Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD every day every time ...

24 Jul 2015   #1
TahaBE

Windows 7 64Bits Home Premium
 
 
BSOD every day every time ...

I hope this gonna help.. If not i buy Windows 8.1


My System SpecsSystem Spec
.
24 Jul 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Plenty of dumps here including 0x1A, 0x1000007E and 0x34. To me that looks like everything is pointing to RAM. Let's rule that out first.

Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+

Note   Note


Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Code:
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  00000000000000b0
Code:
BugCheck 1A, {41790, fffffa80064b2d60, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
    contains the address of the PFN for the corrupted page table page.
    On a 32 bit OS, parameter 2 contains a pointer to the number of used
    PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa80064b2d60
Arg3: 000000000000ffff
Arg4: 0000000000000000
Code:
Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800f168ffd, fffff88002907218, fffff88002906a70}

Probably caused by : atikmdag.sys ( atikmdag+139ffd )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800f168ffd, The address that the exception occurred at
Arg3: fffff88002907218, Exception Record Address
Arg4: fffff88002906a70, Context Record Address

Debugging Details:
------------------


OVERLAPPED_MODULE: Address regions for 'mouhid' and 'crashdmp.sys' overlap

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
The ATI driver has been flagged. Download the latest driver from here and save it to your desktop. Download DDU and follow Display Driver Uninstaller: How to use to remove all traces of your current driver. Reboot and install the downloaded driver.
Code:
fffff880`02906918  fffff880`042d9fe8
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0xbfe8


2: kd> lmvm atikmpag
start             end                 module name
fffff880`042ce000 fffff880`04376000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Tue Jun 23 02:10:51 2015 (5588B21B)
    CheckSum:         000AA93B
    ImageSize:        000A8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
26 Jul 2015   #3
TahaBE

Windows 7 64Bits Home Premium
 
 

Hi
I have run Memtest+86 and the first 10 minutes he find 70 000 Errors its not good i think, and i have one Ram stick 8gb only , and on my motherboard 2 slots so i run in 2 slots same errors 70 000 errors .
Its my RAM stick memory blowed up ? Do i need to buy another one ?
My System SpecsSystem Spec
.

26 Jul 2015   #4
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

In short, yes. Your RAM stick is faulty and needs replacing. I'd recommend buying a 2x4GB kit, at least that way in future if one stick goes bad you can always fall back on the other stick in the interim.

It's not an ideal situation obviously but at least the culprit has been identified.
My System SpecsSystem Spec
26 Jul 2015   #5
TahaBE

Windows 7 64Bits Home Premium
 
 

Ok , after i install new ram kits do i need to run memtest again ?
My System SpecsSystem Spec
26 Jul 2015   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

You shouldn't have to no, the tests you've run seem conclusive enough to blame the RAM stick itself. If you really want to you can just to prove the DIMM slots on the motherboard are OK.
My System SpecsSystem Spec
Reply

 BSOD every day every time ...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System Hang (mostly gaming, also 1 time using Chrome), 1 time BSOD
Hi everyone, recently I switched from my mini-itx board P8Z77-I to my old Z77A-GD65, since then I'm having stability issues. My 2500k was stable at 1,32v, cooled by an H100i, my GPU is at @1200/1500, also tested and stable (7870xt), but now randomly the system hangs, with no bsod, mostly while...
BSOD Help and Support
New built computer bsod's time to time.stop error 0x000000a
it happens time to time and is usually when i open adobe photoshop,aftereffects. Also i cannot seem to open any kind of games on my new computer like fifa 13 ,nfs etc. I have an i7 3770 and 8 gb ddr3 corsair RAM with 1 tb hdd and motherboard is msi B75MA-P45 and geforce gtx560 for graphics card. my...
BSOD Help and Support
BSOD playing Skyrim, 1000007E this time. New crash code each time
Playing Skyrim runs fine for at least 30 minutes before the bsod. This has happened several times, this is the most recent crash. Zip file attached.
BSOD Help and Support
BSOD appears from time to time after I download using torrent
I have a problem appears from time to time. it's started after I used torrent to download. I get the blue screen , windows dumps some memory into a file and I get the following error report after it restarts: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1...
BSOD Help and Support
BSOD BugCheck 1000007E occurs time to time (not under load), need help
Hello, i just registered to this forum. I upgraded my hardware from AMD AM2+ platform to AMD AM3+, so basicly i changed my motherboard and memory( Asus M5A9, kingston 1333 4x4Gb), everything else is the same - CPU- AMD Phenom X6 1055, GPU- Gigabyte HD5830, OLD HDD (more than 3 years im sure, mb...
BSOD Help and Support
Random BSOD , from time to time , during normal daily activity!
Hello. I have been experiencing bluee screens of death in the last 9 months. Sometime , at 3-4 days it just happens , randomly. I hope you guys can help me. System specs : Intel Quad Core 2.5 GHZ 8 GB RAM ATi RADEON 5850 HD
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App