Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with same bug check code third time in the last 2 weeks

19 Jul 2015   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Let it run as long as you can. That is all the dump files are telling us.


My System SpecsSystem Spec
.
20 Jul 2015   #22
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Adechi, if you haven't had any errors, stop. We'll try something else.
My System SpecsSystem Spec
20 Jul 2015   #23
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

Alright 22 passes with no errors, I'll stop it now.
My System SpecsSystem Spec
.

20 Jul 2015   #24
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

That's great, sort of. If you know what I mean. Please download some good software to monitor your CPU and Graphics temps. In your case they may be the same thing. I want you to run a couple of tests. Please try to run Furmark going by this tutorial. In your case do not check post FX. Your temps will go up really high and very fast. Monitor them constantly. If they get too high, stop the test. Run it until the temps quit rising and level out. Then stop the test. Please post a screenshot just before stopping the test. Screenshots and Files - Upload and Post in Seven Forums. During the test watch for artifacts.

Does your SSD have a toolbox to tell you how well it is running? Please run Seatools on your mechanical drive. Use Seatools for DOS SeaTools for DOS and Windows - How to Use. Read the instructions carefully. I am not sure how we are going to test the SSD.
My System SpecsSystem Spec
20 Jul 2015   #25
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

Yes the SSD has a toolbox, and I got HWmonitor for temperature monitoring. I'll do the Furmark tests tomorrow along with SeaTools.
My System SpecsSystem Spec
22 Jul 2015   #26
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

Alright I did the test and had no artifacts, not sure if these are the screenshots you want but here you go. The temperature screenshot is from around 95% through the test. Also I had another blue screen with a new bug code so here are the dump files.
My System SpecsSystem Spec
22 Jul 2015   #27
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Was the BSOD during or immediately after the Furmark test?

This is what the dump file is saying

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff8000333641f, 1, 0}
Probably caused by : memory_corruption
Followup: memory_corruption
Code:
fffff880`0429a2a0  fffff880`04159200Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
 aswSnx+0xe5200
That is your Avast. Please uninstall it from control panel an then run the Avast uninstall utility Avast Clear https://www.avast.com/uninstall-utility. Replace it with Microsoft Security Essentials (Microsoft Security Essentials - Microsoft Windows). Also do not run Malwarebytes real time protection. Use it as an on demand scanner. It is generally advisable to not run 2 AV programs at the same time. Although Avast and Malwarebytes are different types of programs, it can cause conflicts.
My System SpecsSystem Spec
22 Jul 2015   #28
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Are you having issues with your sound? You are getting a ton of errors from SndVol.EXE which is the Windows sound control.
My System SpecsSystem Spec
22 Jul 2015   #29
Adechi

Microsoft Windows 7 Professional SP1 X64
 
 

The BSOD was actually before the test while I was playing Garry's Mod. I replaced Avast with MSE, but do I disable malicious website protection as well in MalwareBytes? Also one time whenever I would try to open the volume mixer or adjuster it would crash but I would be able to control it using my keyboards volume adjuster. Other than that no issues.
My System SpecsSystem Spec
22 Jul 2015   #30
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Just disable real time protection with Malwarebytes. I think it may help. Some people run both, but it causes some big problems. Once we get everything straight, you can try it on real time again and see how it goes. As far as the sound, you had a ton of errors with that. It is the built in sound volume/mixer for Windows 7. So, I really don't have any idea what to do about it unless you have some other sound programs/hardware installed that may be conflicting with it.

Just understand. What I am doing now is trying everything I can to get rid of anything that may be causing a problem, so you can get your system stable. After we can get it stable, you can try whatever you want to. I would just suggest when that time comes, to try one thing at a time and give it plenty of time to test it. If something goes wrong, you will know what it is. If nothing goes wrong, you can add something else. So, at this point, my concern is to get you stable if I can, whatever it takes.
My System SpecsSystem Spec
Reply

 BSOD with same bug check code third time in the last 2 weeks




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
bsod bug check code: 0x000000d1
Yay yet another bsod >_> anyway. While i was on youtube simply watching a video my internet died out (as in i couldnt even load up a text only page without waiting 30 seconds) so i tried to go to speed test (okoola speed test) and then suddenly my computer decided it wanted to blue screen. Just to...
BSOD Help and Support
BSOD bug check code 0x00000116
I've had the BSOD crash for a couple of months. Now its pretty regular multiple times a day, even when I leave my computer on sleep. I've researched a few threads and have done some attempts to fix on my own, but no help. I thought my problem was with NVIDIA GEForce G210 drivers, but I've updated...
BSOD Help and Support
BSOD check code 126
Hi there I am experiencing repeated crashes to BSOD and cannot understand why. The cause is described as kernel power. I am pasting below the message when rebooting and the latest event viewer details. I am also attaching the minidump file. Grateful for your help Luca
BSOD Help and Support
BSOD playing Skyrim, 1000007E this time. New crash code each time
Playing Skyrim runs fine for at least 30 minutes before the bsod. This has happened several times, this is the most recent crash. Zip file attached.
BSOD Help and Support
BSOD Bug Check Code 50
I built a new computer a couple of months back using all new parts from an online store. Ever since day one I have experienced the occasional BSOD. I have tried updating the video card drivers, reseating the RAM etc but to no avail. I have used Memtest x86 and Windows 7 memory disgnostic and found...
BSOD Help and Support
BSOD bug check code 160 and 0
Ok im having some problems here at first i would get a random crash then restart when playing certain games. I was assuming it was a graphics card error or driver error. this is the error i received from this. BODY{font:x-small 'Verdana';margin-right:1.5em} .c{cursor:hand}...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App