Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequently 0x0A error when first boot of the system

03 Aug 2015   #1
edmondhk

Windows 7 Ultimate x64
 
 
Frequently 0x0A error when first boot of the system

My PC frequently 0x0A error when its first boot in system. It happen before it show the account selection, the page for me to click on my account and enter the password.

I have tried update my display card driver, windows update is on.
I also done the sfc /scannow, it return some file is damaged but can't be fix. I have uninstalled the related windows update but it still the same. Please also see the CBS log.


My System SpecsSystem Spec
.
03 Aug 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, edmondhk. If you would, I need your detailed system specs

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

I looked at your last 5 dump files this is what they said. Each was one or the other.

Code:
Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 0, fffff80004c5e509}

*** WARNING: Unable to verify timestamp for kltdi.sys
*** ERROR: Module load completed but symbols could not be loaded for kltdi.sys
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )

Code:
Followup: MachineOwner

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80004cd4cd6}

Probably caused by : tcpip.sys ( tcpip!IppRestructureHashTableUnderLock+39 )

Followup: MachineOwner
NETIO is a windows file provided by windows update that controls all network I/O operations.

tcpip is another windows update file that deals with networking. It seems to be network related and either failed updates or corrupted ones.

Please open installed updates from Windows update and see if you have either of these Windows updates. I know you said you uninstalled an update, but make sure both of these is uninstalled. KB3022345 and KB3068708. Then please run sfc /scannow again from an elevated command prompt.You may have to run it 3 times with reboots in between each time.

I would also update yout Lan driver from your motherboard's web site. Try that and let me know how it goes.
My System SpecsSystem Spec
03 Aug 2015   #3
edmondhk

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
Hello, edmondhk. If you would, I need your detailed system specs

Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

I looked at your last 5 dump files this is what they said. Each was one or the other.

Code:
Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 0, fffff80004c5e509}

*** WARNING: Unable to verify timestamp for kltdi.sys
*** ERROR: Module load completed but symbols could not be loaded for kltdi.sys
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )
Code:
Followup: MachineOwner

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80004cd4cd6}

Probably caused by : tcpip.sys ( tcpip!IppRestructureHashTableUnderLock+39 )

Followup: MachineOwner
NETIO is a windows file provided by windows update that controls all network I/O operations.

tcpip is another windows update file that deals with networking. It seems to be network related and either failed updates or corrupted ones.

Please open installed updates from Windows update and see if you have either of these Windows updates. I know you said you uninstalled an update, but make sure both of these is uninstalled. KB3022345 and KB3068708. Then please run sfc /scannow again from an elevated command prompt.You may have to run it 3 times with reboots in between each time.

I would also update yout Lan driver from your motherboard's web site. Try that and let me know how it goes.
Thank you sir, I will try to deal with my NIC, which is a boardcom one.
I have also updated my PC spec.
My System SpecsSystem Spec
.

03 Aug 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Check your Windows Updates too. Both of those are Windows Update files. It could be a corrupted OS or a bad network driver. Also, I see you have a Gigabyte Motherboard. If you have any of the Gigabyte Utilities, I would uninstall every one of them. Gigabyte utilities are known to cause BSODs.
My System SpecsSystem Spec
04 Aug 2015   #5
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Just noticed.

From system specs.

Quote:
PSU Antec EA380
Recommended min. for Graphics Card MSI NVDIA GTX660 is a 450W.
My System SpecsSystem Spec
04 Aug 2015   #6
ranchomirage

W10, 8.1
 
 

Kaspersky driver kltdi.sys caused at least 1 bsod . it can be seen in first code box.

update Kaspersky programs or remove them using removal tool. I would go for removal - Service articles

tcpip.sys and netio.sys are Microsoft networking related drivers. neither is at fault here nor is either corrupted nor is os corrupted (if so, 0x109 kernel corruption bsods would be the order of the day). tcpip.sys and netio.sys are just defaults here, just like other ms drivers that show up in dumps are.
My System SpecsSystem Spec
04 Aug 2015   #7
edmondhk

Windows 7 Ultimate x64
 
 

Dear all,

I have update my boardcom NIC driver, remove KB3022345 and KB3068708.
Now I get my sfc clean. Now see will it happen again in tormorrow.
Thanks you all for your kindly help.
My System SpecsSystem Spec
12 Aug 2015   #8
edmondhk

Windows 7 Ultimate x64
 
 

Unfortunately, It happen again.
Here is the fresh dump
My System SpecsSystem Spec
12 Aug 2015   #9
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

edmondhk, this is what your dump file said

Code:
Use !analyze -v to get detailed debugging information.
BugCheck A, {10, 2, 0, fffff80004c6c509}
*** WARNING: Unable to verify timestamp for kltdi.sys
*** ERROR: Module load completed but symbols could not be loaded for kltdi.sys
Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )
Followup:     MachineOwner
kltdi is your Kaspersky Network Filtering, NETIO is the Network Manager. You arte obviously having some kind of network problems, possibly caused by your illegal operating system.

You have an OEM_SLP version of windows from an HP computer installed on a Retail Gigabyte motherboard, which is not possible without a hackers exploit to make it activate. A hackers exploit alters system files which will eventually cause problems.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.





My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a Genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them
My System SpecsSystem Spec
Reply

 Frequently 0x0A error when first boot of the system




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD whilst idling. Error 0x0a
I have recently over the last few days been coming back to my computer after using it, to find it has restarted. I have turned off the Auto Restart and got a BSOD report. driver_irql_not_less_or_equal Attached here: Can't seem to work out what I should be looking for in the reports so...
BSOD Help and Support
BSOD on after logging in, error 0x0a
Built this pc for a friend and while it doesnt happen everytime fairly often it gets a BSOD after logging into a profile. I have updated all drivers and switched anti-virus programs but it still happens. uploaded latest dump files.
BSOD Help and Support
BSOD playing LOL , error 0x0A
So , ahm , i've a bsod when i go play LOL It's 0x0a irql_not_less_or_equal So, anyone help me plz, :D Sometimes , i've 0x3b , 0x7e, idk , help me, i want to play LOL Xd
BSOD Help and Support
BSOD system won't boot, error 0x0000007e cannot boot to safemode
Hello, I have been looking through this site for the last couple of days. The situation: My Windows 7 64 bit machine will not boot. It keeps going into Windows System recovery mode. I have tried that multiple times and rebooted each time but no luck. System specs - Windows 7 64 bit, 16gb ram....
Backup and Restore
0x0a and 0x01e error
ive had this laptop for the past few weeks and ive had random crashing issues mostly blue screen. I would like help to find out what could be crashing and why i am experiencing this issue and what i can do to fix it. Its a toshiba laptop with 64 bit OEM install of windows 7. I am not a hundred...
BSOD Help and Support
Stop 0x0a Irq_not_less_or_equal during boot process
I fixed my memory BSODs by getting some new RAM, but this BSOD is still giving me some issues. I've updated my drivers as best I could. Some I couldn't find any drivers for since I just got this system a week ago, and the Sandy Bridge stuff came out in January. Anyways, I'm running Windows 7...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App