Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD from Out of Nowhere, Everything Running Fine Before First BSOD

23 Jun 2015   #1
Kronenbouget

Windows 7 Ultimate x64
 
 
BSOD from Out of Nowhere, Everything Running Fine Before First BSOD

Hello Seven Forums community, this is my first post here!

So I made this PC, and haven't gotten any problems or BSOD (just one with a faulty GPU, fixed that already)
Yesterday, I turned on the PC and noticed it went from my desktop to black then a BSOD appeared, and I got freaked out, heh.

I went into Safe Mode with Networks and searched for some help (had no BSOD on Safe Mode) and read it MIGHT have something to do with overclocking. (I have my processor to 4.2GHz), so I defaulted the frequency and voltage but still got the BSOD.

Later that day it booted up no problem (don't know why). Even played some games and no BSOD at all! But today I booted up and same story, getting the BSOD.

I'm uploading the files since I've ran out of ideas.
Could be caused by hal.ddl or ntoskrnl.exe? I'm not really sure about it.

Thanks!


My System SpecsSystem Spec
.
23 Jun 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, Kronenbouget and welcome to the forums. I have looked at all your recent dump files and they are all the same.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa800fa73028, bf800000, 200401}
Probably caused by : GenuineIntel
Followup: MachineOwner
Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8012d1e028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000200401, Low order 32-bits of the MCi_STATUS value.
An 0X124 error is a generic Hardware error, meaning some piece of hardware has gone bad/is going bad. Or, it could be a very corrupted driver causing some piece of hardware to act if it is dying. The error gives us no idea of which piece of hardware it is. I know you said you set everything to defaults, but I would like you to do something just to make sure.

Please go into bios and look at your SATA Controller and see what it is set to (IDE, AHCI or Raid) and remember which it is. Then set Optimized Defaults. After Defaults are set, go back to the sata controller and make certain it is set to the same as it was when you first checked. Otherwise it will not boot. Check your ram and make sure it is set to the Manufacturer's Frequency, Timings and Dram Voltage. Set your Boot Order, save and exit. Make no other changes.

When you get into the OS, if you don't have it download and install CPUz CPU-Z | Softwares | CPUID Please upload screenshots here of the CPU, Mainboard, memory and SPD tabs. On the SPD tab you can select each Dimm Slot from a dropdown list in the upper left. Just post the Dimm Slots that have ram installed. This will tell you how to upload screenshots and files at Sevenforums Screenshots and Files - Upload and Post in Seven Forums.

If you have any of the Gigabyte utilities installed, uninstall every one of them. They are known causes of BSODs.

Then please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Let us know how it goes after that. Thanks.
My System SpecsSystem Spec
23 Jun 2015   #3
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You are also getting a lot of errors from Corsair Link, Metal Gear Solid and League of Legends.
My System SpecsSystem Spec
.

23 Jun 2015   #4
Kronenbouget

Windows 7 Ultimate x64
 
 

Hello essenbe

I am currently typing this from my computer in Normal mode, I haven't got a BSOD in 5 hours. If I turn on the computer tomorrow and get BSOD, I will do everything you listed; If I don't get BSOD I will mark as solved.

I find it weird that League, MGS are causing me problems (I play them almost daily); but I did unisntall Corsair LINK, since my bsod research led me to believe that it was causing me troubles.

Also I will unisntall the GIGABYTE utilities, always had trouble with those anyways. Thank you!
My System SpecsSystem Spec
23 Jun 2015   #5
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, just let me know.
My System SpecsSystem Spec
24 Jun 2015   #6
Kronenbouget

Windows 7 Ultimate x64
 
 

Alrighty so I turn on and got BSOD, I'm going to do what you asked me to, I'll go to bios first, I deleted the GIGABYTE utilities already.

EDIT: Errr I deleted them but didn't uninstall, woops. I tried but it says Error 1719. Windows Installer service could not be accesed.

I'll just try to do the first thing you asked me then try to unistall if I get to boot up on normal mode
My System SpecsSystem Spec
24 Jun 2015   #7
Kronenbouget

Windows 7 Ultimate x64
 
 

Okay, so I did that, and got into the OS and ran CPU-Z. Got the screenshots now and I'm gonna do the command prompt thing.

Oh, and another thing. I'm a bit worried tho, when I uninstalled App Center (it's from GIGABYTE), it did uninstall all the stuffs and utilities but I think it also uninstalled @BIOS, will this cause trouble? I tried going into the GIGABYTE to download a new bios but it says my system does not match the the one I downloaded. Any insights? I'll edit when I'm done with command prompt thing.
My System SpecsSystem Spec
24 Jun 2015   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

There is a method in bios you can use and update bios with a USB Drive. Please upload the CPUz files here. This will tell you how. Screenshots and Files - Upload and Post in Seven Forums. Just don't zip them, upload them as a JPEG or PNG, whatever they are.
My System SpecsSystem Spec
24 Jun 2015   #9
Kronenbouget

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
There is a method in bios you can use and update bios with a USB Drive. Please upload the CPUz files here. This will tell you how. Screenshots and Files - Upload and Post in Seven Forums. Just don't zip them, upload them as a JPEG or PNG, whatever they are.
Sorry, here they are
My System SpecsSystem Spec
24 Jun 2015   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The screenshots look OK. The only suggestion I could make is change the Command Rate (CR) from 1T to 2T. 2T is a little more stable than 1T.

Also, if you had a BSOD, please upload the BSOD posting instructions again Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
Reply

 BSOD from Out of Nowhere, Everything Running Fine Before First BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on startup. Pc used to run fine, now its slow after the BSOD.
So I was logging onto my pc, and I got a BSOD on startup. It was an f4 error. SSD firmware was not the problem, it was up to date when the BSOD happened.
BSOD Help and Support
Running fine, then restarted, and BSOD on windows loading screen
Hi there! I am a first time poster on here, but have skimmed the forums for a while. Well I will get right to it. Its a desktop I built about 4 mths ago. I was goofing off all day, ran perfect. I got my package from Tiger.com, yay new memory. I also bought a drawing tablet that came w/ photoshop...
BSOD Help and Support
BSOD: ataport.sys was running fine
BSOD here. File attached. Left the house yesterday and the computer was fine. Came back and it was BSODing and re-booting showing ataport.sys in the bsod. I've tried a system restore, no luck. Boots in safe mode. Checked drivers, no apparent conflict, but I think if may be a driver problem...
BSOD Help and Support
Running fine but Slow Gameplay
Hi everyone,i have a problem with my gta san andreas,it's running fine and the graphics are good But the gameplay is SLOW! :( i tried to download the older one(vice city)it's better than san andreas but still slow,what to do,plz help! My Processor is 2.00GHz and RAM 1.00GB Thanx
Gaming
pc was running fine then turned off
hi all, my pc was running fine. i was playing a game for a few hours. i then left the room for a few mins n when i returned to my pc it had shut down. i tried to turn it bk on and nothin. no fans leds nothin. i unplugged everything for a min then plugged bk in and retried to power up....
General Discussion
BSOD - Was running fine...
Hello. I Have posted a thread alittle while ago regarding a BSOD. Was running smoothly for a good few days now, then all of a sudden i received another BSOD actually two, after i restarted from the first, i came to post my BSOD and it restarted again. Any help is much appreciated DUMP files...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App