Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ps3 joystick/usbs lock up pc, flashing new BIOS causes BSOD 0x000007B

29 Jul 2015   #1
TerminusEst

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
ps3 joystick/usbs lock up pc, flashing new BIOS causes BSOD 0x000007B

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
ASUSTeK COMPUTER INC. Z97-AR
8.00 GB (2x4) Kingston HyperX Beast Memory
Sapphire Dual-X AMD R9 280 Graphics Card - 3GB GDDR5, 384-bit
(1) AMD High Definition Audio Device (2) Realtek High Definition
1920 x 1080 x 32 bits (4294967296 colors) @ 60 Hz
Seagate 2TB Barracuda

Hello I hope you can help me out. I have been encoutering strange problems with my PC last few weeks and this one causing me the most problems, I have tried system restore off the hdd and a win 7 64bit ultimate dvd without help. I have tried bootrec /fixmbr, bootrec /fixboot and bootsect /nt60 all.

I am unable to get chkdsk /f to work as anytime I schedule it through a windows CD or Windows Safe mode it never seems to actually be scheduled the BSOD pops up again.

Please help I am trying to at least get back into this windows and use AcdSee for a few hours to export a backup of the database which has a lot of important work with metadata/tags. Thank you in Advance.

1) I have have been having problems with my pc for the last few weeks, the most recent was anytime I plugged in a ps3 joystick into any usb 2 or 3 port the screen would turn into crazy colours and the pc locks up. Last thing I did was flash my BIOS in hoping that and installing new USB drivers things would get fixed. I believe that flashing my BIOS might have reset the HDD AHIC/IDE setting and so I was unable to boot into Windows, trying either HDD Bios setting now I get the BSOD screen below.

2) BSOD:
A problem has been detected and windows has been shut down to prevent damage to your computer
if this is the first time you've seen this stop error screen, restart your computer.
if this screen appears again, follow these steps:

check for viruses on your computer. remove any newly installed hard drives or hard drive controllers.
check your harddrive to make sure it is properly configured and terminated.
run chkdsk /f to check for hard drive corruption, and then restart your computer

technical information

*** STOP: 0x000007B (oxFFFF88009a97e8, oxFFFFFFFC000034 etc...

3) and this Windows Safe mode message

Problem signature:
problem event name: bluescreen
os version 6.1.7601.2.1.0.256.1
locale id 1033

additional information about the problem:
bccode c4
bcp1 = 00000000000000E3
bcp2 = FFFFF88006C81871
BCP3 = 000000076E6E69A0
BCP4 = 0000000000000000
OS Version = 6_1_7601
service pack 1_0
product 256_1

Files that help describe the problem:
c:\windows\minidump\072815-40419-01.dmp
c:\windows\Temp\WER-52665-0.sysdata.xml

DM LOG COLLECTOR zip file:


My System SpecsSystem Spec
.
29 Jul 2015   #2
Laith

Windows 10 Professional x64
 
 

Hiya and welcome to SevenForums!

Code:
BugCheck C4, {e3, fffff88006c7e871, 77aee9a0, 0}

Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+24871 )
Code:
BugCheck D1, {fffff8800819d638, 2, 8, fffff8800819d638}

Unable to load image \SystemRoot\system32\DRIVERS\MijXfilt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
Code:
BugCheck 124, {0, fffffa80090b3028, be000000, 800400}

Probably caused by : hardware
Code:
MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE
Code:
BugCheck 18, {fffffa8006ce45b0, fffffa800b5e7c20, 1, 1}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+279e0 )
Please run Prime95, if the temps goes too high, exit the test. Hardware - Stress Test With Prime95

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use

Remember to remove Catalyst and only install the graphics driver.

Remove avast! and install Microsoft Security Essentials(MSE) for testing purposes.

Disable Driver Verifier.

You have Motioninjoy as your PS3 controller emulation tool. Remove that straight away, from my experience Motioninjoy has corrupted many many system files so i was forced to re-install windows. The damage may be already done. I recommend if you want to use something to emulate your PS3 controller use Scarlet Crush.aka.ScpVBus/ScpVMonitor.
My System SpecsSystem Spec
04 Aug 2015   #3
TerminusEst

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Everything Seems to be working

Hello Laith, thanks!!! for all of your help and time. I did everything you said, with a minor change I ran OCCT and FurMark instead of Prime95 (I heard they cause harm to the I7 4790K chips). I never saw temps past 72 after 15 min or so on each stress test. I did a chkdsk /f as well and I'll run hd tune pro later today to check for hdd bad sectors just in case.

I have yet to try to plug a ps3 controler into the pc. I will get the new drivers for ps3 that you recommend.

Here is the new DM Log Collector information zip file, after doing everything you have recommended.
My System SpecsSystem Spec
.

05 Aug 2015   #4
Laith

Windows 10 Professional x64
 
 

Hmm,
Code:
BugCheck C4, {e3, fffff88006c2d871, 77a1e9a0, 0}

Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+24871 )
This is avast!. Disable Driver Verifier and remove avast! for testing purposes.
My System SpecsSystem Spec
Reply

 ps3 joystick/usbs lock up pc, flashing new BIOS causes BSOD 0x000007B




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Flashing BIOS - ROM file does not match existing BIOS size
BIOS problem occured when I upgraded graphicscard, see my other thread. http://www.sevenforums.com/graphic-cards/369892-computer-soundcard-boot-problems-after-upgrading-graphicscard-gtx-960-a.html#post3065951 I started this thread because it is a bios problem. I downloaded the driver 2.09...
General Discussion
Help ASAP: BSOD 0x07B after flashing new updated bios
I know im supposed to install a program and run tests with it to get logs and info and such, but thats just not possible. This PC will not boot at all. It just says STOP: 0x07B. Tried startup repair. Said it was successful, but still got a BSOD. Not much else i can say unfortunately.
BSOD Help and Support
Bios Flashing
I've got theAsusP8z77-vMotherboard with revision Board: ASUSTeK COMPUTER INC. P8Z77-V Rev 1.xx The page for Asus support says an update is available : P8Z77-V BIOS 1606, but it also says that there is a risk of data loss. So, the questions is : Should I or Shouldn't I...:confused:
Hardware & Devices
BSOD After Flashing BIOS, Unknown Error
So this issue that I've had has occurred many times in the past. My motherboard is an MSI 970A-G45 and it works fine just the way it is (with the exception to the fact that the machine can't sleep or hibernate). I figured that flashing the BIOS would fix that problem, but when I did, Windows 7...
BSOD Help and Support
Lots of BSOD, lock ups, hard drive not being detected by bios, is it f
Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a...
BSOD Help and Support
bios flashing
Hi all just wondering how do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio.... if someone could let me know how to go about this i wound be ever so greatful NOTE: I have the right bios...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App