Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after "Starting Windows" screen

23 Apr 2015   #1
shanks1

 
 
BSOD after "Starting Windows" screen

I just built the PC though some parts were old.

*** STOP: 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)


My System SpecsSystem Spec
.
23 Apr 2015   #2
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Please complete this tutorial. It's required in this thread.

Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
23 Apr 2015   #3
shanks1

 
 

I'm not sure how because I can't access the desktop.
My System SpecsSystem Spec
.

24 Apr 2015   #4
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

If I understand you correctly this Tutorial by gregrocker give a lot of things to do.
Read it slowly and carefully.

Troubleshooting Windows 7 Failure to Boot
My System SpecsSystem Spec
24 Apr 2015   #5
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Shanks1, if it will help, a stop code 7B is usually an inaccessible Boot Device. Go to BIOS and check your boot menu and make sure your Hard Drive can be 'seen' by BIOS. If it cannot be seen, check your connections on both ends of the cable. If it can be seen, you may want to run Startup Repair Startup Repair, which is part of what Layback Bear suggested. The link he gave is about all that can be done when a system just won't boot.

Did you do a clean install when you built the computer? If you didn't, that is most likely your problem. You will need to do one, Clean Install Windows 7.
My System SpecsSystem Spec
24 Apr 2015   #6
shanks1

 
 

Clean install fixed it. Thank you.
My System SpecsSystem Spec
24 Apr 2015   #7
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Great, glad it worked for you. So, you had not done one when you built the computer? When you are sure the problem is resolved, please mark the thread solved.
My System SpecsSystem Spec
Reply

 BSOD after "Starting Windows" screen




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD during the "starting windows" screen
Hello, There are 3 options in the BIOS of my MB for sATA modes : IDE, AHCI and RAID. I made a fresh install of 7 pro x64 on a SSD drive but for some reason the sATA mode was set to "RAID" rather than "AHCI" at that time... Now, I followed the tutorial and changed msahci/start from 3 to 0....
BSOD Help and Support
BSOD after "Starting Windows" screen, receive STOP: 0x
I didn't think the list of errors I got would fit the title. I also figure that posting a log isn't possible because I can't properly boot into windows. Anyways, a bit of backstory. For the past few days my PC has been behaving oddly. It would take much longer than usual to begin booting, usually...
BSOD Help and Support
Frequent BSOD and missing "Starting Windows" screen
Hi, I've been getting a few BSODs recently with the error "PAGE_FAULT_IN_NONPAGED_AREA", and I have also noticed that when I start my computer, nothing shows up until the login screen shows so I can't boot in safe mode. I don't know what to do-please help! -Rixterz
BSOD Help and Support
BSOD right after "Starting Windows" screen goes away
Hello All, unfortunately, I'm back again with more problems. Few weeks ago I ran into some internet problems when I'm not sure are related or not. But that went away and then my compute would freeze and I would have to reboot. After I noticed what was happening I just new BSOD was next. Yesterday...
BSOD Help and Support
BSOD after "Starting windows" screen....
BSOD after "Starting windows" screen.... report is attached.... any help wud be appreciated... :)
BSOD Help and Support
BSOD after "starting windows" startup screen
My system has continually played up since I bought it about 5 weeks ago. My very first power up gave me three blue screen crashes with a "cpu fan error" and 2 beeps on POST. The system was bought overclocked (from 3.2 to 4 GHz) and I assumed this was the problem but during most of these...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App