Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when opening applications

08 Jun 2015   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Akiba101, Try going here http://www.asus.com/Motherboards/P8Z68V_PROGEN3/ and make sure that is your Motherboard. Update/reinstall all of your drivers. Do Not install any of the AI Suite. I used to own that board and it was a good board. I still believe it is a hard drive and likely your SSD. Creating some space on your other drive will help. Maybe putting some data on an external drive. If you have any friends who have Windows 7 Professional X64 DVD, you can install windows or try a repair install with that. Any disk of the exact same as you have is OK. All the disks are the same it is the Activation Number that is important.


My System SpecsSystem Spec
.
08 Jun 2015   #22
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I have just looked over this thread again. Most of the problems have been Hard drive related, but all have had a different code and different cause. In many cases that is a sign of bad Ram. That is exactly what bad ram will do. If you want to try, run memtest86+. These are the instructions, but it has to be run for a minimum of 8 consecutive passes at a minimum.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
Reply

 BSOD when opening applications




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Slow computer when opening applications, Bad HDD?
Hey, My Windows 7 SP1 computer has recently started being very slow. Startup from the password screen takes 2 1/2 to load the desktop. General file management tasks, like viewing, copying, moving, and deleting files operate at normal speed. However, when I do something that Windows has to "look...
Performance & Maintenance
Applications hang when opening or saving files
When I try to open or save a file in some applications the dialogue box starts to open and then it and the application freezes. The affected applications all use Explorer type dialogue boxes, those using XP and older style dialogue boxes are OK. Explorer itself works OK and I can open files by...
BSOD Help and Support
Diffificulty opening some applications
I have a laptop (Dell Vostro) and a desktop (Dell Optoflex 790) with Windows Seven (*64). Both have Processor i5 and 8 GB RAM. Some applications would not open when using my desktop. However, the same applications will open on my laptop. I noticed a difference between the desktop and the...
Software
MSOffice Pro Plus 2010 Configuring after opening Applications
Very often but not always when I open an Office Application, a configuration window opens immediately after the application window and takes some time to configure the application window before closing. It is only after the configuration window has closed that I can start using the application...
Microsoft Office
applications not opening
hi guys i have this problem with my new netbook there are applicatins that are not running such as google crome , mozilla, and other apps when im running my window normally but when i boot up my computer to safe mode it will allow those application to run. yesterday it was woking properly and when...
General Discussion
New applications opening under current window
I don't know quite how to describe this problem other than saying that when I open a new window (office, or any other software), it will open up but appear underneath whatever other window I have focused already. This is especially annoying because it doesn't seem to have been doing this prior to...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App