Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: stop 0x00000124 after Windows loads. rinse/repeat.

20 Jun 2015   #11
pauleden

Windows 7 Ultimate 64
 
 

sfc report.

It finished with "Windows Rescource Protection found corrupt files but was unable to fix some of them."


My System SpecsSystem Spec
.
20 Jun 2015   #12
Gator

Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
 
 

Did you run Intel Processor diag with admin privileges? The report seems to say that you may not have admin rights.

Right-click on the program and click "Run as Administrator"

Let me check out your SFC scan.
My System SpecsSystem Spec
20 Jun 2015   #13
Gator

Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
 
 

Im pretty sure these corrupt files can pretty much be ignored as they were introduced by an update, if i remember correctly.

I'll see if I can get Noel to take a look and confirm/provide a fix.


Code:
2015-06-20 16:18:20, Info                  CSI    00000346 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.18869_none_fde7d5f71db043ad\utc.app.json do not match actual file [l:24{12}]"utc.app.json" :
  Found: {l:32 b:hxHfXj427JxbVLpmOJKBMMwJ3nfvwV57qrOPwblWU6s=} Expected: {l:32 b:6510UErwHGoFg3sRd3gzh3HSbTceuHem3Rnk0NraKS8=}
2015-06-20 16:18:20, Info                  CSI    00000347 [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18869, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-20 16:18:20, Info                  CSI    00000348 [SR] This component was referenced by [l:162{81}]"Package_250_for_KB3068708~31bf3856ad364e35~amd64~~6.1.1.0.3068708-814_neutral_GDR"
2015-06-20 16:18:20, Info                  CSI    00000349 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-u..ed-telemetry-client_31bf3856ad364e35_6.1.7601.18869_none_fde7d5f71db043ad\telemetry.ASM-WindowsDefault.json do not match actual file [l:66{33}]"telemetry.ASM-WindowsDefault.json" :
  Found: {l:32 b:rX0CB3J2u+8b88W40OtkWxE6DLvV/cFEMvqhqqbQIlI=} Expected: {l:32 b:EeQJzlVPvq9GNIcA2FEwrOjEeuDam1G+ol3x61gKasQ=}
2015-06-20 16:18:20, Info                  CSI    0000034a [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18869, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
My System SpecsSystem Spec
.

20 Jun 2015   #14
pauleden

Windows 7 Ultimate 64
 
 

Quote   Quote: Originally Posted by Gator View Post
Did you run Intel Processor diag with admin privileges? The report seems to say that you may not have admin rights.

Right-click on the program and click "Run as Administrator"
Yes, for sure. It's tricky in safe mode, but I did do it and got the same result whether it was in admin or not.
My System SpecsSystem Spec
20 Jun 2015   #15
Gator

Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
 
 

Make sure you try to remove all Gigabyte utilities.

Code:
gdrv.sys Thu Mar 12 23:22:29 2009 (49B9D175)  
Gigabyte Easy Saver - mobo power utility  driver}http://www.gigabyte.com.tw/Support/Motherboard/Driver_List.aspx 
Driver Reference Table - gdrv.sys 

etdrv.sys Thu Mar  19 22:59:06 2009 (49C3067A) 
Generic Port I/O[br]May be part of  Gigabyte Tools Easy Tune 6 (incompatible with Win7)}Windows Update[br]May be  available from Gigabyte 
Driver Reference Table - etdrv.sys
Code:
AppleCharger.sys Sun Oct 27 21:59:21 2013  (526DC4F9) 
GIGABYTE On/Off Charge driver. See here for details -  http://www.gigabyte.us/MicroSite/185/on-off-charge.htm May cause BSOD on Win7/8 systems - uninstall to test (haven't seen  recently (15Jan2013)}Removal may be necessary. Updates can be found here -  http://www.gigabyte.us/support-downloads/support-downloads.aspx 
Driver Reference Table - AppleCharger.sys
Lets try a few things:
1. Remove ESET and install Microsoft Security Essentials. You can choose to go back to ESET after and test but since ESET was mentioned in a crash dump, lets make sure its not it.

Code:
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  ekrn.exe
Remove ESET and install MSE
Microsoft Security Essentials - Microsoft Windows

2. Monitor your CPU Temperatures. Ensure your fans are running properly. Clean the inside of the PC to ensure no dust is accumulating inside

3. Go into your BIOS and reset your BIOS settings to the defaults

4. Run Memtest86+ - Follow the instructions in the tutorial. Run for at least 8 passes or until you find any errors. Stop the test and move onto the next step if you have ANY errors

RAM - Test with Memtest86+

5. Try a clean boot
Troubleshoot Application Conflicts by Performing a Clean Startup

If all of the above fails, your CPU is likely faulty.
My System SpecsSystem Spec
21 Jun 2015   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Yep - the CBS errors are the result of MS mis-coding variable files as static ones (KB3068708) - you can either uninstall the update and hide it, or ignore these two fails.
My System SpecsSystem Spec
21 Jun 2015   #17
pauleden

Windows 7 Ultimate 64
 
 

Here's an update, and it's some interesting news. I swapped in another CPU and still got the BSOD. Back on the original CPU, a single pass of Memtest also came back clean and a USB live Ubuntu also booted, surfed and ran a few applications with no problem. Also, a BIOS default reset was done although as I expected, it didn't help.

So I've been looking into software / Windows issues. None really showed themselves, so I did remove the Gigabyte apps, MSE and Eset, still got the BSOD as the final Windows GUI loads.

I'll be honest, I didn't go for the clean startup, I went straight for a repair install of Windows and so far the machine is behaving itself. I've done all the critical updates. I will run the IPDT again to be on the safe side before getting all my stuff back from windows.old this evening and then see what's come back easily and what will need to be reinstalled.

I want to thank you guys, you've been very helpful and very quick with your advice. I'm very grateful and I'll post back in a day or so once everything has had a chance to soak.
My System SpecsSystem Spec
Reply

 stop 0x00000124 after Windows loads. rinse/repeat.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unrecoverable Hardware Error STOP 0x00000124 upon Windows 7 startup
I am receiving the STOP Error 0x00000124 on a Lenovo Thinkcentre M93P M10A90016US 2 month old PC running MS Windows 7 64-bit Pro with 8 Gig RAM and 500 Gig HDD and can't figure out what's causing it. System was just restored to factory new condition so no new software has been installed. ZIP...
BSOD Help and Support
Stop 0x00000124 computer freezes at random windows 7
Keep getting blue screen error or computer freezes and I must turn it off manually. After last blue screen I get this problem signature. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 2057 Additional information about the...
BSOD Help and Support
Stop 0x00000124
hello, i have this blue screen very often usully every time when i run youtube videos, its very anoying, its like 4 times in 10 min, sometimes i have no prob for day or two but mostly everytime i go for youtube video it happens, i tried clean instal witout any updates, no games but didnt help, i...
BSOD Help and Support
Shutdown, reboot, BSOD while Windows loads. Repeat. What is happening?
Okay, here's what happens: > My computer will randomly shut down, and then boot itself back up. > Before Windows loads, the computer will prompt me w/ 2 choices: Start computer normally, or launch start-up reconfiguration or whatever. > If I choose to start normally, Windows begins to...
BSOD Help and Support
Windows 7 - BSOD: STOP: 0x00000124 while playing games
Need a some help with this error its got me stumped. BSOD: STOP: 0x00000124 Is Windows 7 . . . - x86 (32-bit) or x64 ? 64 - the original installed OS on the system? no - an OEM or full retail version? Retail - OEM = came pre-installed on system - Full Retail = you purchased it from retailer -...
BSOD Help and Support
Keyboard repeat delay, repeat rate??
Anyone know how to change the keyboard repeat delay, repeat rate in RC build? Annoying as hell, as its so slow, and I cant find it anywhere lol! Many thx :D
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App