Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random hangs/restarts, with 1 BSOD in safe mode after clean install

10 Aug 2015   #11
CyCoSys

Windows 7 Pro x64
 
 

No my SSD died, this is a re-install on a new HDD. Thats why I thought maybe a Sata controller might be causing this. I've only had these problems since it died a month ago.


My System SpecsSystem Spec
.
10 Aug 2015   #12
Laith

Windows 10 Professional x64
 
 

My System SpecsSystem Spec
10 Aug 2015   #13
CyCoSys

Windows 7 Pro x64
 
 

Ok the Seatools for windows didn't work (no drives listed), so ran the DOS version and both Short and Long Tests PASSED.
My System SpecsSystem Spec
.

10 Aug 2015   #14
Laith

Windows 10 Professional x64
 
 

Run all the tests, including the generic one.
My System SpecsSystem Spec
10 Aug 2015   #15
CyCoSys

Windows 7 Pro x64
 
 

There is no generic test in the DOS version, only short, long and acoustic. And I can't hear anything in the acoustic test.
My System SpecsSystem Spec
10 Aug 2015   #16
CyCoSys

Windows 7 Pro x64
 
 

ok I'm going to start trying driver verifier..
My System SpecsSystem Spec
11 Aug 2015   #17
Laith

Windows 10 Professional x64
 
 

Okay.
My System SpecsSystem Spec
11 Aug 2015   #18
CyCoSys

Windows 7 Pro x64
 
 

My second BSOD to occur, but I'm afraid I don't think it's related to my problem. If I'm reading it right, it's zone alarm firewall, but the windows hang problem preceded this installation. I'll disable it though in the mean time to avoid more conflicts with DV.
My System SpecsSystem Spec
11 Aug 2015   #19
Laith

Windows 10 Professional x64
 
 

Code:
BugCheck 50, {fffff6f850013718, 0, fffff80002b95c25, 5}

Unable to load image vsdatant.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vsdatant.sys
*** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys

Could not read faulting driver name
Probably caused by : vsdatant.sys ( vsdatant+4bf3a )
This is your Zone Alarm TrueVector Device Driver, update it.
My System SpecsSystem Spec
11 Aug 2015   #20
CyCoSys

Windows 7 Pro x64
 
 

I am starting to pull my hair out with this, windows is continuing to freeze, but I am not getting any more BSOD. Should I change DV to check MS drivers as well?
My System SpecsSystem Spec
Reply

 Random hangs/restarts, with 1 BSOD in safe mode after clean install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System will only start in Safe mode, Clean virus in safe mode
I recently attempted to clean my brother's computer after he aquired a virus from the torrent file program he uses. Regardless, I cleaned a trojan and a backdoor from his system from safe mode. I can not boot in normal mode. Everytime i try the system gets hung up at the windows loading screen...
General Discussion
windows 7 boots into safe mode after clean install no matter what i do
I have clean installed windows 7 ultimate 64 several times on my HP Pavilion DV6, and no matter what it always boots into safe mode w/o networking. I have brought up the boot options, selected start windows normally, and it still boots into safe mode. does anyone have any idea how to get it to boot...
Installation & Setup
SYstem hangs when opening apps in Normal Mode, OK in Safe Mode
I have been having problems opening any files or using Internet when booting up in normal Mode, system is slow and eventually hangs. I have run all of the virus SW, and even some driver repair programs. Have tried recovering to earlier date, still problems. I don't want to do a total recovery and...
General Discussion
BSOD in normal and clean boot, runs fine in safe mode
Hi, after connecting and disconnecting some external HDD using USB to my pc, BSOD keeps showing constantly after 5 minutes from booting to windows . I checked RAM, and it urned out to be in good shape, then i tried Registry cleaning, but nothing changed . It works very well and stable under...
BSOD Help and Support
After Clean Install Windows 7 -Cant Boot Normally,Safe Mode or To Disk
Hi all, my first post and I've spent many hours looking for a thread exactly like mine but couldnt find one so felt the need to post as Im completely stuck. The background of where i am at is my computer was starting to become very slow on start up (30 mins). I'd turn off everything via...
General Discussion
After Installation, hangs unless safe mode
I have recently installed a Windows 7 on my machine after reformatting the computer. The installation completes with no problems, but after the very first time loading up the desktop it quickly freezes, or sometimes runs extremely . When I reboot the computer, after the 4 colored windows merge to...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App