Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 1E on shutdown

11 Jun 2015   #11
Laith

Windows 10 Professional x64
 
 

Hm, this helped alot. Run Driver Verifier for 24 hours.
Driver Verifier - Enable and Disable


My System SpecsSystem Spec
.
11 Jun 2015   #12
cormanaz

Windows 7
 
 

So here is something else that might be relevant, since you seem to think this is a disk problem. I initially set up this system with a RAID 0. One of the drives degraded and I decided not to replace it since that would require imaging the remaining drive, removing the RAID, and restoring the single drive. Before these driver/BIOS updates, I received a message on boot from the RAID controller about the degraded drive. After the updates, I no longer get this message. Maybe this is a clue?

Also I don't know if this is related or relevant, but I was looking at the system log and found an error event ID 36, volsnap, "The shadow copies of volume C: were aborted because the shadow copy storage could not grow due to a user imposed limit." This was not associated with a crash, but AFAIK I haven't placed any limit on shadow copy. Don't know if it's relevant, but something else disk related.
My System SpecsSystem Spec
11 Jun 2015   #13
Laith

Windows 10 Professional x64
 
 

Hmm, i think you've got a failing drive there but i'm not quite sure. Set the controller to IDE and see if that works.
My System SpecsSystem Spec
.

11 Jun 2015   #14
cormanaz

Windows 7
 
 

Re driver verifier, I will do that, but if dump files aren't being written how will I know what the bad driver is?
My System SpecsSystem Spec
11 Jun 2015   #15
Laith

Windows 10 Professional x64
 
 

Snap a picture.
My System SpecsSystem Spec
11 Jun 2015   #16
cormanaz

Windows 7
 
 

OK well this got some action. Set up driver verifier, and changed the HDD to IDE. On reboot, Windows went into system restore. When that finished, I checked TweakBit driver updater, and it lists an outdated driver for Standard Dual Channel IDE Controller. Outdated driver is 6.1.7601.18231 dated 6/21/06 from Microsoft, and available new driver is 9.1.9.1005 dated 7/25/13 from Intel. Moreover it lists this driver twice (see screenshot). Device manager lists two copies of the driver too.

Couple other things. Before, when I set the drive to IDE mode, I would get a DOS-mode dialog (I don't know if from Windows or bios) saying I have a SATA drive in IDE mode and offering to change it to AHCI. I'm not getting that anymore.

Also, the icon for Intel Rapid Storage technology on the taskbar has ! and hovering says the service is not running. When I try to open it, I get an error IAStorUI is not working. I think this could be due to having the drive in IDE mode, tho.

I checked and I am still getting the same BSOD on shutdown, and no log file.
My System SpecsSystem Spec
11 Jun 2015   #17
Laith

Windows 10 Professional x64
 
 

I haven't thought of that. Remove Intel Rapid Storage technology and set the drive to AHCI.
My System SpecsSystem Spec
12 Jun 2015   #18
cormanaz

Windows 7
 
 

Are you certain it's safe to remove RST given that I have a RAID still configured on the system?

No errors, BTW, with driver verifier running. I assume it's safe to turn that off...
My System SpecsSystem Spec
13 Jun 2015   #19
Laith

Windows 10 Professional x64
 
 

Good turn off DV. Yea remove RST.
My System SpecsSystem Spec
13 Jun 2015   #20
cormanaz

Windows 7
 
 

Alright I removed RST. On reboot it installed SATA ACHI drivers. Tweakbit no longer reporting out of date drivers. Still getting 1E on shutdown. Says it completed dump, but still no dump file. Tried changing dump file location just for fun, no help.

I went to disable verifier. When I followed the instructions the last dialog that popped up said something like "no changes made to settings." So again following instructions I went into safe mode to disable it (got the same message; BTW when I restarted I did not get the BSOD on shutdown from safe mode). Anyway went back to enable verifier again to make sure I got it running. Followed instructions again, but after reboot I don't see a process for it on process explorer. Should there be one?
My System SpecsSystem Spec
Reply

 BSOD 1E on shutdown




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Shutdown Unexpectedly, & Windows Did Not Shutdown Successfully Errors
EDIT: 11/21 The latest thing it says is windows did not shut down successfully because the system stopped responding. Anyone? After PC is left unattended more than an hour or so it gets a black screen with no error messages, but the CPU and fans are powered up. I must power off and cold...
General Discussion
BSOD as computer shutdown, turns on after shutdown
I have shutdown correctly, but I get BSOD and then it shutdowns, but then it turns on again.
BSOD Help and Support
Home Prem WOL works, Shutdown doesn't. How's Shutdown meant to work?
Hi, My apologies for asking something which has been asked and answered in many variations, but none of which has helped much. I have three Win7 Home Premium x64 PCs called BoyToy (my main PC), Salsa, and Polka, all of which are wired to a D-Link DIR-655 router. I want to wake and shutdown...
Network & Sharing
BSOD after shutdown, error 0x00000d1, shutdown not complete
Hi guys, I have a problem :cry:, from a few days now I have these BSOD, and could not imagine why, can't remember if I installed anything wrong. Maybe you can help i will attach the archive so I hope it will work. I tried to uninstall the video driver, didn't help. error is Bug Check...
BSOD Help and Support
SLOW Boot and Shutdown after forced Shutdown during Windows 7 Upgrade
Hello All, I have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus...
Performance & Maintenance
Stop Shutdown process after click Shutdown button!
Hello! Please any body tell me how do i prevent shutdown process after click on Shutdown button! :D:D
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App