Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with same bug check code third time in the last 2 weeks

17 Jul 2015   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, thanks.


My System SpecsSystem Spec
.
17 Jul 2015   #12
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

Alright I ran driver verifier for 24 hours and no crashes had occurred.
My System SpecsSystem Spec
18 Jul 2015   #13
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Sorry for the delay. My internet has been down. But this is the result of the last dump

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a039d8baf886d3, b3b7465f0d755629, fffff80003336290, 1}
*** WARNING: Unable to verify checksum for win32k.sys
Probably caused by : memory_corruption
Followup: memory_corruption
---------
5: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See Kernel patch protection for x64-based operating systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d8baf886d3, Reserved
Arg2: b3b7465f0d755629, Reserved
Arg3: fffff80003336290, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
 0 : A generic data region
 1 : Modification of a function or .pdata
 2 : A processor IDT
 3 : A processor GDT
 4 : Type 1 process list corruption
 5 : Type 2 process list corruption
 6 : Debug routine modification
 7 : Critical MSR modification
My System SpecsSystem Spec
.

18 Jul 2015   #14
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I'm struggling to see anything beyond RAM here, no drivers are showing and nothing hints towards drivers at all. I'll have a think and try and work the dump files again, very strange.
My System SpecsSystem Spec
18 Jul 2015   #15
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Adechi, I asked Boozad to come take a look because all I could see is Ram. I asked you to run Driver Verifier because you ran Memtest86+ and it was still crashing. Sometimes a bad driver will cause a ram error. It seems that is not the case here.

Please look in Add Remove Programs and Uninstall any of the programs you find there. They are all Gigabyte utilities

Code:
APP Center
V-Tuner
System Information Viewer
Smart Recovery 2 
Smart Time Lock
Fast Boot
EZ Setup
EasyTune
@BIOS
Cloud Station 
USB Blocker
On/Off Charge™ / On/Off Charge™ 2
CFOS Speed Internet Accelerator Software
Then I need you to run memtest86+ again for as many passes as possible. If you get an error, stop the test.

Please Run Memtest86+



information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip


Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
18 Jul 2015   #16
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

I didn't have any of those programs and I'll run memtest again.
My System SpecsSystem Spec
18 Jul 2015   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, I just wanted to be sure about the Gigabyte programs. I hate to ask you to run it again, but everything we can find in the dump files says Memory Corruption. Let it run as many passes as you can and before shutting it down, please post a picture of the screen. I just want to see what information it is reading.
My System SpecsSystem Spec
19 Jul 2015   #18
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

Alright here's the picture of the test if thats what you wanted.
My System SpecsSystem Spec
19 Jul 2015   #19
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, thanks.
My System SpecsSystem Spec
19 Jul 2015   #20
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

So far at 9 passes and no errors.
My System SpecsSystem Spec
Reply

 BSOD with same bug check code third time in the last 2 weeks




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
bsod bug check code: 0x000000d1
Yay yet another bsod >_> anyway. While i was on youtube simply watching a video my internet died out (as in i couldnt even load up a text only page without waiting 30 seconds) so i tried to go to speed test (okoola speed test) and then suddenly my computer decided it wanted to blue screen. Just to...
BSOD Help and Support
BSOD bug check code 0x00000116
I've had the BSOD crash for a couple of months. Now its pretty regular multiple times a day, even when I leave my computer on sleep. I've researched a few threads and have done some attempts to fix on my own, but no help. I thought my problem was with NVIDIA GEForce G210 drivers, but I've updated...
BSOD Help and Support
BSOD check code 126
Hi there I am experiencing repeated crashes to BSOD and cannot understand why. The cause is described as kernel power. I am pasting below the message when rebooting and the latest event viewer details. I am also attaching the minidump file. Grateful for your help Luca
BSOD Help and Support
BSOD playing Skyrim, 1000007E this time. New crash code each time
Playing Skyrim runs fine for at least 30 minutes before the bsod. This has happened several times, this is the most recent crash. Zip file attached.
BSOD Help and Support
BSOD Bug Check Code 50
I built a new computer a couple of months back using all new parts from an online store. Ever since day one I have experienced the occasional BSOD. I have tried updating the video card drivers, reseating the RAM etc but to no avail. I have used Memtest x86 and Windows 7 memory disgnostic and found...
BSOD Help and Support
BSOD bug check code 160 and 0
Ok im having some problems here at first i would get a random crash then restart when playing certain games. I was assuming it was a graphics card error or driver error. this is the error i received from this. BODY{font:x-small 'Verdana';margin-right:1.5em} .c{cursor:hand}...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App