Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Intermittent BSOD, "Windows Failed to Start" upon boot

28 Jul 2015   #1
Squakk

Windows 7 Professional 64-bit SP1
 
 
Intermittent BSOD, "Windows Failed to Start" upon boot

Hi guys,

For the last few weeks, I've been getting the "Windows Failed to Start" error screen intermittently when I try to boot my computer. This does not always happen, but several times on occasion. I then proceed to run Startup Repair (with a system restore), and then I am able to launch Windows when it completes.

When I log in, I get the message that "Windows has recovered from an unexpected error," the error type being "Bluescreen." I don't recall ever seeing a bluescreen actually happening; the night before I see the error the next day, my computer seems to shut down without issue.

Here are my system specs:

Quote:
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz 37 C
Sandy Bridge 32nm Technology
RAM
8.00 GB DDR3 @ 798MHz (11-11-11-28)
Motherboard
Gigabyte Technology Co., Ltd. Z68A-D3H-B3 (Socket 1155) 45 C
Graphics
Acer G235H (1920x1080@60Hz)
NVIDIA GeForce GTX 560 Ti
Intel(R) HD Graphics 3000
Hard Drives
977GB SAMSUNG SAMSUNG HD103SJ ATA Device (SATA) 42 C
1954GB Seagate ST2000DM001-1CH164 ATA Device (SATA) 37 C
Optical Drives
ASUS DRW-24B1ST a ATA Device
ELBY CLONEDRIVE SCSI CdRom Device
Audio
Realtek High Definition Audio
I've attached my logs. Thanks in advance.


My System SpecsSystem Spec
.
28 Jul 2015   #2
Gator

Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
 
 

Code:
**************************Tue Jul 28 21:00:21.142 2015 (UTC -  4:00)************************** 
Loading Dump File  [C:\Users\gator\SysnativeBSODApps\072815-21746-01.dmp] 

Windows 7 Kernel  Version 7601 (Service Pack 1) MP (4 procs) Free x64 

Built by:  7601.18869.amd64fre.win7sp1_gdr.150525-0603 

System Uptime: 0 days  0:00:19.344 

Probably caused by : HIDCLASS.SYS ( HIDCLASS+26d7 )  

BugCheck A, {0, 2, 0, fffff800038cd822} 
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL  (a)
HIDClass BSODs can mean you have a corrupted or incompatible USB device or driver connected. Since you are having problems on startup I would recommend removing all USB devices and test to see what happens.

You have a driver named MayPro.sys. This is for a gamepad of some sorts (haven't researched yet) and has caused at least one BSOD with a quick search. Remove the gamepad if its connected and/or uninstall the driver and see if that helps.
Code:
fffff880`06fe3000 fffff880`06fed000   MayPro     (deferred)             
    Image path: \SystemRoot\System32\Drivers\MayPro.sys
    Image name: MayPro.sys
    Browse all global symbols  functions  data
    Timestamp:        Sun Aug 12 13:27:44 2007 (46BF4310)
    CheckSum:         0000FD9B
    ImageSize:        0000A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Can you boot into Safe Mode ok?
My System SpecsSystem Spec
28 Jul 2015   #3
Squakk

Windows 7 Professional 64-bit SP1
 
 

Hello Gator, thanks for the prompt response.

Yes, the Maypro driver was for a PS2 controller to USB adapter I was using, and it was indeed plugged in. I've been using it for a few years now and it hasn't ever caused me trouble before. I did unplug the adapter and uninstalled the driver to be safe.

Because the error is intermittent/infrequent, I can't tell for sure if this was my problem. If I come across the issue again, I will update with a new log. Meanwhile, is there anything else I should do or did you see an anything else that was amiss? Yes, I can boot into safe mode just fine.

Thanks.
My System SpecsSystem Spec
.

28 Jul 2015   #4
Gator

Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
 
 

Not really, all of your BSOD's pointed to the same cause. If everything is fine without it plugged in, try booting without it and plugging it in afterwards. If that helps it may be tedious but you could just unplug the controller when you turn off the PC or turn it on..
My System SpecsSystem Spec
28 Jul 2015   #5
Squakk

Windows 7 Professional 64-bit SP1
 
 

Ok then, I'll see how it goes for the next few days. If everything seems fine, I'll mark this as solved.

Thanks again! Let's hope this'll be my last post.
My System SpecsSystem Spec
Reply

 Intermittent BSOD, "Windows Failed to Start" upon boot




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Black Screen upon Win7 logon, now result in "Windows Failed to Start"
Yesterday I started having problems with my Windows 7 Professional 64-bit desktop machine. Here's the sequence of events I would encounter: I would start the computer, logon normally, and about 3 minutes after I logged on my video would go black, monitor lights blinking like there was no signal,...
General Discussion
Turn on PC - "Windows failed to start" - Launch startup repair - BSOD!
Hi, first post. I can't follow the guidelines and put any information from the BSOD, because I can't boot my computer. However, I've taken a picture of the blue screen, if that's of any help. Picture: http://i.imgur.com/faUQAZs.jpg This is the process up till the BSOD: 1. Turn on computer...
BSOD Help and Support
"Windows failed to start", won't allow me to boot from CD/DVD drive
Hey guys, Recently my iTunes went haywire and froze my computer, and when I rebooted it, I got the error: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2. Choose...
General Discussion
"Windows has failed to start" error after installing new parts
I've been trying to change the motherboard and cpu in my current computer. After hooking everything up, the computer runs till the windows 7 loading screen, then stalls and restarts. Upon restart I'm brought to the "windows has failed to start" message and attempting to repair through that yields...
Hardware & Devices
windows failed to start with "ynhif is compressed" error
A friend who has an Aspire One with Win7 Starter asked me to help, his computer wouldn't boot. It would go through the bios part of the boot and then very quickly it would show an error saying "ynhif is compressed" and stop there. The error would come up so fast it was as if Windows wasn't even...
General Discussion
"Windows failed to start..." Recovery disk is unable to recover Win.
Hi all. Earlier today I was playing around with Windows 8 Developer Preview inside of Virtualbox. I tried to install the VB guest additions (which allows copy-paste between guest and host, as well as other things) and was told to restart the computer. So I restarted the VM and got the new version...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App