Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System service exception BSOD playing Starcraft 2

24 May 2015   #21
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I'll hold the fix until after the memory upgrade - there may be more to do anyhow by then.
Once you have it sorted....

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

That'll also check the registry for problems with updates.


My System SpecsSystem Spec
.
24 May 2015   #22
JTMoney66

Windows 7 Ultimate 64-bit
 
 

Hello, I'm not sure what to do. I can't start Windows so I am limited to what I can do from the system recovery screen.

However, I did run the SURT recently and ive tried running SFC many many times before the BSOD was preventing me from loading Windows.
I replaced my RAM and tested with no errors.
My System SpecsSystem Spec
24 May 2015   #23
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Sorry - didn't see that you were now unable to boot to Windows

You maybe able to use the Offline SFC to help repair the OS - although I suspect that the Windows repair utility would have run it already...


Your best option in that case is to run the CHKDSK and SFC in offline mode from a Repair Environment boot.

Reboot the computer, and tap the F8 key until you get the advanced boot menu up - one option should be 'Repair your computer'. Pick that one.

Log into your normal account.
You'll get a set of options - pick the Command Prompt one.
At the command prompt, type DIR C:\
- if we're lucky this will bring up a listing of your normal C: drive contents, including the Program Files folder(s) and the Windows folder.
If not, try D:\ or E:\ (etc. until you get the right letter)
then type the following command

CHKDSK <drive>: /R

and wait for it to complete - it could take a few hours, depending on the size of the drive.

Once complete, type

sfc /scannow /OFFBOOTDIR=<drive>:\ /OFFWINDIR=<drive>:\Windows

where <drive> is the letter you found above.
(example - sfc /scannow /OFFBOOTDIR=P:\ /OFFWINDIR=P:\Windows)

Wait for the command to complete. (make a note of the response!).

Once it has, type EXIT and the pick the option to reboot.
My System SpecsSystem Spec
.

24 May 2015   #24
JTMoney66

Windows 7 Ultimate 64-bit
 
 

Alrighty, no worries. I am currently running the chkdsk on drive d where Windows is located. I think I tried running SFC before and I got a response stating "Windows resource protection could not perform the requested operation".

I do have the ability to copy log files via command prompt to an external drive and upload them using a laptop. I'll report back when the scans are done.
My System SpecsSystem Spec
24 May 2015   #25
JTMoney66

Windows 7 Ultimate 64-bit
 
 

The chkdsk completed and it stated "Windows has checked the file system and found no problems".

After running SFC I get this message: "Windows Resource Protection found corrupt files but was unable to fix some of them".

I need to go to sleep soon here. I'll check back whenever possible. I appreciate the help.
My System SpecsSystem Spec
24 May 2015   #26
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That was very quick! Ah- an SSD, so no wonder.
Please post the <drive>:\Windows\\Logs\CBS\CBS.log file (zipped!) when you can, and I'll see if there's anything new there to give us a clue.
My System SpecsSystem Spec
24 May 2015   #27
JTMoney66

Windows 7 Ultimate 64-bit
 
 

Here is CBS.zip.
My System SpecsSystem Spec
24 May 2015   #28
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the Summary again...
Code:
 Line 4819: 2015-05-21 20:34:19, Info                  CSI    00000490 [SR] Beginning Verify and Repair transaction
 Line 4822: 2015-05-21 20:34:19, Info                  CSI    00000492 [SR] Cannot repair member file [l:28{14}]"Hydrangeas.jpg" of Microsoft-Windows-PhotoSamples, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 4825: 2015-05-21 20:34:19, Info                  CSI    00000494 [SR] Cannot repair member file [l:22{11}]"ShvlRes.dll" of Microsoft-Windows-Shell-MultiplayerInboxGames-Spades, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 4828: 2015-05-21 20:34:19, Info                  CSI    00000496 [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 4831: 2015-05-21 20:34:19, Info                  CSI    00000498 [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 4834: 2015-05-21 20:34:19, Info                  CSI    0000049a [SR] Cannot repair member file [l:22{11}]"mstscax.dll" of Microsoft-Windows-TerminalServices-ClientActiveXCore, Version = 7.2.7601.18585, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post the fix protocol in a few minutes.
My System SpecsSystem Spec
24 May 2015   #29
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - jt6aa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\jt6aa
hit the enter key - if you get a 'Not Found' error try
DIR D:\jt6aa
or
DIR E:\jt6aa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\jt6aa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
24 May 2015   #30
JTMoney66

Windows 7 Ultimate 64-bit
 
 

I've run the command, but I still get this persistent BSOD (process1_initialization_failed) stop 0x0000006b.
My System SpecsSystem Spec
Reply

 System service exception BSOD playing Starcraft 2




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD from System Service Exception and KMode Exception Not Handled
For a long time now i have been getting BSOD's, pretty much all of the time from System Service Exception and KMode Exception Not Handled. Sometimes the PC never gets to the BSOD and just freezes up and restarts. This happens at any time whether im doing nothing or on the internet, sometimes it...
BSOD Help and Support
BSOD - Kmode exception and System Service exception
Hi Guys, I'm a composer working on a deadline and have started to experience quite intermittent BSOD's. It appears to happen at higher system loads. I'm reasonably experienced in building custom machines (this is my third on), and so far have never experienced issues with them. This current...
BSOD Help and Support
BSOD system service exception MOSTLY/while playing BF3 and/or WoW
Since building a new computer a few months back, I have been having issues with BSOD's while playing certain games like Battlefield 3 or Wow. But Skyrim and others are fine. I've tried many different drivers for ati and I'm currently using 11.12, but crashes still happen. I don't believe its a...
BSOD Help and Support
BSOD playing Starcraft 2 only system thread exception not handled
Ok so I didn't have any crashing problems for about a month or so and things were going really good. I was using my onboard video since I was waiting for my graphics card replacement to come in. It came in but basically was still messed up (fan in terrible shape, causing it to overheat) so I...
BSOD Help and Support
BSOD System Service Exception
I have gotten this crash while the computer is idle for a few hours, I come back to a blue screen and have to reboot, which works, but a few days later it happens again, three times so far in this very new system, only about 30 days old, built by a local shop which installed Windows 7 Home Premium,...
BSOD Help and Support
BSOD System Service Exception
It showed up today when i want to play The Sims 3. It wasn't like this last week when i play the game. I have upgrade my graphics card driver and it doesn't seem to be the problem. I have attached the mini dump. I really appreciate your help.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App