Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Playing games, driver maybe? error 0x116

09 Aug 2015   #1
Pharanoia

Windows 7 Ultimate x64
 
 
BSOD Playing games, driver maybe? error 0x116

Hello

I've been having a lot of troubles since i upgraded my hardware, games crashing, BSOD and pc reboots (at least this one was solved), i tried almost everything since updating bios to lates (beta) putting it the old ones, clean install, tried almost 7 different drivers, almost everything i looked on the internet but without being able to solve it . Hope you guys could help.

Plus, no overheating shown by MSI Afterburner

Thanks in advance.


My System SpecsSystem Spec
.
09 Aug 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Pharanoia mat where did you get this oS form as I have a nasty feeling it is pirated or a very old media the version I have marked in red should read 7601 - that is it has service pack 1 (SP1) included which version 7600 does not.

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.17336 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\John\AppData\Local\Temp\Temp1_GHOST-09_08_2015__20947,61.zip\080915-12308-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is: 
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`03004000 PsLoadedModuleList = 0xfffff800`03241e50
Debug session time: Sun Aug  9 17:00:30.735 2015 (UTC + 10:00)
System Uptime: 0 days 0:39:22.234
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
My System SpecsSystem Spec
09 Aug 2015   #3
Pharanoia

Windows 7 Ultimate x64
 
 

I'll update win 7 tomorrow and make a few test to report back
My System SpecsSystem Spec
.

09 Aug 2015   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok if you go to Start and type in the box "msinfo32" (no quotation marks) it should bring up your system info as in my pic see what it says there. I do stand to be corrected though if you have some form of multi machine setup but it does look odd.
My System SpecsSystem Spec
09 Aug 2015   #5
Laith

Windows 10 Professional x64
 
 

Hiya and welcome to SevenForums!
Thought you might need a little help, ICIT2LOL,
Code:
BugCheck A, {fffff88005569930, 2, 0, fffff800030a78d5}

Probably caused by : memory_corruption ( nt!MiDeletePteRun+4e5 )
Code:
BugCheck 116, {fffffa8009d7c010, fffff88006a55cac, 0, 2}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+ccac )
Code:
BugCheck 50, {fffffa800a276028, 0, fffff800030e5694, 2}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+194 )
Code:
BugCheck 3B, {c0000005, fffff96000174283, fffff88008278020, 0}

Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )
Code:
BugCheck 19, {22, 2000000, 0, 0}

Probably caused by : dxgkrnl.sys ( dxgkrnl!DXGDEVICE::DestroyAllocations+715 )
Code:
BugCheck 7F, {8, 80050033, 406f8, fffff800030ca301}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
Code:
BugCheck 50, {ffffffffffffffc8, 0, fffff880113da22e, 0}


Could not read faulting driver name
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::UnmapVideoApertureSegmentInternal+c2 )
Code:
BugCheck F7, {6696049, f8800129301e, ffff077ffed6cfe1, 0}

Probably caused by : hardware ( Ntfs!_report_gsfailure+26 )
Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

Run MemTest86+, It must be MemTest86+. RAM - Test with Memtest86+

Check for viruses using Malwarebytes Malwarebytes Anti-Malware Free

Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use
My System SpecsSystem Spec
09 Aug 2015   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Thanks Laith I was going to suggest the sfc and chkdsk but the build number threw me because it looks like it has not got SP1

The memtest if we are going to run it I have a little ditty to explain it - sticks and slots

Suppose we shall have to hear back before we can do anything really.
John
My System SpecsSystem Spec
09 Aug 2015   #7
Laith

Windows 10 Professional x64
 
 

No problem
Yup, he should update to SP1 ASAP, as it's important.
That's handy, good thing that we have such a hardware expert around here
Yup, we'll just wait and see.
My System SpecsSystem Spec
09 Aug 2015   #8
Pharanoia

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Laith View Post
No problem
Yup, he should update to SP1 ASAP, as it's important.
That's handy, good thing that we have such a hardware expert around here
Yup, we'll just wait and see.
So i just intall SP1 or all updates?
My System SpecsSystem Spec
09 Aug 2015   #9
Laith

Windows 10 Professional x64
 
 

All updates including SP1.
My System SpecsSystem Spec
09 Aug 2015   #10
Pharanoia

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Laith View Post

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

Run MemTest86+, It must be MemTest86+. RAM - Test with Memtest86+

Check for viruses using Malwarebytes Malwarebytes Anti-Malware Free

Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use
Well, i've runned all test and it seems i was the almost 220 viruses detected by Malwarebytes, all other test succeed, installed updates... Now, do i start testing the pc or run DM Log Collector again?
My System SpecsSystem Spec
Reply

 BSOD Playing games, driver maybe? error 0x116




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD in vid games, error 0x116
Hello everybody, this is my story : I bought this laptop 10 months ago, and 3 days ago i start having two bsod's. First time, i had the atikmpag.sys bsod ( "attempt to reset the display driver and recover from timeout failed" ) when i was starting games, so i guessed it is because the other vid...
BSOD Help and Support
BSOD playing games error 0x116, nvlddmkm.sys (display driver timeout)
Have been having this problem for a while now. From reading the forums I figured it must've been a faulty VGA. Tech support has replaced it for a brand new and have also given me a new PSU/Power Brick. Whenever I tried to do anything that was VGA-demanding, it would blue screen on me, even after...
BSOD Help and Support
BSOD playing World of Warcraft, error 0x116 TDR
Hello So a few days ago everything was working fine. Then I went to my friends house and I came back the day after. I booted up my PC and started browsing the internet. After a while I decided to fire up World of Warcraft. I logged in and usually the FPS count is pretty low(10 fps) untill the...
BSOD Help and Support
BSOD playing various games, error 0x116 and 0xC2
Hello and thank you for your time, I have one BSOD issue that's been pretty persistent 0x116, but it only happens in certain games. So far, I've tested 4 games and it's consistently crashing in WoW and Dungeon Defenders: Eternia. Initially I thought it was the latest nVidia driver update because...
BSOD Help and Support
BSOD Playing Video Games, Error: VIDEO_TDR_ERROR, nvlddmkm.sys 0x116
Hello everybody, I'm sorry if I am breaking any rules or posting this in the wrong place, this is my first post! My computer BSOD's whenever I play video games (LOL, WOW, etc.) after about 10 minutes of game play. I have tried re-installing my drivers but that's all I know how to do, I have no...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App