: I uploaded the SF diagnostic tool file but Whocrashed said : On Tue...
BSOD Help and Support
Random BSOD,CRITICAL OBJECT TERMINATION ERROR0f4, hal.dll ntoskrnl.exe
I've been getting random BSODs for awhile now, it happens randomly once every couple of days, either when I start my computer or when i'm just using it for daily uses. All my drivers should be all up to date as windows didn't detect anything when I tried to check for updates
BSOD Help and Support
BSOD Critical Object Termination F4
I tried using the SF diag tool and it kept giving me errors. I ran as administrator, changed the compatability mode and disabled symantec. Any advice on the dumps that i attached in the zip would be helpful. Its a Dell E6400, with a new M4 SSD (256 gb). Win 7 Pro SP1, 2.4ghz Core2 Duo, 2X2gb...
BSOD Help and Support
BSOD critical object termination
I don't know what had happened to my computer but it just had BSOD suddenly 021312-15085-01.dmp here is the dmp file and i wish someone can help me with this, im about to explode ps: i just installed drop box 30min ago before the bsod happened during restart
BSOD Help and Support
BSOD F4 Critical Object Termination
Need help solving this problem. Machine occasionally crashes w BSOD at start of day. After reboot (sometimes needing to boot in "safe" mode) machine works fine the rest of day. Can't seem to find a pattern. I have uploaded the perfmon and BSOD Files Gateway SX 2850 Windows 7 Home Premium...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App