Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Randomly and windows not working correctly

15 Jul 2015   #1
NasserZ

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD Randomly and windows not working correctly

Hello

,so BSOD started happening like 3-4 months ago i have no idea what did i install to make that happen or anything, it randomly happens while i play games or even start the windows, sometimes when i get a BSOD it gets stuck at it so i have to shut the PC, and sometimes when i try to start the windows again it gets stuck at the beginning or process a little bit and gets stuck so i keep shutting it down over and over until it works and after that i randomly get it again while playing, there were other dump files but i have no idea what happened to them, and some games i used to play before this BSOD happens and i didn't have any problems with them but now my PC gets laggy even if i change everything to low.

Hope that's enough information tell me if anything else is needed.


My System SpecsSystem Spec
.
15 Jul 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, NasserZ and welcome to the forums. I will try to help but I need you to do something for me.

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

Please list all components with Manufacturer and Model. Please also include the PSU and CPU Cooler.

This is the results of your dump files

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800034e7610, address which referenced memory
Code:
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000001236, The subtype of the bugcheck.
Arg2: fffffa8005888d90
Arg3: fffffa8005888e38
Arg4: 000000000007e1d0
Please click the start button and type msinfo32 and click the msinfo icon that appears. Click File, save and save it to your desktop. Please make sure the file type is system information file NFO. Right click it and select send to > compressed zip folder and upload it with your next post. Screenshots and Files - Upload and Post in Seven Forums

Also, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
16 Jul 2015   #3
NasserZ

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hello

I filled my System Specs, here's the System information, and about the scan i tried and rebooted 5 times with scanning each time and still i get the same thing "Windows Resource Protection found corrupt files but was unable to fix some of them."



https://www. mediafire .com/?04qer0mp91393he
It exceeded the limits of the attachments which is 3.91 mb so i had to upload it using mediafire
Note: remove the spaces before and after "mediafire"
My System SpecsSystem Spec
.

16 Jul 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The NFO file you sent was too corrupt to open. There was one in the original files you sent which was corrupted also, that's why I asked for another.

You have a lot of corrupted system files.
My System SpecsSystem Spec
16 Jul 2015   #5
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

NasserZ, I think I just figured out why you have corrupted System files. You have an Operating System that is for an ACER/GATEWAY/PACKARD computer. Those are OEM_SLP keys and only good on the computer they came from the factory installed on. You have it on a Retail Gigabyte Motherboard. There is no way it could activate without a hacker's exploit, which alters system files.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a Genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them
My System SpecsSystem Spec
Reply

 BSOD Randomly and windows not working correctly




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows backup not working correctly
Hi, This is a fresh install on windows 7 SP1, I have windows backup to back up, just my libraries, and documents and what not with no system image. However this always fails after like 2 seconds and gives me the following error code: 0x80070002, could not find specific file, but does not tell...
Backup and Restore
BSOD - BUGCODE_USB_DRIVER, USBs not working correctly.
Well, for quite some time I've had this problem with my USB storage, in which any USB inserted into my computer that contained any bit of storage (External Hard Drives, iPods, Flash Drives, etc...) would not load, windows would not even notice they're even plugged in. (However they DO show up in my...
BSOD Help and Support
USB Hubs not working correctly
I have a couple of powered USB Hubs that work inconsistently. For simple stuff, such as transferring a file from one external drive to another, they generally seem to be OK, but when trying to do multiple transfers, they fail. They also seem to be inconsistant when seeking to link phones and so...
Hardware & Devices
Aero peek not working correctly in my windows 7
Hey guys im having this problem with my my window 7's areo peek preview. It suddenly started malfunctioning 2 days ago. I have no idea how this happened. The screenshot below shows how the areo peek in my computer is works now. This is what i get when i hover a icon in my task bar. ...
General Discussion
Computer crashes randomly and will not shutdown correctly.
I have noticed that my computer will freeze and crash for no reason. Also, noticed crashing alot while playing games, using internet explorer. Also, noticed that when I goto shutdown the computer right as it goes to turn off I get a BSOD and then everytime I restart the computer it always says that...
BSOD Help and Support
Windows 7 Search Function Not Working Correctly
Hey all, I've recently tried running a search for a simple program (I think it was the Disk Cleanup). What I normally do is click the "start" button, then immediately above it on the start menu, I begin my search. Typically, the search pulls up several different items while I am typing what I...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App