Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when installing new ram

30 May 2015   #21
superking

Windows 7 Home Premium x64
 
 

Got it.


My System SpecsSystem Spec
.
30 May 2015   #22
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Give it 24/48 hours or so and report back, unless you get a BSOD first.
My System SpecsSystem Spec
30 May 2015   #23
superking

Windows 7 Home Premium x64
 
 

Windows booted fine, but ran super slow. All I could do was take a screenshot of resource manager and CPUz. I tried running Firefox so I could post with that ram setup, but it was so slow it just kept not responding. I put my old ram back in so could post the screen shot.

Attachment 360790
My System SpecsSystem Spec
.

30 May 2015   #24
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Can you install two sticks of the new RAM and boot into BIOS then look for an XMP option for your RAM.
My System SpecsSystem Spec
30 May 2015   #25
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Most of the time I see Harware Reserve that big it is cause by the wrong ram, ram setting, or ram not installed properly as according to the motherboard manual.

At the time of the picture what ram did you have installed and in what slots?
Hardware Reserve should be around 60 MB

It would also be helpful if you filled in your System Specs completely.
My System SpecsSystem Spec
Reply

 BSOD when installing new ram




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when installing AMD graphics driver atikmdag.sys BSOD
I've tried formatting windows 8 and also tried installing drivers seperately for both cards. Nothing has worked so far for me. I am trying to run these cards in crossfire. Both are 7950. As soon as it gets to the part where it installs the display driver, the screen goes black the first time,...
BSOD Help and Support
BSOD'S after installing RAM
Hi, Today i have installed 4 gb more ram on my machine. Difference is just the speed, rest is the same, so i doubt it can cause the problem. After couple hours I've got first bsod, after relaunching windows there was an error "The ofcommon.dll is missing" and after couple more minutes it crashed...
BSOD Help and Support
BSOD after installing new cpu fan??
i have no idea whats going, i scanned for any virus problems, latest norton 360 couldnt find any, used a nimda virus recovery tool (as it now has difficulties installing programs and sometimes chrome fails, although its working for now) and nothing can find any malicious software, here is the...
BSOD Help and Support
bsod when installing new 4gb ram
how would i set the voltage and clock in bios to get the max performance i have 2 2gb ram sticks in at the moment, and i tried to put a new 4gb and a 2 gb in but i get bsod after 5 mins.
Hardware & Devices
BSOD during installing GW2
Hi, I was trying to install Guild Wars 2 and I barely got past autorun when BSOD happened. Tried installing again, happened again. This problem has actually been occurring a few times before (playing other games and random moments). All I know is that the code says 116. Also, I tend to make my...
BSOD Help and Support
BSOD while installing
Hello everyone! I've recently bought myself a new laptop (Sony VAIO FW) which came with Windows 7 Home Premium installed. I was very anxious to try it out, and all went extremely well. But today my laptop unexpectedly BS'ed on me. Thinking it was no big deal (after all, I've experienced many blue...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App