Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD shortly after turning on the laptop, error 0x0000001E

07 Jun 2015   #1
Broken

windows 7 Professional 64bit
 
 
BSOD shortly after turning on the laptop, error 0x0000001E

I uploaded the created zip file into my post.


My System SpecsSystem Spec
.
09 Jun 2015   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Remove AVG for testing purpose. Use MSE in its place.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.

warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



 Clean boot
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:Run Disk Check on your Hard Drive for file system errors and bad sectors on it.

 Hard Drive Diagnostics


  • Double click and open my computer.
  • Right click on desired drive and hit properties.
  • Click on tools tab and Check now.

Read complete instructions on the tutorial: Disk Check

Other Tests:
 



Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Memtest should be done overnight.
My System SpecsSystem Spec
Reply

 BSOD shortly after turning on the laptop, error 0x0000001E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on or shortly after boot into Windows, error 0x0000007e
Hello all, I just went through the process of upgrading my motherboard and everything worked fine except the occaisional BSOD on startup. I assume that I am missing a driver or something but I am not sure Here are two BSOD error windows and all my dmp files are attached! ...
BSOD Help and Support
BSOD Shortly After Login, Error: 0x0000003B
Every time I log onto my computer the computer runs fine for about a minute then I get a blue screen with the 0x0000003B: SYSTEM_SERVICE_EXCEPTION error. This happens every time you boot up the computer normally and log in. I can go into safe mode with no problems. If I go to device manager in safe...
BSOD Help and Support
BSOD Watching Netflix and turning off the Laptop, error 0x19
Can you help me guys? I tried to update the drivers, but did not work. Thank You!
BSOD Help and Support
BSOD shortly after loading, do not know error number
The computer has been having some issues for a couple of weeks now. It was running slowly, and it would get the BSOD intermittently, mostly on startup. I attatched the log to the post. I apologize for not providing more information.
BSOD Help and Support
BSOD shortly after start up, 0x0000001e
Title says it all, minidump file attached.
BSOD Help and Support
helpp.. error when turning on the Laptop
i shuted it down.. and when i turned it on i got this... Picture 1 Picture 2
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App