Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0xc00000e9 error, Unable to boot to windows, help?

24 Jul 2015   #51
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

tell me what happened. What won't show your Hard drive? Can you go to BIOS > Boot Options and is it seen there?


My System SpecsSystem Spec
.
24 Jul 2015   #52
Matthewtehepic

Windows 7 Professional x64
 
 

Seatools is now bootable. But when going into it. Hard drive doesnt show up. But in bios its there.
My System SpecsSystem Spec
24 Jul 2015   #53
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

do you have the installation disk or USB?
My System SpecsSystem Spec
.

24 Jul 2015   #54
Matthewtehepic

Windows 7 Professional x64
 
 

I have a usb I could put an install disk on.
My System SpecsSystem Spec
24 Jul 2015   #55
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You can create a USB Repair Disk this way System Repair Disc - Create Read all the information and warnings at the top.

You can create an installation Disk this way USB Windows 7 Installation Key Drive - Create. Option 1 is probably the easiest way.

Remember either one has to be the same edition (Home Premium, Professional, Ultimate) as the one you have now. It also has to be the same bitness (X86 or X64) as yours. If you have SP1 installed, the Repair disk has to have been created with the same version of Windows you have with SP1 installed. I would suggest for you to use the Installation disk. It will do anything the repair disk will do, plus it can install Windows which the repair disk can't do.

I don't know how your disk is set up. If it has a 100MB System Reserved Partition it needs to be marked Active. This will tell you how. See Method 2. Partition - Mark as Active

If it has the 100MB partition, it should be partition 1. Assign a drive letter to partition 2. Partition - Mark as Active Use this tutorial. After you mark Partition 1 as active, type select partition 2 and press enter. It will reply partition 2 is the selected partition. Type assign and press enter. It will assign the partition a drive letter. That is necessary for windows to "see" it. Then type exit and press enter. Then type exit and press enter again.
My System SpecsSystem Spec
Reply

 0xc00000e9 error, Unable to boot to windows, help?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unable to start Windows, error 0xc00000e9
Hello everyone. I have a notebook that had Windows 8 64bit preinstalled. I uninstalled it and installed Windows 7 Ultimate 64bit and Ubuntu. Everything went fine, and I used both of them for 2 months. Today Windows won't start. Here's the screen that comes out when I select sda2 in grub2: ...
General Discussion
BSOD during Windows Boot, I/O error 0xc00000e9?
Gateway laptop model number MS2285 Windows 7 Hello my name is John and my friend asked me to fix her laptop since her windows wasn't starting up. Long story short, I tried to reformat her hdd with my windows 7 dvd (which is my answer for almost everything) and the screen right after...
Installation & Setup
Windows Boot Manager error 0xc00000e9
Hey guys, trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large...
Installation & Setup
Boot bcd error 0xc00000e9
Sorry if this is in the wrong thread. If it is, please move it to a more proper one, thanks! Today I went to turn on my laptop and got the following error message on startup: "File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred" and it says that it could be caused by removing a...
BSOD Help and Support
Windows Boot Manager Install error 0xc00000e9 -
Hi all, Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. I made things worse, how I don't know. My system statrt up, loads the windows 7 files and then comes up...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App