Hello, Adechi welcome to the forums. I will try to help. These are your last 3 dump files
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a039d8a5b91aca, b3b7465ef835ea20, fffff800033360b0, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Followup: memory_corruption
Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a039d8a4b4baa5, b3b7465ef73189fb, fffff80003336030, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Followup: memory_corruption
Use !analyze -v to get detailed debugging information.
BugCheck 109, {a3a039d8a43ba77e, b3b7465ef6b876d4, fffff800033362e0, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Followup: memory_corruption
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes all run in one session to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
Based on your 16 GB of memory, I would suspect the test to take about 18-20 hours. Please let me know the results of the test. If you get an error, stop the test. Even 1 error is a fail. Please be sure to download the test from the link above. You will be able to download an ISO file which should be burned to a CD, or an Auto Installer for USB, which will install the test on a USB Flash drive. Then boot from the media you chose and the test will run automatically and run until you stop it. Be sure to let it run for a minimum of 8 passes.