Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD during start up after installed the graphic card driver.

23 Jul 2015   #1
nonase

Microsoft Windows 7 Ultimate 64-bit
 
 
BSOD during start up after installed the graphic card driver.

Hi and good morning,

Recently I have re-format my pc to Windows 7 64 bit. I have installed the driver using cd provided with the motherboard and my pc works just fine. However, once I installed my graphic card driver using the latest version from AMD site, (my graphic card AMD Radeon HD 6790), it keep giving me bsod everytime I start up my pc during the windows loading screen. Please help.


My System SpecsSystem Spec
.
23 Jul 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, nonase and welcome to the Forum. You had 1 memory dump.



Code:
Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80093fa010, fffff8800381fcec, 0, 2}

*** WARNING: Unable to verify timestamp for atikmpag.sys

*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys

Probably caused by : atikmpag.sys ( atikmpag+ccec )

Followup: MachineOwner


When did you build this computer? Did you do a clean install of the operating system? Have you run all Windows Updates until there were no more? You should not use the Driver Disk to install drivers. Download them from your Motherboard's web site. https://www.asus.com/Motherboards/M5A78LM_LX/HelpDesk/. They will be much newer drivers. Try reinstalling your Graphics driver. I'll give you some suggestions to get a good clean install.

I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from Latest AMD Catalyst Video Driver for Windows 7 . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial Drivers - Clean Left over Files after Uninstalling and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.
My System SpecsSystem Spec
Reply

 BSOD during start up after installed the graphic card driver.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
ATI Graphic Card Driver BSOD Error 0x00000116 ATIKMPAG.sys
Hi, I have a Compac CQ42 which has an ATI Radeon 5430 as its graphics adapter. Anyhow, recently it started giving me these BSODs whenever I tried installing the video card drivers. The BSOD in question has the following error codes: 0x00000116 (0xFFFFFA8004260010, 0xFFFFFF8800439E02C,...
Graphic Cards
installed HD 2600 pro card, installed AMS driver, but no ccc software?
I was wondering if this would help? http://www.sevenforums.com/graphic-cards/195195-fix-catalyst-control-center-ccc-will-not-open-install.html I see no evidence that the AMD driver installed at all. Right click desktop does not show ccc, and ccc is not in the lower right panel. Windows...
Graphic Cards
Graphic Card not detected after format; drivers can't be installed
Hello, I hope you can help me, because this issue is bothering me. I have a Sony Vaio Laptop VGN FZ38M, Windows 7 Ultimate 32bit. I had Windows Vista Home Premium and I decided to format my laptop and use W7 instead. My graphic card is nVidia GeForce 8400M GT GPU. I visited the official NVIDIA site...
Graphic Cards
graphic driver can't detect graphic card
Hi, i'm running window 7 32-bit OS. My graphic card is (ATI Radeon HD 3200 Graphics) My problem is that after i went to www.amd.com, downloaded,uninstall the old catalyst and installed a new catalyst which matches my OS and yet i got this message whenever i tried to run that catalyst. "No AMD...
Drivers
BSOD when stand by, graphic card crashed, slow start up
hello everyone! i have a satellite a500-1dn i have some troubles with it! it's happening that when it's standing by to crash! i mean the windows it's blocked and the only thing i can do is power off! also happens to crash with BSOD! since now i had 3 crashes of the graphic driver! i tried...
BSOD Help and Support
New graphic card -> Stuck at start up
I just finished upgrading my g-card from a nVidia 9800 GT to a Radeon HD 5770, now when i turn on my comp, it gets stuck at the windows start up screen. I tried putting back in my old g-card and it starts up fine, I also used driver sweeper and uninstalled my nvidia drivers but still no luck. I...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App