Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD from pretty much anything

03 Aug 2015   #61
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

If it's just the SATA port then you shouldn't have to replace the motherboard as long as it's working fine with the SSD plugged into the other SATA port. If more problems start to appear then maybe you'll need to.


My System SpecsSystem Spec
.
04 Aug 2015   #62
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

As Boozad says mate and looking at the specs there are plenty of SATA ports albeit mostly 3Gbs (6) ones and there are I believe slot cards that can add SATA ports as well https://en.wikipedia.org/wiki/Serial_ATA

see pic I have seen some that use Marvel controllers too
My System SpecsSystem Spec
04 Aug 2015   #63
Machinepriest

Windows 7 Home Premium 64-bit
 
 

Urgh... No luck.
Like I said, I unplugged the secondary SSD and the HDD yesterday and plugged my primary SSD in a different SATA port.
It ran fine all day, so I plugged in the HDD to get access to my files. Still no problems, until this morning. When I booted I got an BSOD as soon as I entered Windows.
So I unplugged the HDD to see if that changed anything. It didn't. I got two crashes in quick succession.
One of the crashes didn't result in a BSOD though. The desktop simply froze (as usual) and I got a notification that Windows had stopped working and that I should wait a while to see if it started responding. Then the system rebooted and I got this screen:
Loading Operating System...
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

So I rebooted and got to start reparation which made me do a system restore, and now I'm back in windows.

So I'm guessing there's nothing left to do now but replace the motherboard and the CPU.
My System SpecsSystem Spec
.

04 Aug 2015   #64
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I'm struggling to see any other option at this point.
My System SpecsSystem Spec
04 Aug 2015   #65
Machinepriest

Windows 7 Home Premium 64-bit
 
 

I just purchased a Intel Core i5 4690K 3,5GHz Socket 1140 processor and a Asus Z97-A motherboard.If this doesn't fix things...

A big thanks to everyone who's chipped in with advice.
I really appreciate it!
My System SpecsSystem Spec
04 Aug 2015   #66
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Let us know how it goes.
My System SpecsSystem Spec
04 Aug 2015   #67
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hopefully the problem was the board mate and here are your drivers to save a bit of time as my Asus laptop required quite a bit of fixing using 7 (made for 8) https://www.asus.com/au/Motherboards...Desk_Download/
My System SpecsSystem Spec
05 Aug 2015   #68
Laith

Windows 10 Professional x64
 
 

Hopefully it works, buddy! We have tried so much with failure.
My System SpecsSystem Spec
06 Aug 2015   #69
Machinepriest

Windows 7 Home Premium 64-bit
 
 

Thanks guys.

I'm getting the hardware today and I haven't installed a motherboard in about six years I was wondering if you could give me some pointers.
1. Any general tips on the mounting of the hardware part?
2. Should I use the cpu cooler that comes with the processor or the Corsair Cooling Hydro H50CPU I'm using now?
3. When I get everything in place, should I install from the disk that comes with the motherboard or from the link ICIT2LOL kindly provided? There are 83 files there, so should I just pick the latest of each? Do I even need every file?
4. Should I do all of these installations every time I reinstall the system? Like bios for instance, does that stay installed after a complete wipe?
My System SpecsSystem Spec
06 Aug 2015   #70
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

No just be careful to keep yourself grounded from time to time when working inside the case and the cooler I would still use the liquid one the stock stuff is pretty basic

As a general rule the disk that comes with the board usually is well out of date with some of the drivers and it usually contains a lot of bloatware they try get you to install so just the basic stuff mate untick offers from Norton, Google tool bar etc for example and stuff like that.

So what I do is to look at the date on the board's support site for drivers and see what date they were put out, and if they are reasonably dated back some time ago then install from the disk. (They will open out to show the older drivers too and if you install the latest and it is not right then uninstall and install the previous version.


It would be useful to check what BIOS version the board has by checking it in the BIOS screen then checking the global site for any updates - but with that please be careful - check with us if not sure.
The BIOS is a separate chip on the board that you buy and will have the factory installed one anyway. So you could be up for an update.

The thing is to take your time I know it is hard but worth it in the long run.
My System SpecsSystem Spec
Reply

 BSOD from pretty much anything




Thread Tools




Similar help and support threads
Thread Forum
BSOD doing pretty much anything or nothing at all.
Hello all, first time builder here. been getting random Crashes during anything from casual gaming, web browsing and even just idle.. About 2 a day, i also went a day without. i thought i had licked it , nope :mad: .. all the driver's (to my knowledge) and mb Bios are/is up to date, I've attached...
BSOD Help and Support
BSOD pretty random
Figured id just attach the .zip that the program makes that gives all the information needed
BSOD Help and Support
BSOD pretty sure due to driver
I have run a driver verifier on Win 7 and the startup repair failed to repair it but has found bad driver/s. The dump file is attached. Can anyone read this for me to tell me which driver is bad? Thanks
BSOD Help and Support
0x0a BSOD doing pretty much anything.
Over there years I have been a long time reader / lurker here. Never really made an account, more just ended up on here via Google searches for solutions. That said, a big thank you to everyone here who takes time out of their busy lives to help random strangers on the interwebs. On to the...
BSOD Help and Support
BSOD at pretty much all times.
I have had a blue screen problem for a very long time, and I decided I'm done with it and now I'm posting here. It happens pretty much no matter what I am doing, but more so when I am in games. I have reinstalled the video drivers completely several times and I have also tried updating the...
BSOD Help and Support
pretty new machine BSOD
Hey all, First post here -- getting a BSOD on a newly imaged Win 7 64-bit box. .dmp file is HUGE (>500MB)...I tried to analyze it, but still a newbie and confused. kd log posted below: === C:\dbg>kd -y SRV*c:\symbols*http://msdl.microsoft com/downloads/symbols -z C:\windows\MEMORY.DMP
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App