Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD caused by bad motherboard, still continues after replacement

03 Jun 2015   #1
stiyix

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD caused by bad motherboard, still continues after replacement

Built a custom computer a month ago and have been having BSODs ever since. Took it back to get checked and was told I had a faulty motherboard. The brand is MSI Z97S SLI Krait edition. I had my motherboard, ram, and CPU replaced.

Wiped everything and replaced windows but the BSOD returned. Had my BIOS changed to stop UEFI and updated all my drivers. Was told that would fix the problem but less than 30 mins after using a VPN the BSOD returned.

My suspicion is that I might have an issue with my PCI card since it s the only component I didnt get from my local electronic store and most of the BSODs occur when using WiFi. I've also been having "limited connectivity issues" but im not sure if these 2 are connected. The PCI brand is Tp-link TL-WDN4800.

Mini dump file and pic of blue screen also attached.

Any help would be greatly appreciated.


My System SpecsSystem Spec
.
03 Jun 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Welcome to 7F stiyix, I'll see if I can help you resolve your issues.

All of your dumps are pointing to your hard drive, can you let us know if you have an HDD or SSD and how many? They're not in your system specs.

Code:
Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000006, fffff80002d6c12a, fffff880009a96c8, fffff880009a8f20}

Probably caused by : hardware_disk

Followup: MachineOwner
Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

FAULTING_IP: 
nt!LookupEntryPoint+3a
fffff800`02d6c12a 8b4024          mov     eax,dword ptr [rax+24h]
Code:
ERROR_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  0000000077a9020c

EXCEPTION_PARAMETER3:  00000000c000000e

IO_ERROR: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

BUGCHECK_STR:  0x7E

EXCEPTION_STR:  0xc0000006_c000000e

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre

FOLLOWUP_IP: 
+3a
00000000`77a9020c ??              ???

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware_disk

IMAGE_NAME:  hardware_disk

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  

STACK_COMMAND:  kb

FAILURE_BUCKET_ID:  X64_0x7E_IMAGE_hardware_disk

BUCKET_ID:  X64_0x7E_IMAGE_hardware_disk

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0x7e_image_hardware_disk

FAILURE_ID_HASH:  {ff6dd2a9-5b68-7234-db8c-58a7e01b4a8f}
Can you check your SATA cables are seated correctly at both the motherboard and the hard drive, then run the following checks.

Run SeaTools to check the integrity of your HDD (Do not use on an SSD). SeaTools for DOS and Windows - How to Use

Run chkdsk. Disk Check

Please fill out your System Specs.

information   Information
At 7F we rely heavily on knowing what hardware you have in your system, by filling out your system specs in the manner outlined below your specs will follow you round in every single post so we can see your hardware configuration at the click of a button without having to trawl through threads to find them.
Follow System Info - See Your System Specs to fill in your System Specs with as much info as possible. We're looking for something like the example below.


My System SpecsSystem Spec
03 Jun 2015   #3
stiyix

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

First of all, thanks for the help! Ive updated my system specs and run the Seatools and disk check. There was an HDD error while first running Seatools but it hasnt come when i ran it a second time. Is there a similar way to check out the SSD?
My System SpecsSystem Spec
.

04 Jun 2015   #4
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

You can run chkdsk on the SSD. There's also Samsung Magician you can download, I'll link it later for you as I'm on my phone at the moment.
My System SpecsSystem Spec
04 Jun 2015   #5
stiyix

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I ran the Samsung Magician and my SSD checked out fine. At this point I've ran tests on both the HDD and SSD and the results have been good. Does anyone know if Crystal Disk Info checks compatibility between drives? Im not sure if it's necessary to run more tests after checking both drive individually.

If the F4 error is related to a drive issue and both my drives check out fine, what else could be causing my BSODs?
My System SpecsSystem Spec
04 Jun 2015   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Possibly the SATA cable or port on the motherboard. Try changing cables and see if the BSODs persist, then try different SATA ports on the motherboard.
My System SpecsSystem Spec
Reply

 BSOD caused by bad motherboard, still continues after replacement




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after laptop motherboard replacement 0x000000c2
I had my laptop motherboard replaced a couple months ago and since then every couple of weeks I will get a BSOD. Here is the most recent error message: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional...
BSOD Help and Support
BSOD After replacement of motherboard due to spillage
Hi, I have been experiencing a number of random BSOD not long after my screen, motherboard, and keyboard due to a bad spillage. At first, no problem appeared but then BSOD starts popping up, is this related? and after the BSOD when windows has started up (logged into computer), a blank orange...
BSOD Help and Support
Replacement Motherboard--Do I need to reinstall OS?
I RMA'd the motherboard of a new system I am building because one of its' two banks of DIMM slots was defective. Is it necessary for me to re-install of the OS once I have the same replacement motherboard installed? If it is necessary for me to re-install, am I going to have issues with my...
Installation & Setup
BSOD ntoskrnl.exe - Since replacement of motherboard
Hey All, I replaced my motherboard a little while back from an Asus to this new Gigabyte, and ever since I have been having random BSOD's. Can anyone let me know exactly where/what they are from and how I can resolve these? Thanks so much! Windows 7 Ultimate SP1 AMD Bulldozer FX 8150...
BSOD Help and Support
Motherboard with replacement BIOS
I'm in the process of trying to select a motherboard for another PC. Is it possible to have a mobo which allows for a replacement BIOS so that if the BIOS ever needs flashing and it fails, I can plug a backup BIOS in?
Hardware & Devices
Replacement Motherboard
Hello All, Requesting assistance in replacing a Foxconn 45CM-5A Motherboard. Unable to find another one online and want to replace but be able to re-use both CPU and RAM from the old board. Does any one know of a board that will enable me to do this ? Thanks in advance. Mick C.
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App