Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when running more then one application (mostly gaming)

22 May 2015   #1
bnull

Texas
 
 
BSOD when running more then one application (mostly gaming)

I have been getting bsod when I play games and running other applications (streaming while gaming/ music while gaming).

I recently upgraded my hard drives assuming that was the culprit, but the blue screens still continue.

I have done all windows updates, and have done a fresh windows 7 ultimate (genuine) install.

Any help would be nice. Attached is the dmp files (i dont know how to read them).


My System SpecsSystem Spec
.
27 May 2015   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to the forum.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Memtest should be done overnight.
My System SpecsSystem Spec
Reply

 BSOD when running more then one application (mostly gaming)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Running an application that reside on another PC
Hello I got a software installed on another PC in my house. The software bylaw stipulate that it could be installed on just one PC. I would like to be able to use it from another room Can I run the software remotely using my own PC as a terminal? Both PC wired to the same router ...
Network & Sharing
Running Legacy Application
Currently running Windows 7 Ultimate. I am trying to run a legacy application made for XP, right clicked on the installer and checked off to run in compatibility mode however after trying to install the application, I was met with several different error messages pertaining to missing dll's etc. ...
Software
How do I keep a Java Application running at all times?
Hi, I am developing a Java based application and need to make sure that if it crashes, it comes back on. I tried setting it up as a service, but as it requires interaction with the user, the "Interactive Services Detection" is tripped when I try to bring it up. My thoughts right now are to...
Software
Error SidebySide when running Application
i have 2nd Notebook , and when i want run some application , there's error like this "The Application has failed to start because its side-by-side configuration is incorrect. please see the application event log or use the command-line sxstrace.exe tool for more detail" there's any solution ?
Software
BSOD with NVIDIA 610M when running with any application
Hi I am using a ASUS K43S Laptop. The laptop is auto configured to run Intel 3000 HD Graphics as display. When I select applications like Adobe Photoshop CS 5 and Diablo 3 to run with the Nvidia graphics card, a BSOD appears. I have tried to update Nvdia graphics to the latest drivers ver....
BSOD Help and Support
Cannot Start Virtual Application (Was running)
Hi Forum, Hope you guys could share your experience and expertise in the problem I am facing. Tried the forum search feature without success. I installed win 7 xp mode successfully and was able to install few programs (safari, chrome, etc) on it. Now when I tried to run the safari I got this...
Virtualization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App