Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD (error 116) after reinstalling windows 7 drivers

07 Aug 2015   #11
Laith

Windows 10 Professional x64
 
 

First of all, don't do it from device manager. The driver will come with an installer, use that. Don't use Windows Update to update your drivers. WU has very bad drivers.


My System SpecsSystem Spec
.
07 Aug 2015   #12
Katsy

Windows 7 Home Premium 32 Bit
 
 

So when i downloaded the driver from Dell, it extracts it into my system and automatically starts up the AMD client. I'm not sure as to how to install the driver without installing the AMD client in the process. I've attached an image on the file I see on my computer. I'm going to run DDU again.
My System SpecsSystem Spec
07 Aug 2015   #13
Laith

Windows 10 Professional x64
 
 

Hm, let the AMD driver install with the client.
My System SpecsSystem Spec
.

07 Aug 2015   #14
Katsy

Windows 7 Home Premium 32 Bit
 
 

Okay, so i selected a custom installation using the client. Which of these should I not install?
My System SpecsSystem Spec
07 Aug 2015   #15
Laith

Windows 10 Professional x64
 
 

Uncheck Catalyst control center.
My System SpecsSystem Spec
07 Aug 2015   #16
Katsy

Windows 7 Home Premium 32 Bit
 
 

it unchecks microsoft visual C++ at the same time. Is that fine?
My System SpecsSystem Spec
07 Aug 2015   #17
Laith

Windows 10 Professional x64
 
 

Yes, it is.
My System SpecsSystem Spec
07 Aug 2015   #18
Katsy

Windows 7 Home Premium 32 Bit
 
 

I restarted it still gives me BSOD
My System SpecsSystem Spec
07 Aug 2015   #19
Laith

Windows 10 Professional x64
 
 

Hmm, run Furmark. If the temps goes too high stop the test. Video Card - Stress Test with Furmark
My System SpecsSystem Spec
07 Aug 2015   #20
Katsy

Windows 7 Home Premium 32 Bit
 
 

It could not start up. "Could not initialize ZoomGPU FurMark startup failed.Bye"
My System SpecsSystem Spec
Reply

 BSOD (error 116) after reinstalling windows 7 drivers




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
116 BSOD, even after replacing graphics card and reinstalling drivers
Here's my original thread at MS forums: Lots of random BSODs, trying to figure out what is going bad - Microsoft Community There are links to dump files and bluescreenview screenshots there and a description/history of the problem. Turns out my old GTX 680 did have some issues which were...
BSOD Help and Support
BSOD 0x0000001e after reinstalling windows and installing drivers
Title says it all really, after I reinstalled windows 7 ultimate, and installed all the drivers, i got the BSOD a few minutes after i finished the audio drivers. Log file is attached (ignore the computer name...), any help would be super appreciated. Thanks!
BSOD Help and Support
BSOD after reinstalling drivers + win 7 on a new hard drive
Hello, I was in the process of updating my drivers on a new hard drive (Old one failed), after re-installing windows 7 on it, when i got a BSOD. I feel like it might have something to do with one of the drivers i installed/re-installed, but the log's below so feel free to have a look. I've...
BSOD Help and Support
Drivers can't be installed after reinstalling windows 7.
I've recently reinstalled windows 7 64 bit. The drivers for PCI controller ethernet controller, SM Bus controller, USB controller and an unknown device. PCI Simple communications controller PCI\VEN_8086&DEV_1E3A&SUBSYS_77561462&REV_04 PCI\VEN_8086&DEV_1E3A&SUBSYS_77561462...
Drivers
Reinstalling Windows 7: Drivers missing
Hey, I had serious problem with Windows 8 Release Preview and had to fully reinstall Windows 7 (Home Premium x64) on my HP Pavillon g6. The problem is that a lot of drivers are missing, especially network related drivers. I can't connect to any network. Please, I really need help. Thanks.
Installation & Setup
Install new RAID drivers without reinstalling Windows 7?
Hello there, I am moving drives to new computer and therefore I need help. I would like to know if there is any possibility to install new RAID drivers without fresh reinstalling Windows (W7 professional x64). Only idea which comes to my mind is booting from W7 install disc and trying...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App