Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Checking a website and purple screen crash, then BSOD on start-up

06 Jun 2015   #1
Shinjikuna

Windows 7 Professional 64bit
 
 
Checking a website and purple screen crash, then BSOD on start-up

I was checking the weather this morning and my computer purple screen-ed and turned off. Now it will blue screen constantly on start-up unless I go into safe-mode. I... may of accidentally deleted something in frustration earlier that allowed my computer to even blue-screen.. So any help on to why this is happening, please and thank you!


My System SpecsSystem Spec
.
09 Jun 2015   #2
Shinjikuna

Windows 7 Professional 64bit
 
 

So I've tried to do a disk check up, updating my drivers, and rolling back my graphics card... No luck, can I get some help please?
My System SpecsSystem Spec
09 Jun 2015   #3
Shinjikuna

Windows 7 Professional 64bit
 
 

So I've tried to do a disk check up, updating my drivers, and rolling back my graphics card... No luck, can I get some help please?
My System SpecsSystem Spec
.

15 Jun 2015   #4
Shinjikuna

Windows 7 Professional 64bit
 
 

Sorry to post on this again, but I've literally run out of options and I don't have the money to just start throwing at this in hopes of fixing it. Can I please get some help?
My System SpecsSystem Spec
15 Jun 2015   #5
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Shinjikuna I will see if I can find you some help.
My System SpecsSystem Spec
15 Jun 2015   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Display caused BSOD.
Code:
BugCheck 116, {fffffa800594e010, fffff880073616bc, 0, 2}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1616bc )

Followup: MachineOwner
---------
Happening with multiple versions of the display driver.
Code:
    Image name: nvlddmkm.sys
    Timestamp:        Thu May 28 08:19:51 2015 (5566824F)
Code:
    Image name: nvlddmkm.sys
    Timestamp:        Thu Feb 05 23:31:37 2015 (54D3B001)
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

The computer seems to be old.
Code:
BiosVersion = V1.9
BiosReleaseDate = 09/14/2010
SystemManufacturer = MSI
SystemProductName = MS-7636
When you dusted it for the last time? Is the computer running hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .
My System SpecsSystem Spec
16 Jun 2015   #7
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

In addition to what the others have asked mate use my ditty and post back the results

Using HW Info

PART A:

You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE

Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.

See this for the rail voltage info

http://www.tomshardware.com/reviews/power-supply-specifications-atx-reference,3061.html (Section 2.)

The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel

FOR OTHER COMPONENTS

PART B:

Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

Use PART A: and post back the shot of the screen as per my pic using this http://www.vistax64.com/tutorials/148532-how-use-snipping-tool-vista.html


The section you are looking for maybe Nuvoton (Asus for example) or ITE (Gigabyte for example) they are two common ones on motherboards but as I said the Vbatt is a dead give away for the section I want to see. Plus as Arc has said mate some system specs please very hard "working in the dark"
My System SpecsSystem Spec
16 Jun 2015   #8
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Thank you Arc and ICIT2LOL for coming to help.
My System SpecsSystem Spec
16 Jun 2015   #9
Shinjikuna

Windows 7 Professional 64bit
 
 

Well my computer cannot run in normal mode, only safe mode and when I start up furmark it says it couldn't start up ZoomGPU and closes.

Um, i haven't dusted down there in a while.. like maybe a few months? I'm usually too scared I'll break stuff, any tips for a broke person to safely dust it? = w=;

EDIT: Just saw the ohter post about HWiNFO. Downloaded the right bit but it says it cannot install itself? I assume being in safe mode being the issue..
My System SpecsSystem Spec
17 Jun 2015   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Shinjikuna View Post
Well my computer cannot run in normal mode, only safe mode and when I start up furmark it says it couldn't start up ZoomGPU and closes.

.
You will not be able to perform the stress test in safe mode. Because safe mode keeps the graphics card disabled. And here the question becomes uppermost. It strengthens the notion that the graphics card is failing to perform its job.

If you can borrow a graphics card from friends or family, apply it there and see if it changes teh situation or not.
My System SpecsSystem Spec
Reply

 Checking a website and purple screen crash, then BSOD on start-up




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Why is my screen purple/pink?
Just upgraded from Vista ultimate x64. Soon as it restarted the desktop has a purple/pink tint but only running at 1920x1080. If i lower the res its fine. Monitor: BenQ G2412HD Video card: ATI 4870HD dual edition.
General Discussion
BSOD 0x0000003b after website crash
While using Chrome, the website I was viewing crashed and again after refreshing the page, followed shortly by my laptop locking up. Immediately following the lockup, a BSOD with error code 0x0000003b happened. It doesn't seem to be related to a particular browser, as it happens in Firefox as well....
BSOD Help and Support
Laptop crashes (shows blue screen) whenever I start a blocked website
Hi, Just installed Hotspot Shield (latest version 2.74, also tried 2.65) and its install was successful but after it's turned on (green icon shows) then I start a blocked website like YouTube, Last.fm or Metrolyrics.com on Firefox, my laptop crashes and shows blue screen, shows something ...
BSOD Help and Support
Screen Turns Red and Purple...
Hi again guys, so I was playing a game (Eve Online) full screen yesterday, and noticed that when I minimized the game, the screen to the desktop, turns red and somewhat purple, which is a weird behaviour, which I haven't experienced. I don't think this is a hardware issue, because this laptop is...
Performance & Maintenance
Purple/blue lines over screen, not sure if driver or motherboard issue
Hello, I have a problem with my computer. I just restarted it, and it ended up booting with purple/blue lines all over the screen. So the first thing i did was go into device manager. All it told me was a caution symbol next to my NVIDIA geForce 8500 GT. so i downloaded and reinstalled the...
Drivers
Win 7 Blue screen crash at start up
Hi, I'm getting a Blue screen intermittently at start up just after Windows has started. I suspect it has something to do with USB periferals being left connected. I haven't noticed a crash when either my IPOD or MPG player is disconnected. I do have a USB Disc Drive and Keyboard connected at...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App