BSOD Driver power state failure

Page 1 of 2 12 LastLast

  1. Posts : 9
    Windows 7 Pro 64bit
       #1

    BSOD Driver power state failure


    Hello,

    I have some recent issues with BSOD after start up. After that my laptop just reboots and works fine for the remainder of the day. I recently did a complete clean install of windows 7, because before that I also had some issues with BSOD. See attached the zipfile,

    best regards

    Peter
      My Computer


  2. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #2

    Your logs are incomplete, important files are missing that we need to analyze your issue/s. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.
      My Computer


  3. Posts : 9
    Windows 7 Pro 64bit
    Thread Starter
       #3

    I just collected all drivers from website of Intel, Asus and Nvidia to update everything
      My Computer


  4. Posts : 9
    Windows 7 Pro 64bit
    Thread Starter
       #4

    mm ok, I tried it again.
      My Computer


  5. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #5

    The logs still hardly have any files in, and there are no dump files at all.

    1. Open Advanced System Settings
    2. Click on Settings in Startup & Recovery
    3. Make sure both boxes indicated below are checked
    4. In the dropdown box ensure you're set to record Small Memory Dumps

      My Computer


  6. Posts : 9
    Windows 7 Pro 64bit
    Thread Starter
       #6

    My system made a very large minidump file about 400mb, I changed the settings. I now just have to reproduce the problem and I will upload try and run the tool again
      My Computer


  7. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #7

    It sounds like you were set to record Kernel memory dumps.
      My Computer


  8. Posts : 9
    Windows 7 Pro 64bit
    Thread Starter
       #8

    Ok I ran the tool again, now the dumpfile is included
      My Computer


  9. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #9

    Your msinfo32 and systeminfo files are still missing from the logs, these files contain important information that is needed to analyse the problem. Please re-run the tool until it has completely finished and upload the new unedited logs.
      My Computer


  10. Posts : 9
    Windows 7 Pro 64bit
    Thread Starter
       #10

    Well it is strange, because the tool says it is compeletly finished I do nothing. Then a zipfile is copied to my desktop. But still with the same files. I have now manually added msinfo32 and sysinfo. Hopefully this will work then..
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:45.
Find Us