Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD

17 May 2015   #1
Spikers

Michigan
 
 
Random BSOD

I got the BSOD just now as I went to put my computer into sleep mode..


My System SpecsSystem Spec
.
17 May 2015   #2
americancritic

Windows 7 Home Premium 64-Bit SP1
 
 

Hell spikers and welcome to the sevens forum. please follow the instructions in this tutorial and a BSOD expert will look at your problem and then help.

Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
17 May 2015   #3
Spikers

Michigan
 
 

Here is is.
My System SpecsSystem Spec
.

17 May 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, Spikers. as stated before, Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

You have been getting BSODs since July of 2014 on a fairly regular basis.


Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck C2, {7, 109b, 0, fffffa800c0e8c20}
*** WARNING: Unable to verify timestamp for TsLwWfF.sys
*** ERROR: Module load completed but symbols could not be loaded for TsLwWfF.sys
GetPointerFromAddress: unable to read from fffff80002f17100
GetUlongFromAddress: unable to read from fffff80002f171c0
Probably caused by : TsLwWfF.sys ( TsLwWfF+1817 )
That is your CommView WiFi Capture Driver. your current driver is Y

Code:
TsLwWfF
start             end                 module name
fffff880`02e16000 fffff880`02e21000   TsLwWfF  T (no symbols)           
    Loaded symbol image file: TsLwWfF.sys
    Image path: TsLwWfF.sys
    Image name: TsLwWfF.sys
    Timestamp:        Wed May 11 17:25:43 2011 (4DCB0CE7)
    CheckSum:         000120AC
    ImageSize:        0000B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
 
fffff880`0d53aad8  fffff880`0d620042Unable to load image bcmwlhigh664.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bcmwlhigh664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwlhigh664.sys
 bcmwlhigh664+0x20042
Which is your Broadcom 802.11 USB Network Adapter Driver. Your current version is

Code:
 
 bcmwlhigh664
start             end                 module name
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664 T (no symbols)           
    Loaded symbol image file: bcmwlhigh664.sys
    Image path: bcmwlhigh664.sys
    Image name: bcmwlhigh664.sys
    Timestamp:        Mon Mar 02 02:48:58 2015 (54F423FA)
    CheckSum:         001358D9
    ImageSize:        00137000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04
Unloaded modules:
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
fffff880`0d646000 fffff880`0d77d000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
That marked in red is unusual.

Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck A, {0, 2, 1, fffff80002c9a2bc}
*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )
Which is your Netgear Neutral Wireless Solution and was shown in several dumps. The version you have installed is

Code:
 scmndisp
start             end                 module name
fffff880`019c2000 fffff880`019cc000   scmndisp T (no symbols)           
    Loaded symbol image file: scmndisp.sys
    Image path: scmndisp.sys
    Image name: scmndisp.sys
    Timestamp:        Fri May 27 05:30:22 2011 (4DDF7D3E)
    CheckSum:         00009C0C
    ImageSize:        0000A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
What do you use the Tamos Wireless analyzer for?

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please update these drivers and upload the requested files so we may be of more help.
My System SpecsSystem Spec
17 May 2015   #5
Spikers

Michigan
 
 

Quote   Quote: Originally Posted by essenbe View Post
Hello, Spikers. as stated before, Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

You have been getting BSODs since July of 2014 on a fairly regular basis.


Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck C2, {7, 109b, 0, fffffa800c0e8c20}
*** WARNING: Unable to verify timestamp for TsLwWfF.sys
*** ERROR: Module load completed but symbols could not be loaded for TsLwWfF.sys
GetPointerFromAddress: unable to read from fffff80002f17100
GetUlongFromAddress: unable to read from fffff80002f171c0
Probably caused by : TsLwWfF.sys ( TsLwWfF+1817 )
That is your CommView WiFi Capture Driver. your current driver is Y

Code:
TsLwWfF
start             end                 module name
fffff880`02e16000 fffff880`02e21000   TsLwWfF  T (no symbols)           
    Loaded symbol image file: TsLwWfF.sys
    Image path: TsLwWfF.sys
    Image name: TsLwWfF.sys
    Timestamp:        Wed May 11 17:25:43 2011 (4DCB0CE7)
    CheckSum:         000120AC
    ImageSize:        0000B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
 
fffff880`0d53aad8  fffff880`0d620042Unable to load image bcmwlhigh664.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bcmwlhigh664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwlhigh664.sys
 bcmwlhigh664+0x20042
Which is your Broadcom 802.11 USB Network Adapter Driver. Your current version is

Code:
 
 bcmwlhigh664
start             end                 module name
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664 T (no symbols)           
    Loaded symbol image file: bcmwlhigh664.sys
    Image path: bcmwlhigh664.sys
    Image name: bcmwlhigh664.sys
    Timestamp:        Mon Mar 02 02:48:58 2015 (54F423FA)
    CheckSum:         001358D9
    ImageSize:        00137000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04
Unloaded modules:
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
fffff880`0d600000 fffff880`0d737000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
fffff880`0d646000 fffff880`0d77d000   bcmwlhigh664
    Timestamp: unavailable (00000000)
    Checksum:  00000000
    ImageSize:  00137000
That marked in red is unusual.

Code:
 
Use !analyze -v to get detailed debugging information.
BugCheck A, {0, 2, 1, fffff80002c9a2bc}
*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )
Which is your Netgear Neutral Wireless Solution and was shown in several dumps. The version you have installed is

Code:
 scmndisp
start             end                 module name
fffff880`019c2000 fffff880`019cc000   scmndisp T (no symbols)           
    Loaded symbol image file: scmndisp.sys
    Image path: scmndisp.sys
    Image name: scmndisp.sys
    Timestamp:        Fri May 27 05:30:22 2011 (4DDF7D3E)
    CheckSum:         00009C0C
    ImageSize:        0000A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
What do you use the Tamos Wireless analyzer for?

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please update these drivers and upload the requested files so we may be of more help.
I haven't used the Tamos Wireless analyzer in a long time. Would you happen to know the cause/why I am getting these BSOD's?
My System SpecsSystem Spec
17 May 2015   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

Once we get those files, we can help you more.
My System SpecsSystem Spec
17 May 2015   #7
Spikers

Michigan
 
 

Quote   Quote: Originally Posted by essenbe View Post
Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

Once we get those files, we can help you more.
I have uploaded the file in the previous post above but here it is again.

And also I did that CMD scan.
My System SpecsSystem Spec
17 May 2015   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Spikers, the sfc scan you ran, did you run it 3 times with restarts in between each time you ran it?

The file you uploaded is the same file you uploaded the first time, nothing but dump files. Please click this link and upload the results in it's entirety. Do not edit or remove anything. Give it time to complete. Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
17 May 2015   #9
Spikers

Michigan
 
 

Quote   Quote: Originally Posted by essenbe View Post
Spikers, the sfc scan you ran, did you run it 3 times with restarts in between each time you ran it?

The file you uploaded is the same file you uploaded the first time, nothing but dump files. Please click this link and upload the results in it's entirety. Do not edit or remove anything. Give it time to complete. Blue Screen of Death (BSOD) Posting Instructions
Yep I ran it 3 times between restarts and it says the same thing over and over.
My System SpecsSystem Spec
17 May 2015   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Spikers, from what I can see right now, it appears you are having problems with your network adaptors. If you will notice above, every driver named in the past 5 or 6 dump files are related to your network/ wireless adapters. I would recommend you uninstall your Tamos Wireless analyzer, especially since you are not using it. I would then find updates for all of the drivers listed from HP's web site. They are part of your motherboard drivers. I notice your last install was in July of 2014. That is the exact time your BSODs started. My guess would be that you did not install the current motherboard drivers from HP's web site.

I also noticed a lot of errors from GTA5. The game gives a lot of people problems. Most of them relate to ram usage. The game uses a tremendous amount of ram. Please monitor your GPU and CPU temps constantly during gaming.

Please go to C:/Windows/Logs/CBS/CBS.log and copy the log aand paste it on the desktop. Right click the folder, select send to then select compressed zip folder and upload it with your next post. I will get someone to look at it tomorrow.
My System SpecsSystem Spec
Reply

 Random BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD doing random things (Google Chrome, minecraft, random times)
I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are: Driver IRQL not less or Equal System Service Exception and these two I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App