Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD KERNAL_DATA_PAGE_ERROR since today, error 0x0000007A

14 May 2015   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, TtomtomT, what I am getting is the same error.

Code:
 
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc40045e70, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 00000001ac038be0, current process (virtual address for lock type 3, or PTE)
Arg4: fffff88008bce000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
 
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.
DISK_HARDWARE_ERROR: There was error with disk hardware
You may try changing Sata Cables and trying a different port.


My System SpecsSystem Spec
.
14 May 2015   #12
TtomtomT

Windows 7 Home Premium x64
 
 

Thank you for the tip, I'm going to do that and report any BSOD's. If I don't get any this weekend I will give you a reply.
My System SpecsSystem Spec
14 May 2015   #13
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Thanks, please do either way. Also, if you are overclocking anything, please set everything to default levels. I'm not opposed to overclocking, in fact I'm rather notorious here about it and am overclocked right now. But, when dealing with an unstable system, it makes debugging it almost impossible.

I would also suggest using the most current Precision X and monitoring temps, and ram usage while playing games. I monitor core frequency, temps, fan speed and ram usage. There is the possibility of you running out of Vram with GTA. I don't play GTA but it seems a lot of people are having problems with it.
My System SpecsSystem Spec
.

14 May 2015   #14
TtomtomT

Windows 7 Home Premium x64
 
 

I have tried over clocking but set everything back because of errors. I have checked my ram and temperatures a lot already with GTA. I am sure that I don't have enough vram maybe because that it uses HDD space (does it? Or just ram? Ram is never full btw) the error occurs.
My System SpecsSystem Spec
14 May 2015   #15
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I honestly don't know if it uses hard drive space if it runs out of ram, but I would assume it does or uses system ram. But I do know that every time you change maps it is continually reading from the hard drive and writing to it. If you don't have any problems with any other games, it is very possible it could be the game itself. I have had a few games like that. It is a sad fact that many of the games are poorly coded, thus the reason for all the patches and updates we get these days. I have had some games I just uninstalled because of that.
My System SpecsSystem Spec
16 May 2015   #16
TtomtomT

Windows 7 Home Premium x64
 
 

I switched the SATA Cable and port of the HDD with GTA on it, so not windows, with the one of the disk driver I never use. Problem still occuring, but even when I tried to close notepad yesterday. Should I switch the cable of the SSD too?
My System SpecsSystem Spec
16 May 2015   #17
GokAy

Windows 7 Ultimate x64 SP1
 
 

This BSOD stuff I have very little knowledge about, I don't want to interfere but:

- If this is mostly connected to GTA V it may very well be you are getting out of RAM
- I used to get BSOD/crashes when I didn't have a pagefile assigned.
- Check what kind of pagefile is setup, adjust it to, say, 10GB fixed and see what happens.

Just some ideas, hope you get your problems sorted.
My System SpecsSystem Spec
16 May 2015   #18
TtomtomT

Windows 7 Home Premium x64
 
 

Thank you for your reply.

Pagefile was set to system control. It's on 12252 now (recommended), but my SSD? with windows on it AND my HDD have a pagefile it says..is that normal? Shouldn't it only be on the SSD? It's not the HDD with GTA btw.
My System SpecsSystem Spec
16 May 2015   #19
GokAy

Windows 7 Ultimate x64 SP1
 
 

You can have a pagefile on any drive. A pagefile on SSD causes too much writes though so I reduced SSD pagefile to 600MB (enough to make a kernel dump, otherwise you get volmgr errors in event viewer) and HDD pagefile to 10GB. Ask in the Hardware section before changing this and see what others say about it.
My System SpecsSystem Spec
16 May 2015   #20
TtomtomT

Windows 7 Home Premium x64
 
 

But yeah, I keep an eye on my ram a lot when playing the game and it isn't the problem as far as I know, so also the pagefile shouldn't be a problem.
My System SpecsSystem Spec
Reply

 BSOD KERNAL_DATA_PAGE_ERROR since today, error 0x0000007A




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while out - Error: 0x0000007a
Hi all and welcome to my first post. Having never received a blue screen (officially known as stop errors) before on my current machine, I came back to my computer after being out and discovered an stop error had occurred. The error/bug check code is 0x0000007a (kernal data inpage error). ...
BSOD Help and Support
BSOD while doing anything, error 0x0000007a
I have been blue screening on my computer for roughly a month, not seriously messing anything up, but the first time it happened my HDD couldn't be loaded, but after that I thought the worst had passed, but it had kept coming over and over again, just annoying me now, but I don't want it to get...
BSOD Help and Support
BSOD error 0X0000007A
Hello, I just got my first BSOD today. And now it happens every hour or so. I'm not sure what to do. I have all the necessary files attached, I believe. Thank you for any help you can give.
BSOD Help and Support
KSOD error before Login Screen then BSOD, error 0x0000007A
Hi 2 days ago I turned my computer on and I was logging in as normal. It finished doing the 'starting windows sequence' and then the screen turned black, with a cursor. I waited then the BSOD came up. ALSO the KSOD comes up in the Safe Mode as well.I spam f8 and I have tried everything.The most...
BSOD Help and Support
Occasional BSOD, last error was 0x0000007A
I have been experiencing BSOD occasionally since I bought my laptop just over a year ago. I have tried a few things (updates, disk check, memory diagnosis) but the problem persists. There doesn't appear to be any obvious reason why it crashes, sometimes it happens when I'm playing a video or music...
BSOD Help and Support
BSOD doing nothing, error 0x0000007A
I was just dozing off since it was late and when i woke up to turn off my rig it gave me this BSOD. I googled the problem and most says its caused by bad sectors. One of my HDD monitoring software says it has 1 bad sector. I've run memtest before for 16 hours+ and it gave me no error so it's...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App