Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at 2 random times.

19 Jun 2015   #11
Laith

Windows 10 Professional x64
 
 

Hmm, try to run SeaTools. I think the HDD is spitting out random drivers as culprits and more. Run also the tools for your SSD.
.
SeaTools for DOS and Windows - How to Use


My System SpecsSystem Spec
.
20 Jun 2015   #12
vlassis

Windows 7 Professional N (x64)
 
 
SeaTools Test

Hello,

I used the SeaTools to test both drives and everything seems to be fine!

Unfortunately I had one more crash today. Should I post the results of the BSOD?

Is there a way to check the RAM?

Thank you
My System SpecsSystem Spec
21 Jun 2015   #13
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello mate now lets start with something very simple read through my ditty and let me know what you find.

UsingHW Info

PART A:

You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 -Download < download the right bit version andclose the right hand window select Sensors and scroll down to the power sectionwhere you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give awayyou are in the section for the rail voltages. There are other section titlesand one that pops up often is ITE

Now the voltage on the different rails have to be within 5% =+/-of what is required or the machine will not work properly if at all.

See this for the rail voltage info

http://www.tomshardware.com/reviews/power-supply-specifications-atx-reference,3061.html (Section 2.)

The original right hand window shows the machine running and ishandy for that but for looking at the components in some detail close it anduse the main left hand side panel

FOR OTHERCOMPONENTS

PART B:
Open each smallsquare with + in it on the section the components are in and then click on the individualcomponent/s (it will highlight in blue)- in the right hand side will appear all sorts of details including brandsspeeds and other essential info that particular device. See pic for example

Just use PART A: for starters
My System SpecsSystem Spec
.

21 Jun 2015   #14
vlassis

Windows 7 Professional N (x64)
 
 
hWiNFO results

I downloaded and run the hWiNFO programme.

I did not understand much but I believe (by comparing to your picture) that there might be some issues with the Watts of the CPU and GPU (my values are low)

I will upload a screenshot.

Furthermore, there is an option to generate a report. Should I do that? Can you get any additional information from that?

Thank you very much!
My System SpecsSystem Spec
21 Jun 2015   #15
Laith

Windows 10 Professional x64
 
 

If you want to test the memory run MemTest86+
RAM - Test with Memtest86+
My System SpecsSystem Spec
21 Jun 2015   #16
vlassis

Windows 7 Professional N (x64)
 
 
MeMtest

MeMtest returned no errors.

100% passed...


I really don't know what else might be the problem...
My System SpecsSystem Spec
21 Jun 2015   #17
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello VL mate the rails are fine and form the fan speeds I am guessing the temps are ok for the CPU.

The memtest Laith asked for and I am not doubting you did it right was done for at least 8 passes?

PS I just noticed in your specs the OS is Professional N any reason??

PPS One more thing in the msinfo you have a problem device - the Ethernet controller
My System SpecsSystem Spec
22 Jun 2015   #18
vlassis

Windows 7 Professional N (x64)
 
 

Hello icit2lol,

thanks for the reply.

When you say 8 passes you mean the tests? I think there were 10 that took about 30 minutes. After it was done, I saw a line which said "test passed with no errors press esc to exit" or something like that. So I did.
Or do you mean to run this test for 8 times?

It is Professional N due to the fact that is downloaded through Dreamspark and that is the version I could get. It is genuine not pirated.

Yes I just saw that (the Ethernet controller). I have a Wireless card which is working but I will try to install the drivers for the onboard controller.

Any other advice?

(In the end it will be the DVD drive.xD)
My System SpecsSystem Spec
22 Jun 2015   #19
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yes mate where it says pass on that readout it should run to go to 8 at least. Thirty minutes is nowhere long enough for the memtest to run They can be anything from 6-7 hours or most leave it running overnight - are you using the correct site? Memtest86+ - Advanced Memory Diagnostic Tool
My System SpecsSystem Spec
22 Jun 2015   #20
vlassis

Windows 7 Professional N (x64)
 
 
memtest

Yes I had the right site but I did not notices the passes. I am sorry. I will run it again later today and leave it!

Thank you.

I will post the results later
My System SpecsSystem Spec
Reply

 BSOD at 2 random times.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD at random times, at least 3 times per week. Win 7 64 Ultimate
This is my custom build computer of 4 - 5 years. The past year or so i keep getting random BSOD. There are times right after i do a windows update, the very next day my computer will crash. I am running the latest nvidia drivers, and also run windows update. Some times the error says Memory...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSoD at random times and pink graphics at times,
Hello, New member here and thanks in advance for looking. I have a home built w7 Home Premium box we use almost exclusively for Windows Media Center. I started getting bsod's about a month ago and before that got distorted *pinkish* video on restart or bootup at times. Tried using...
BSOD Help and Support
BSOD at random times, 2 times/day in the last 4 days
Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure. I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with...
BSOD Help and Support
BSOD at random times, other times just lock up
I have been getting BSOD's for the last week or so. I can't read the entire screen in time when it happens but I do catch something about a hardware issue. This has happened several times while playing video games, but others when surfing the web, or just doing some typing. I've checked all of...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App