Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help please kernell error

10 Feb 2009   #1
manu3ll

Windows 7 build 7000
 
 
Help please kernell error

I have this problem since I installed W7 x64 build 7000
My system is Gigabyte Ga P35-DS3
Intel Core Duo E6300
Kingston 1GB 800Mhz
Gigabyte GeForce 8600GT
SATA HDD 250 GB

My suppose is that it's either the USB controller or the HPET function.When I start my computer with the USB Controller Disabled I don't get a BSOD,but when it's enabled I get it.I also use an USB modem,but I don't think it's causing any problems as I tested it on another computer.Also the VGA and RAM are tested and they are good.The settings in BIOS are good,HPET is enabled by the way. I heard that the problem might have been the SB on MB,when overheating,but I mounted a fan there, and nothing.The problem still persists.The only way for this computer to not get a BSOD is to disable the USB Contr,but without it I don't have an internet access so it's not an option.

Code:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" /> 
 
<EventID>41</EventID> 
 
<Version>2</Version> 
 
<Level>1</Level> 
 
<Task>63</Task> 
 
<Opcode>0</Opcode> 
 
<Keywords>0x8000000000000002</Keywords> 
 
<TimeCreated SystemTime="2009-02-09T13:55:58.956813100Z" /> 
 
<EventRecordID>7381</EventRecordID> 
 
<Correlation /> 
 
<Execution ProcessID="4" ThreadID="8" /> 
 
<Channel>System</Channel> 
 
<Computer>Noi-PC</Computer> 
 
<Security UserID="S-1-5-18" /> 
 
</System>
 
 
- <EventData>
<Data Name="BugcheckCode">10</Data> 
 
<Data Name="BugcheckParameter">0x270ce8</Data> 
 
<Data Name="BugcheckParameter">0x2</Data> 
 
<Data Name="BugcheckParameter">0x0</Data> 
 
<Data Name="BugcheckParameter">0xfffff800028f6453</Data> 
 
<Data Name="SleepInProgress">false</Data> 
 
<Data Name="PowerButtonTimestamp">0</Data> 
 
</EventData>
 
 
</Event>



My System SpecsSystem Spec
.

11 Feb 2009   #2
Saltgrass

Windows 7 x64
 
 

It may not be the USB modem, but the drivers used for it. Have you tried removing it or disabling it and booting?

If disabling the modem doesn't help, the logical next step would be to reinstall the USB drivers. Are you using the W7 supplied chipset drivers, or the motherboard's?

During the Vista Beta, I had a PCI modem that would always cause a BSOD if enabled during boot. If I wanted to use it, I had to enable it after boot-up. Modem worked fine otherwise.
My System SpecsSystem Spec
11 Feb 2009   #3
manu3ll

Windows 7 build 7000
 
 

I am using the W7 supplied drivers and I didn't disabled the usb modem yet.As I stated before, I used this modem on another configuration and there was no problem.I used it for at least 6 months and there was no problem.But I will try to update the drivers if there is an update.
Thanks
My System SpecsSystem Spec
.


Reply

 Help please kernell error




Thread Tools





Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App