Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSODs after waking from sleep

24 May 2015   #1
Nova Prime

7 64 Pro
 
 
BSODs after waking from sleep

My self-built PC gives me BSODs immediately or soon after waking from sleep, but not regularly. It can happen twice in a week and then not happen for maybe two months, but it does keep happening. I use it every day and put it to sleep every night and occasionally during the day. I generally don't shut it down or reboot it unless I have a specific reason to.

Today after it happened again it took a lot longer to boot than normal, with the green/blue ring spinning in the middle of the screen for ages before it took me to the desktop. Then shortly after that, before I'd opened anything, it bluescreened again (not a usual occurence), then took an unusual amount of time to start up this time too, but is working.

I ran memtest when I first got it so I don't think bad RAM is the problem.

Help please!


My System SpecsSystem Spec
.
25 May 2015   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Uninstall Virtual Clone Drive.

Update Realtek network driver from Realtek

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Report us for any further BSOD after doing these three.
____________________________________________________
Code:
BugCheck 1E, {ffffffffc0000005, fffff88007c3efa0, 0, 0}

Probably caused by : HTTP.sys ( HTTP!UlDisconnectEvent+d4 )

Followup: MachineOwner
---------
Code:
BugCheck 50, {fffff8a1152d0f60, 1, fffff880012cce27, 5}


Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonClose+1e7 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
01 Jun 2015   #3
Nova Prime

7 64 Pro
 
 

Okay, I updated that driver and uninstalled Virtual Clonedrive. I also removed several (but not all) startup items. I've still had bluescreens though. Here's my new file.
My System SpecsSystem Spec
.

02 Jun 2015   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Why not all? They are not needed to be there, but they can cause problems by staying there.

Anyway, this BSOD is caused by Logitech driver.
Code:
BugCheck D1, {0, 2, 8, 0}

*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
Probably caused by : LHidFilt.Sys ( LHidFilt+e555 )

Followup: MachineOwner
---------
Search for any possible driver update for your mouse. Support and Downloads
My System SpecsSystem Spec
02 Jun 2015   #5
Nova Prime

7 64 Pro
 
 

The software I've let start up is video driver software, Xbox controller software, Sticky Notes, MS Security Client, Logitech SetPoint, and Ditto (which just monitors my clipboard).

The driver (only for XP, which you linked) for my Logitech mouse is over a decade old, but I'm running the current version of SetPoint which correctly detects and works with my mouse. Should I uninstall it and reinstall it? Is that likely to change anything?
My System SpecsSystem Spec
02 Jun 2015   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you dont install SetPoint, does the mouse work, as a simple USB mouse? If it works (a USB device should), then dont use SetPoint.

In Startup, Sticky notes and MSE will be enough.
My System SpecsSystem Spec
02 Jun 2015   #7
Nova Prime

7 64 Pro
 
 

It works, but it's a lot nicer to use with SetPoint. It feels better and I'm able to use all its buttons.
My System SpecsSystem Spec
02 Jun 2015   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

As you said, the mouse is over a decade old. It does not have the required drivers for the operating system. In this case, SetPoint is causing the BSODs.

Keeping everything in mind, take your decision.

If you are ready to neglect the BSODs, continue using SetPoint.
My System SpecsSystem Spec
Reply

 BSODs after waking from sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs from new build (waking from sleep, on desktop)
I've recently upgraded my computer and so far, the path has been full of nasty surprises. The system is stable, at least it was with my initial AMD HD7950, but that card had a defective fan so I opted for another graphics card. The build with this card was fully stable. Anyways, for a few...
BSOD Help and Support
Waking from Sleep understood but wont go back to sleep
I setup 2 Media center PC's and have them both goto sleep when not being used. They wake up in the middle of the night due to mcupdate_scheduled which I understand and know how to turn off. My problem is I want to leave it the option on and have the computers go back to sleep after the update is...
Media Center
Waking from Sleep LAG
I can boot really quickly but after I try to resume from sleep it takes at least 10 min. The strangest thing. This same build with my last windows seven install did not have this problem with the exact same hardware. This is a recent install. I have all the newest drivers and windows updates. No...
Hardware & Devices
Random BSODs, but most often after waking up from Sleep.
Like the title says, I often get BSODs while randomly using my computer. It's never anything high stress, but it does happen more often when I put my computer to sleep and then turn it on. EDIT: I also managed to take a picture of the error, if that helps at all.
BSOD Help and Support
BSOD when waking from sleep
Hi all, I have been getting random BSOD after waking the computer from sleep. On the last BSOD the CHKDSK utility ran automatically when the computer rebooted. The computer is a self build. Thank you for looking, hope you can help.
BSOD Help and Support
Waking from sleep
My compuer is set up to go to sleep after 1 hour (hybrid sleep option has been turned off). If I wake up the machine after about three hours Windows resumes ok but if it is left asleep overnight then instead of resuming Windows it reboots. Any idea why this is happening and is there some way to...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App