Getting a BSOD related to ntoskrnl.exe fairly often

Not sure how long I was supposed to run it for, but I ran it for ~20 minutes. Temperature never went above 86C and stayed pretty stable. Anything specific I'm supposed to do on furmark?

Not really, seems good to me.

Run Prime95, if the temps goes too high stop the test. Hardware - Stress Test With Prime95

Alrighty, I ran Prime95 for 2 hours and 4 minutes, 0 errors and warnings on all cores. Temperature was sitting around 98C for all the cores during the test, and it normally sits at ~50 under normal load.

98C? That must be a bad cooler. Replace your CPU cooler.

That's what I was thinking as well. I've seen differing opinions online. I'll go ahead and replace it and see if the bluescreening stops. Hopefully it's something as simple as my computer shutting down to prevent damage to the CPU.

I have my fingers crossed.

Alright, picked up a coolermaster cooler, popped it in the computer, and it's definitely idling lower, around ~35C. I'll see if it bluescreens.

And it crashed again.

Can you re-install Windows?

Alright, gonna upload the latest DM logs before I do an OSRI. They seem different than the ones I've been having.