Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod at boot

22 Jul 2015   #1
sevenuser1

windows 7 ultimate 32bit
 
 
Bsod at boot

Hi everyone I am getting the bsod at every startup. My laptop run only about 10-15 minutes and get the black screen. I have Samsung mini laptop with 2 GB of ram and 300 GB hard disk. Thanks in advance


My System SpecsSystem Spec
.
23 Jul 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

My System SpecsSystem Spec
23 Jul 2015   #3
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, lof1 and welcome to the Forums. You had 2 Dump files and this is the results


Code:
Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c000001d, fffff8800306987e, fffff880067dae80, 0}

Probably caused by : memory_corruption

Followup: memory_corruption


Code:
Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffe9fffffa80, 1, fffff80003371210, 5}


Could not read faulting driver name
Probably caused by : discache.sys ( discache!ScpConvertHandleToKernelHandle+31 )

Followup: MachineOwner

That is your disk cache driver and is provided by Windows Update. Please make sure your Windows Updates are all installed.

With the information I have now, it looks like it could be your Ram or your Hard drive. Since, ram is most important to reading the dump files, I would like you to run memtest86+. Please download it from the link below and run a minimum of 8 consecutive passes.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

Also please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
.

Reply

 Bsod at boot




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 9f a few minutes after boot, hang on boot/shutdown sometimes...
The BSOD doesn't always happen, but it happens maybe once a week. The BSOD info file shows the following: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem: BCCode: 9f
BSOD Help and Support
BSOD on boot- PFN_LIST_CORRUPT can't boot from disk. Any options?
Started getting a BSOD on our laptop yesterday when we tried to start it up and I'm hoping for some help, but not sure how optimistic I am. I can't get it to finish the start up process. If I try to start it on it's own, I get the BSOD with an error message saying, "PFN_LIST_CORRUPT" and code...
BSOD Help and Support
Windows bsod on boot, slow boot, disk thrashing.
Hey everyone. Every time I boot up my PC, windows will load, but will take forever to load, during which lots of disk thrashing occurs, then gets the BSOD. After the BSOD, the pc will automatically reboot. After it reboots, the BSOD will not show back up, however it still takes about 5 minutes...
BSOD Help and Support
Random Freezing/BSOD, Boot Disk Failure, OK Cold Boot then Repeat
Yesterday Windows Explorer began to stop responding fairly frequently, but would restart itself without issue and continue to run fine. Today, Windows now freezes completely every 45ish minutes - usually a random program stops responding followed by everything, the mouse gets stuck,...
BSOD Help and Support
BSOD system won't boot, error 0x0000007e cannot boot to safemode
Hello, I have been looking through this site for the last couple of days. The situation: My Windows 7 64 bit machine will not boot. It keeps going into Windows System recovery mode. I have tried that multiple times and rebooted each time but no luck. System specs - Windows 7 64 bit, 16gb ram....
Backup and Restore
BSOD KSOD No Boot Win7 64bit Cold Boot
I'm at my wits end... The problem: First installed Windows 7 Proff 64-bit on this machine last monday after installing updates / drivers etc I began to recieve intermitent BSODs then began the trouble shooting. Tested memory with memtest86+ passed manually set voltages / timings ran...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App