Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: random BSODs

09 Aug 2015   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes, there were a couple of files missing that could help. Where I said the image, it was referring to the picture just above. When you run the file I linked to, it will ask you if you want to install or uninstall. You want to uninstall, but if the uninstall button is greyed out, it means it is already gone. So, just close it and you are finished. Did I make that clear to you? if not, just ask, I don't mind at all. Just don't install the SPTD. That is what we are trying to get rid of.


My System SpecsSystem Spec
.
10 Aug 2015   #12
kardanadam

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I did uninstall SPDT, positive. Yet BSODs didn't stop.
I upload the new file, hope it will work for you this time.

Really appreciate your help.
My System SpecsSystem Spec
10 Aug 2015   #13
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I think I have all the files this time, thanks. I am noticing a lot of errors reported by Steam Web Helper and some of your games too. But the one that is most concerning to me is this dump from today.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck A, {28, 2, 0, fffff80002d0f930}
Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )
Followup: MachineOwner
That is a problem for me as well as you. If you have memory errors, not of the dump files are reliable. If a memory error occurs, whatever driver or application is running will be blamed, when the real problem is memory. So, we need to check that to make sure.

Please Run Memtest86+


information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip


Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes run at in the same session or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
.

13 Aug 2015   #14
kardanadam

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Sorry for late reply. I installed memtest to a flash drive but don't know how to boot from flash drive? When i restarted it didn't ask me to select drive, so i'm clueless now.
My System SpecsSystem Spec
13 Aug 2015   #15
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Try, when you start up and see the Asus Logo, start tapping F8, select the USB Flash drive and press enter.
My System SpecsSystem Spec
14 Aug 2015   #16
kardanadam

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I ran the memtest, it seems that there are errors. This means that I have to change rams?
My System SpecsSystem Spec
14 Aug 2015   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

To do it correctly, you need to run each ram stick in each slot one at a time. The reason is that it could be bad ram, and probably is, or it could be bad Dimm Slots on the Motherboard. A bad stick of ram will show errors in every slot, as a good stick will show no errors in any slot. So if, for example, you have a stick of ram that passes in slots 1,2 and 4 but shows errors in slot 3, odds are that Dimm Slot 3 is bad. The object of Memtest86+ is to test the ram and the Dimm Slots.

Kingston, I believe gives a lifetime warranty on their ram. The downside is you will be without a computer while the process is completed. You can usually do an advanced RMA with them, where they send you the replacement ram first, then you send in the failing ram. You just have to give them a credit card in case you don't send it back. Also, be sure to replace both sticks and get a kit in return. A kit is tested to work well together where individual sticks are not.
My System SpecsSystem Spec
15 Aug 2015   #18
kardanadam

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I have ran memtest, one ram everytime as you said. Starting with 8 passes, then 6 and lastly 2 passes; not a single error. I know I should do at least 8 passes each but time was limited and I noticed something else: CPU temperature was 90 degree.
That seemed high so I removed the cooler on the CPU to see what happened, actually thermal paste was all black. And after I put the cooler back in his place CPU temperature was 95.

Then I went buy some thermal paste, removed the old paste etc. To be honest I'am quite noob on these matters, even don't know if I placed the cooler as I should.

Right now, HWM diplays that CPU temperature starts at 65-70 and goes to 90-95 while I browse, watch video etc.

I suppose something is wrong, any advise would be helpful.
My System SpecsSystem Spec
15 Aug 2015   #19
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

What CPU cooler do you have? See if this helps

My System SpecsSystem Spec
16 Aug 2015   #20
kardanadam

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thank you for the video, now It works much better: around 50 C. I will report what happens after heavy usage though.
My System SpecsSystem Spec
Reply

 random BSODs




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs during random tasks, numerous BCCodes.
For some reason, my last post here regarding this issue was deleted after ~2 days without warning or response from anyone, so here I am again now that I can view this section once more. For the past week or so now, my PC has been randomly BSODing at seemingly random times.. mostly when gaming....
BSOD Help and Support
Random BSODs with random intervals (have files from SF diagnostics)
Getting random BSODS from 5 times a week to 2 times a week to 0 times a week its really random and i hope the files can describe the issue.
BSOD Help and Support
BSODs, Random times, random error messages.
Hi all, first off, thanks for reading this. Basically, my current build is about 2-3 years old, the newest thing being my PSU (which I replaced after several issues with the GPU drivers constantly crashing, turns out it wasn't the power anyway...) For the past few weeks, I've been having...
BSOD Help and Support
Random BSODs Caused by Random Files with Differing Stop Codes
Since 16 Feb 2013 to today 22 Feb 2013 I've been getting Blue Screens; these appear to be completely random each time with different stop codes and (according to Blue Screen Veiw) are caused by different files. For example; Caused by ntkrnlpa.exe or atikmdag.exe, or ks,sys, or USBPORT.SYS, or...
BSOD Help and Support
Random BSODs during random tasks. Latest error: 0x1000007e
Hey folks. Acer AS4830TG-6808 Win7 Home Premium x64 Acer OEM Machine is less than a month old Added 4GB Ram stick (PNY, now total of 8GB) Have been getting random BSODs over the last week or so. I'm not sure of the reasoning, however I suspect it may be gaming related. Errors began while...
BSOD Help and Support
Random BSODs; Firefox 4 random crashes
I recently built a new desktop PC running a clean install of Windows 7 Ultimate 64-bit retail version (see my system specs). All hardware was purchased new, and all software installed were fresh installs. All Windows Updates were applied successfully, including SP1. I have also updated all drivers...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App