Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD everytime at startup

13 May 2015   #1
bsoderrorrip

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD everytime at startup

BSOD usually happened once a day, but now it happens at startup and its getting worse. I noticed that I dont get the BSOD if Im running on safe mode. I have attached my dump files.

OS: Windows 7 Ultimate x64

Please help me. This is driving me crazy.


My System SpecsSystem Spec
.
13 May 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, bsoderrorrip. I will try to help you.

All of your recent dump files were similar

Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffffa800ce27cf0, fffffa800ce27d50, 4060005}
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferList+86 )
Followup: MachineOwner
mwac is Malwarebytes Web Access Control
NETIO is the Microsoft Network I/O controller Note that both of those are network related

Code:
 
BugCheck 19, {20, fffffa800d883f60, fffffa800d883f80, 4020006}
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )
Followup: MachineOwner
fwpclient is the Windows Firewall Platform kernel-mode client

Please boot into Safe Mode with Command Prompt and open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

see if you have internet access, if you don't boot into Safe Mode with Networking. If you have internet access please run these

Scan with Kaspersky TDSSKiller:
http://support.kaspersky.com/viruses...on/5350#block1
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET
Please download and install superantispyware if you can SUPERAntiSpyware | Remove Malware | Remove Spyware - AntiMalware, AntiSpyware, AntiAdware! and run a full scan also try with Malwarebytes.

I am not sure if you can in safe mode, but please find your computer model on the HP site and download the LAN driver and wireless driver, if you have it and install them.

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs


Is there some reason you do not have SP1 installed? You will need it installed and all Windows Updates run and successfully installed. Did you install any new hardware or software just before this started?
My System SpecsSystem Spec
14 May 2015   #3
bsoderrorrip

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ive got an updated dump file even tho I updated land driver. I also enabled windows update and got sp1.

I did the sf scan now and there were no problems with integrity. I also ran chkmod.

Here is my system specs:
CPU
(1) Intel(R) Xeon(R) CPU E5430 @ 2.66GHz (2) Intel(R) Xeon(R) CPU E5430 @ 2.66GHz

Motherboard:
Hewlett-Packard 0A9Ch

BIOS:
Default System BIOS

Total Memory: 16GB
Usable Memory: 16GB

HDD: WDC WD5000AAKS-75A7B2 ATA Device

Graphics Card: NVIDIA GeForce GTX 650

OS: Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1

I have also updated my profile system specs.

I did update my malwares antibytes software this past last week.


After changing my lan driver, I stopped getting blue screen at startup. Now I receive the blue screen randomly throughout gaming/browsing.
My System SpecsSystem Spec
.

15 May 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Did you do the online virus scans I suggested? The dump files are pretty much the same

Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffffa800e7d2800, fffffa800e7d2820, 402000c}
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )
mwac is Malwarebytes web access control. Please uninstall Malwarebytes and see if your problem gets better. Also, run the virus scans I recommended.
My System SpecsSystem Spec
Reply

 BSOD everytime at startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on startup. Everytime, works only in safe mode
Hey Guys, I keep getting random BSOD's. Would someone be so kind to check my dump file? BCCode: 1e BCP1: FFFFFFFF80000003 BCP2: FFFFF800030CDA38 BCP3: 0000000000000002 BCP4: 0000000000000000 OS Version: 6_1_7601
BSOD Help and Support
BSOD once, now BSOD everytime on startup when it gets to desktop.
Hello all, thanks in advance. I haven't had BSOD problems anytime recently with this computer (Previously had issues with some drivers but I've replaced hardware and drivers long ago and no longer had issues). Tonight I was playing Wildstar and I got a BSOD for my ATI drivers (Which I'd had...
BSOD Help and Support
BSOD on cold startup everytime; 0x124_4 error
Hi, I have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other...
BSOD Help and Support
BSOD at startup everytime.
Day before yesterday did a virus scan and system all good. Yesterday morning did a windows update and installed 3 updates and a fourth failed to install. Before I got a chance to see which one it was I get a BSOD Bad_Pool_Header. System restarted but I had to go to work so I left. Gf...
BSOD Help and Support
Everytime system recovery pops up at startup
If i bootup my laptop(i'm now using an old desktop) Everytime system recovery pops up. I can't turn it out. Even how hard i try! Please someone help me! I'm using Windows 7 64 bits (dutch version(don't know if that matters))
General Discussion
BSOD Windows 7 Ultimate on startup, everytime
Hi there I am getting a BSOD everytime I start my DELL Laptop VOSTRO 1520. The laptop is around 12 months old, and been stable over the last 6 months so this is random. The BSOD happens every time and I can't get my laptop running. I run WINDOWS 7 ULTIMATE. The BSOD is generally x7e or...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App