Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: STOP: 7a/21a Would be thankful for some help/input

25 Jul 2015   #1
Eyedea

Windows 7 Home Premium 64bit
 
 
STOP: 7a/21a Would be thankful for some help/input

I'm using my PC in safemode to type this. I've been receiving a various number of BSOD's in the past couple months. First time I put in a new CMOS battery which kept me BSOD free for a couple weeks. Recently I got a STOP: c0000..21a (fatal system error) and then "A disk read error occured" on black screen. I ran sfc scan and chkdsk and it went back to running normal for a couple days. Now it crashes every time I log in with STOP: 0000..7a.


My System SpecsSystem Spec
.
25 Jul 2015   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

There ae no dump files in your logs to analyse. Please don't use CCleaner while we try to resolve the issue.

  1. Open Advanced System Settings
  2. Click on Settings in Startup & Recovery
  3. Make sure both boxes indicated below are checked
  4. In the dropdown box ensure you're set to record Small Memory Dumps
My System SpecsSystem Spec
25 Jul 2015   #3
Eyedea

Windows 7 Home Premium 64bit
 
 

Sorry about that, I just realized this and made the changes. I changed my write debug information from kernel to small memory dump. I restarted and logged on normally which induced the same 7a crash. In safe mode again but there there's no file in Minidump?

P.S. Breaking Bad is one of the best shows ever created.
My System SpecsSystem Spec
.

25 Jul 2015   #4
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Eyedea clue me in. What does this mean?


Quote:
P.S. Breaking Bad is one of the best shows ever created.
My System SpecsSystem Spec
26 Jul 2015   #5
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Quote   Quote: Originally Posted by Eyedea View Post
Sorry about that, I just realized this and made the changes. I changed my write debug information from kernel to small memory dump. I restarted and logged on normally which induced the same 7a crash. In safe mode again but there there's no file in Minidump?
Can you download and run the .bat file below and confirm it created a Minidump.

Attachment 367001

Quote   Quote: Originally Posted by Eyedea View Post
P.S. Breaking Bad is one of the best shows ever created.
Isn't it just.
My System SpecsSystem Spec
26 Jul 2015   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
Eyedea clue me in. What does this mean?


Quote:
P.S. Breaking Bad is one of the best shows ever created.
It's a reference to my signature Jack, it's based on Breaking Bad the TV show. If you've never seen it I'd highly recommend it.
My System SpecsSystem Spec
Reply

 STOP: 7a/21a Would be thankful for some help/input




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Troubleshooting stop 0x7B and stop 0xED.
As Carrona.org says: STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE Usual causes: Hard drive, File system, Boot sequence errors, Device driver, and Virus infection (in particular check the MBR) STOP 0x000000ED: UNMOUNTABLE_BOOT_VOLUME Usual causes: Hard drive problem, File system...
Crash and lockup debug 'How To'
BSOD Stop 0x00000101 and Stop 0x0000009c
I have been getting some pretty bad blue screens lately the first one started out as the "Stop 0x00000101 "A clock interrupt was not received on a secondary processor within the allocated time interval" BSOD but then I stopped receiving those and started getting "machine_check_exception__Stop:...
BSOD Help and Support
HDMI Input: No Input Signal -- Monitor Going to Sleep
Windows automatically updated last night before shutting down. When I turned on the computer this morning, the HP w2207h monitor was not functioning properly. Each time I rebooted, I received the message "HDMI Input: No Input Signal" before the monitor went to sleep. I do not believe it is a...
Graphic Cards
BSOD randomly STOP: 0x0000003B & STOP: 0X00000024
Hello i have had 2 BSOD's or more recently. I dont know why, i only saw 2 of them, but ive had around 3 - 4, the other 1 - 2 were seen by family members but they just turned the pc off and back on... anyhow here are some pictures ...
BSOD Help and Support
BSOD STOP: 0x3B atikmdag.sys/STOP: 0x7E dxgmms1.sys
Guys I'm at a loss I'm getting BSOD's all the time I really don't know what to do with it, and I'm not computer heavy so. If someone here could help me that would be appreciated. I've included a Dxdiag file with the rest.
BSOD Help and Support
Realtek HD Audio, PC input yes/ HDTV input no
ALC 888 codec Latest driver 2.46 installed F7 bios installed Sony Bravia LCD, If I'm using the PC input on LCD, sound works great. If I'm using an HDTV input on LCD, no sound. Anybody got any ideas about this? Would really like to use an HDTV input, picture definition is so much better...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App