BSOD Unmountable_Boot_Volume 0x000000ED

Page 1 of 2 12 LastLast

  1. Posts : 11
    Windows 7 32 bit
       #1

    BSOD Unmountable_Boot_Volume 0x000000ED


    Hi everyone.

    After turning off my PC without wanting it, I had the bad surprise to get a BSOD when rebooting.

    What I know about it so far :
    - Safe Mode doesn't work
    - Type error UNMOUNTABLE_BOOT_VOLUME
    - STOP : 0x000000ED (0x86BE9235, 0xC0000185, 0x00000000, 0x00000000)
    - When I try to use the Windows 7 recovery tool, I get to the loading Windows logo, then All I have is a black screen with a white cursor that I can move, but nothing else, and it doesn't change even after hours of waiting (like it's in some kind of loop)
    - I already tried to use a USB key with a bootable Windows 7 on it, but I just get the same thing as before (black screen with the cursor)

    I tried to take a look at what people already did to solve this problem, but I can't even get to a point where I can run the CHKDSK C: r/ so far...

    I can't, for instance, use this tutorial :
    Troubleshooting Windows 7 Failure to Boot

    Should I try to run SeaTools in my case in DOS mode ? I tried to check if it was compatible for me (AHCI, IDE, SATA config problem) except I'm running on a HP Pavilion dv5 and this option is not available in DOS..

    All in all, I'm kinda lost after hours of trials, could you guys help me with this ?

    Thank you in advance.
      My Computer


  2. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #2

    Yes if you can, run SeaTools in DOS mode. It certainly sounds like your hard drive is dead. Follow SeaTools for DOS and Windows - How to Use if you need any instructions.
      My Computer


  3. Posts : 11
    Windows 7 32 bit
    Thread Starter
       #3

    Hi.

    Unfortunately, I got no results from it.

    The short test was aborted saying that I should try the long test, Long test gave me nothing either... the test result was "Failed", but I had no error code and I can't try to repair anything...

    EDIT : I couldn't repair because it's not a seagate Drive. Errors are
    [541612399]
    [541612400]
    [541612401]
    [541612402]
    [541612403]
    [541612404]
    [541612405]

    Don't know if this helps...
    Last edited by Uneo; 26 Apr 2015 at 16:01.
      My Computer


  4. Posts : 11
    Windows 7 Ultimate x64
       #4

    I have the same issue! I just submitted a post about it before even seeing this one, but when I try to boot into recovery, I only get the black screen, no cursor. Good luck!
      My Computer


  5. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #5

    Uneo said:
    Hi.

    Unfortunately, I got no results from it.

    The short test was aborted saying that I should try the long test, Long test gave me nothing either... the test result was "Failed", but I had no error code and I can't try to repair anything...

    EDIT : I couldn't repair because it's not a seagate Drive. Errors are
    [541612399]
    [541612400]
    [541612401]
    [541612402]
    [541612403]
    [541612404]
    [541612405]

    Don't know if this helps...
    Time to buy a new hard drive unfortunately.
      My Computer


  6. Posts : 11
    Windows 7 32 bit
    Thread Starter
       #6

    Thanks for the answer.

    The hard drive is dead, ok but can I still recover the data on it ? Is it just a logical failure or some mechanical problem ? Is there a way I can recover the files myself ?

    Thanks.
      My Computer


  7. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #7

    When you have Windows up and running on a new drive try plugging the drive in and see if Windows sees it then. If not there may be other ways, report back when you're done and we'll go from there.
      My Computer


  8. Posts : 11
    Windows 7 32 bit
    Thread Starter
       #8

    IS it possible that Seatools in DOS Mode couldn't repair just because I don't have a Seagate DD, just like in this thread BSOD While Booting Into the OS - 0x000000ED ?

    What if I find the brand of my hard drive, Maybe I can actually repair it the same way ?
      My Computer


  9. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #9

    You can certainly give it a try. Once a hard drive is going that bad though I wouldn't recommend carrying on using it as you're just delaying the inevitable.
      My Computer


  10. Posts : 11
    Windows 7 32 bit
    Thread Starter
       #10

    Ok, I should be ready to go by tomorrow night, I have a new external hard Drive I bought just to store the data from my old HDD and I'll take a PC from a friend of mine to do it.

    What are the next steps ?

    Thank you in advance.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:42.
Find Us